Autel AutoLink AL329 AL529 AL529HD OBD Code Read Diagnostic Scanner Diesel Truck - Autel AutoLink AL529HD
Autel AutoLink AL329 AL529 AL529HD OBD Code Read Diagnostic Scanner Diesel Truck - Autel AutoLink AL529HD
Autel AutoLink AL329 AL529 AL529HD OBD Code Read Diagnostic Scanner Diesel Truck - Autel AutoLink AL529HD
Autel AutoLink AL329, with its patented One-Click I/M Readiness Key, enables user to check State ёmission Monitor Status and verify repairs. Read and Erase codes on domestic, Asian and European vehicles, 1996 and newer.
• Compatible with domestic, Asian and European vehicles, 1996 and newer: work with all OBD II compliant vehicles, including those equipped with Control Area Network (CAN) protocol. The EPA requires all domestic, Asian and European vehicles, 1996 and newer (including light trucks), sold in the United States must be OBD II compliant.
• Auto VIN to quickly read & clear DTCs: VIN will be automatically displayed when manufacturer specific codes are read.
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Reads and displays I/M monitor (ёmissions) status
• Views Freeze Frame Data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Clears codes, resets monitors and turns off malfunction indicator light (MIL)
• Reset check engine light
• Graph, record and playback live data
• Easy plug-in and scan operation
• Multi Lingual
Autel AutoLink AL529 OBDII Code Reader supports all 10 modes of OBDII test for complete vehicle diagnostics. The easy-to-use tool features a TFT color display and built-in speaker for visual and audible message cues and the patented One-Click I/M Readiness Key.
• AutoVIN function for quickly identifying manufacturer-specific codes
• Reads enhanced codes in Power-train system for Ford, for GM and for Chrysler
• Compatible with domestic, Asian and European vehicles, 1996 and newer
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Enhanced OBD II Mode 6 • Displays live O2 sensor test data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Views freeze frame data • Graphs data
• Reads live PCM data stream
• Reads, stores and plays back live sensor data
• Troubleshooter code tips aid technician in efficient vehicle diagnostics and vehicle repair
• Bright color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
• Multilingual (including English, Spanish and French) menu and DTC definitions
• Internet Updatable • Prints data via Windows PC
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autel AutoLink AL529HD not only supports OBD II Diagnostics for gasoline vehicles, but also supports two more protocols for high-duty vehicle: J1939 and J1708. When more than one vehicle control module is detected by the scan tool, you will be prompted to select the module with retrievable data. The Power train Control Module [PCM] and Transmission Control Module [TCM] are the most commonly scanned modules.
CAUTION: Don’t connect or disconnect the scan tool with the ignition is on or engine running.
Read Codes:
Stored Codes: are also known as “hard codes”, which are fault codes, or trouble codes that have been stored in the vehicle computer memory because the faults have reoccurred for more than a specified amount of key-cycles.
Pending Codes: are also referred to as “maturing codes” or “continuous monitor codes”. They indicate problems that the control module has detected during the current or last driving cycle but are not as yet considered serious.
Permanent Codes: are DTCs that are "confirmed" and are retained in the non-volatile memory of the vehicle’s computer until the appropriate monitor for each DTC has determined that the malfunction is no longer present and is not causing the MIL. Permanent DTCs are stored in nonvolatile memory and can not be erased by any diagnostics service or by disconnecting power to ECU.
NOTE：Permanent Codes function is available only for vehicles supporting the CAN protocols.
View Data and Freeze Frame Data: you can view live or real time PID data of vehicle’s computer module(s), and view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
Record Data: Allows recording vehicle modules’ Parameter Identification (PID) data to help diagnose intermittent vehicle problems. A recording includes 5 frames of live data before trigger event and several frames after trigger event. But for high-duty vehicles, only View Data is supported for now.
On-Board Monitor Test: It’s useful after servicing or after erasing a vehicle’s control module memory. The On-Board Monitor Test For non-CAN equipped vehicles and CAN-equipped vehicles retrieves and displays test results for power train components and systems that are not continuously monitored. The scan tool allows access to the results of on-board diagnostic monitoring tests for specific components/systems. The advanced feature enables you to read the definition of an On-Board Diagnostic Monitor ID.
NOTE: The scan tool will display a test definition if this definition is present in the vehicle’s computer memory. If no such definition is present, the scan tool will only display the Test IDs.
• Compatible with domestic, Asian and European vehicles, 1996 and newer: work with all OBD II compliant vehicles, including those equipped with Control Area Network (CAN) protocol. The EPA requires all domestic, Asian and European vehicles, 1996 and newer (including light trucks), sold in the United States must be OBD II compliant.
• Auto VIN to quickly read & clear DTCs: VIN will be automatically displayed when manufacturer specific codes are read.
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Reads and displays I/M monitor (ёmissions) status
• Views Freeze Frame Data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Clears codes, resets monitors and turns off malfunction indicator light (MIL)
• Reset check engine light
• Graph, record and playback live data
• Easy plug-in and scan operation
• Multi Lingual
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autel AutoLink AL529 OBDII Code Reader supports all 10 modes of OBDII test for complete vehicle diagnostics. The easy-to-use tool features a TFT color display and built-in speaker for visual and audible message cues and the patented One-Click I/M Readiness Key.
• AutoVIN function for quickly identifying manufacturer-specific codes
• Reads enhanced codes in Power-train system for Ford, for GM and for Chrysler
• Compatible with domestic, Asian and European vehicles, 1996 and newer
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Enhanced OBD II Mode 6 • Displays live O2 sensor test data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Views freeze frame data • Graphs data
• Reads live PCM data stream
• Reads, stores and plays back live sensor data
• Troubleshooter code tips aid technician in efficient vehicle diagnostics and vehicle repair
• Bright color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
• Multilingual (including English, Spanish and French) menu and DTC definitions
• Internet Updatable • Prints data via Windows PC
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autel AutoLink AL529HD not only supports OBD II Diagnostics for gasoline vehicles, but also supports two more protocols for high-duty vehicle: J1939 and J1708. When more than one vehicle control module is detected by the scan tool, you will be prompted to select the module with retrievable data. The Power train Control Module [PCM] and Transmission Control Module [TCM] are the most commonly scanned modules.
CAUTION: Don’t connect or disconnect the scan tool with the ignition is on or engine running.
Read Codes:
Stored Codes: are also known as “hard codes”, which are fault codes, or trouble codes that have been stored in the vehicle computer memory because the faults have reoccurred for more than a specified amount of key-cycles.
Pending Codes: are also referred to as “maturing codes” or “continuous monitor codes”. They indicate problems that the control module has detected during the current or last driving cycle but are not as yet considered serious.
Permanent Codes: are DTCs that are "confirmed" and are retained in the non-volatile memory of the vehicle’s computer until the appropriate monitor for each DTC has determined that the malfunction is no longer present and is not causing the MIL. Permanent DTCs are stored in nonvolatile memory and can not be erased by any diagnostics service or by disconnecting power to ECU.
NOTE：Permanent Codes function is available only for vehicles supporting the CAN protocols.
View Data and Freeze Frame Data: you can view live or real time PID data of vehicle’s computer module(s), and view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
Record Data: Allows recording vehicle modules’ Parameter Identification (PID) data to help diagnose intermittent vehicle problems. A recording includes 5 frames of live data before trigger event and several frames after trigger event. But for high-duty vehicles, only View Data is supported for now.
On-Board Monitor Test: It’s useful after servicing or after erasing a vehicle’s control module memory. The On-Board Monitor Test For non-CAN equipped vehicles and CAN-equipped vehicles retrieves and displays test results for power train components and systems that are not continuously monitored. The scan tool allows access to the results of on-board diagnostic monitoring tests for specific components/systems. The advanced feature enables you to read the definition of an On-Board Diagnostic Monitor ID.
NOTE: The scan tool will display a test definition if this definition is present in the vehicle’s computer memory. If no such definition is present, the scan tool will only display the Test IDs.
| Brand: | Autel |
|---|---|
| Isin: | IBDXBGDFKELO |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Autel AutoLink AL329, with its patented One-Click I/M Readiness Key, enables user to check State ёmission Monitor Status and verify repairs. Read and Erase codes on domestic, Asian and European vehicles, 1996 and newer.
• Compatible with domestic, Asian and European vehicles, 1996 and newer: work with all OBD II compliant vehicles, including those equipped with Control Area Network (CAN) protocol. The EPA requires all domestic, Asian and European vehicles, 1996 and newer (including light trucks), sold in the United States must be OBD II compliant.
• Auto VIN to quickly read & clear DTCs: VIN will be automatically displayed when manufacturer specific codes are read.
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Reads and displays I/M monitor (ёmissions) status
• Views Freeze Frame Data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Clears codes, resets monitors and turns off malfunction indicator light (MIL)
• Reset check engine light
• Graph, record and playback live data
• Easy plug-in and scan operation
• Multi Lingual
Autel AutoLink AL529 OBDII Code Reader supports all 10 modes of OBDII test for complete vehicle diagnostics. The easy-to-use tool features a TFT color display and built-in speaker for visual and audible message cues and the patented One-Click I/M Readiness Key.
• AutoVIN function for quickly identifying manufacturer-specific codes
• Reads enhanced codes in Power-train system for Ford, for GM and for Chrysler
• Compatible with domestic, Asian and European vehicles, 1996 and newer
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Enhanced OBD II Mode 6 • Displays live O2 sensor test data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Views freeze frame data • Graphs data
• Reads live PCM data stream
• Reads, stores and plays back live sensor data
• Troubleshooter code tips aid technician in efficient vehicle diagnostics and vehicle repair
• Bright color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
• Multilingual (including English, Spanish and French) menu and DTC definitions
• Internet Updatable • Prints data via Windows PC
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autel AutoLink AL529HD not only supports OBD II Diagnostics for gasoline vehicles, but also supports two more protocols for high-duty vehicle: J1939 and J1708. When more than one vehicle control module is detected by the scan tool, you will be prompted to select the module with retrievable data. The Power train Control Module [PCM] and Transmission Control Module [TCM] are the most commonly scanned modules.
CAUTION: Don’t connect or disconnect the scan tool with the ignition is on or engine running.
Read Codes:
Stored Codes: are also known as “hard codes”, which are fault codes, or trouble codes that have been stored in the vehicle computer memory because the faults have reoccurred for more than a specified amount of key-cycles.
Pending Codes: are also referred to as “maturing codes” or “continuous monitor codes”. They indicate problems that the control module has detected during the current or last driving cycle but are not as yet considered serious.
Permanent Codes: are DTCs that are "confirmed" and are retained in the non-volatile memory of the vehicle’s computer until the appropriate monitor for each DTC has determined that the malfunction is no longer present and is not causing the MIL. Permanent DTCs are stored in nonvolatile memory and can not be erased by any diagnostics service or by disconnecting power to ECU.
NOTE：Permanent Codes function is available only for vehicles supporting the CAN protocols.
View Data and Freeze Frame Data: you can view live or real time PID data of vehicle’s computer module(s), and view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
Record Data: Allows recording vehicle modules’ Parameter Identification (PID) data to help diagnose intermittent vehicle problems. A recording includes 5 frames of live data before trigger event and several frames after trigger event. But for high-duty vehicles, only View Data is supported for now.
On-Board Monitor Test: It’s useful after servicing or after erasing a vehicle’s control module memory. The On-Board Monitor Test For non-CAN equipped vehicles and CAN-equipped vehicles retrieves and displays test results for power train components and systems that are not continuously monitored. The scan tool allows access to the results of on-board diagnostic monitoring tests for specific components/systems. The advanced feature enables you to read the definition of an On-Board Diagnostic Monitor ID.
NOTE: The scan tool will display a test definition if this definition is present in the vehicle’s computer memory. If no such definition is present, the scan tool will only display the Test IDs.
• Compatible with domestic, Asian and European vehicles, 1996 and newer: work with all OBD II compliant vehicles, including those equipped with Control Area Network (CAN) protocol. The EPA requires all domestic, Asian and European vehicles, 1996 and newer (including light trucks), sold in the United States must be OBD II compliant.
• Auto VIN to quickly read & clear DTCs: VIN will be automatically displayed when manufacturer specific codes are read.
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Reads and displays I/M monitor (ёmissions) status
• Views Freeze Frame Data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Clears codes, resets monitors and turns off malfunction indicator light (MIL)
• Reset check engine light
• Graph, record and playback live data
• Easy plug-in and scan operation
• Multi Lingual
Autel AutoLink AL529 OBDII Code Reader supports all 10 modes of OBDII test for complete vehicle diagnostics. The easy-to-use tool features a TFT color display and built-in speaker for visual and audible message cues and the patented One-Click I/M Readiness Key.
• AutoVIN function for quickly identifying manufacturer-specific codes
• Reads enhanced codes in Power-train system for Ford, for GM and for Chrysler
• Compatible with domestic, Asian and European vehicles, 1996 and newer
• Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) and pending codes
• Enhanced OBD II Mode 6 • Displays live O2 sensor test data
• Retrieves vehicle identification information (VIN, CALID and CVN)
• Views freeze frame data • Graphs data
• Reads live PCM data stream
• Reads, stores and plays back live sensor data
• Troubleshooter code tips aid technician in efficient vehicle diagnostics and vehicle repair
• Bright color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
• Multilingual (including English, Spanish and French) menu and DTC definitions
• Internet Updatable • Prints data via Windows PC
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autel AutoLink AL529HD not only supports OBD II Diagnostics for gasoline vehicles, but also supports two more protocols for high-duty vehicle: J1939 and J1708. When more than one vehicle control module is detected by the scan tool, you will be prompted to select the module with retrievable data. The Power train Control Module [PCM] and Transmission Control Module [TCM] are the most commonly scanned modules.
CAUTION: Don’t connect or disconnect the scan tool with the ignition is on or engine running.
Read Codes:
Stored Codes: are also known as “hard codes”, which are fault codes, or trouble codes that have been stored in the vehicle computer memory because the faults have reoccurred for more than a specified amount of key-cycles.
Pending Codes: are also referred to as “maturing codes” or “continuous monitor codes”. They indicate problems that the control module has detected during the current or last driving cycle but are not as yet considered serious.
Permanent Codes: are DTCs that are "confirmed" and are retained in the non-volatile memory of the vehicle’s computer until the appropriate monitor for each DTC has determined that the malfunction is no longer present and is not causing the MIL. Permanent DTCs are stored in nonvolatile memory and can not be erased by any diagnostics service or by disconnecting power to ECU.
NOTE：Permanent Codes function is available only for vehicles supporting the CAN protocols.
View Data and Freeze Frame Data: you can view live or real time PID data of vehicle’s computer module(s), and view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
Record Data: Allows recording vehicle modules’ Parameter Identification (PID) data to help diagnose intermittent vehicle problems. A recording includes 5 frames of live data before trigger event and several frames after trigger event. But for high-duty vehicles, only View Data is supported for now.
On-Board Monitor Test: It’s useful after servicing or after erasing a vehicle’s control module memory. The On-Board Monitor Test For non-CAN equipped vehicles and CAN-equipped vehicles retrieves and displays test results for power train components and systems that are not continuously monitored. The scan tool allows access to the results of on-board diagnostic monitoring tests for specific components/systems. The advanced feature enables you to read the definition of an On-Board Diagnostic Monitor ID.
NOTE: The scan tool will display a test definition if this definition is present in the vehicle’s computer memory. If no such definition is present, the scan tool will only display the Test IDs.
- Brand: Autel
- Manufacturer Part Number: Autel
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.