Veiculos 92600JA00A Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C 6512503
Veiculos 92600JA00A Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C 6512503
Veiculos 92600JA00A Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C 6512503
SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING
Store Categories
- Other
- Others
- Engine Parts
- Camshafts
- Pistons, Rings, Rods & Parts
- Power Steering Pump
- Water Pumps
- Ignition Systems
- Engine Rebuild
- Turbos
- Side mirror
- Automatic Transmission
- Engine Overhaul kit
- Timing Kits
- Sensors
- Switches & Controls
- Air & Fuel Delivery
- Carburetors
- Starter
- A/C Compressors & Clutches
- Driveshafts
- A/C Condensers
- Engine Mounts
- Throttle Body
- Lift Kits
- Steering & Suspension
- Headlight Assemblies
- Alternator
- Brake Parts
- Emission Control System
- Radiator systems
- Intercooler systems
92600JA00A Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C 6512503
Product Description
Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C
Specifications:
Material: Aluminum Alloy
Color: Silver Black
Placement on Vehicle: Front
Quantity: 1
Pulley Groove Quantity：6
Voltage: 12V
Compressor Type: Belt Driven
Fitment Type: Direct Replacement
Package Size: 26.5x19x23.5cm
Package Weight: 7.8kg
Part Number:
CO 10886C,68664, 98664, 6512503 92600JA00A, 92600ZN40B
Interchange Part Numbers: CO 10886C
Fitment:
For 2007-2012 Nissan Altima 2.5L l4
Package Include:
1pc Air Conditioning Compressor
Features:
1. Built to strict quality control standards 100% factory tested
2. Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
3. Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.
4. Perfect match for the original car.
5. Protection against vibration and light side forces.
6. Great life cycles.
7. Guaranteed Exact Fit for easy installation.
Attention:
1. Please confirm compatibility before purchasing to ensure correct fitment.
2. Please ensure the installation site is clean otherwise it will lead to the high temperature of the compressor and the melt of the clutch.
3. Noise, vibration, durability, vacuum decay, and pressure decay need to be tested to ensure no leaks and keep longer life of the compressor.
4. It is strongly recommended to conduct professional maintenance and installation.
Note:
The compressor you are ready to replace has failed for some reason, and it is important that you find out the cause of the compressor failure before installing our compressor, a step that allow you to avoid the pain of multiple replacement. 80% of the compressor fail because of a lack of lubricating oil or because of the blockage of the system. Remember, 60% of the oil in the refrigeration system should be in the compressor. So, if the total amount of oil in the system is 200 ML (6.76oz) then the compressor should have 130ML (4.39oz) of oil. Because the refrigerants are circulating in the system with oil, and finally they flow back to the compressor. If the reason for the failure of the original compressor is that there is not oil or there is not enough oil, then the system has a leakage of refrigerant or a place to block, preventing the lubricating oil from flowing back to the compressor. The residue and blockage in the system prevent the normal oil from flowing back to the compressor during the day. If you don’t fix the leak and blockage, this compressor will also fail.
Confirm the correct amount of refrigerants on board according to the requirements of OEM. If the refrigerating capacity of the car is insufficient, the amount of refrigerants should be increased. Refer specifically to OEM instructions.
After the old compressor is taken down, drain out the oil in it. In this way, turn the compressor upside down and shake the position above the middle of the compressor to pour out the oil. Pour the used oil into a clean cup to see if there is any residue and stains in it. Both variable and compressors have an oil plug that should be removed before pouring oil.
If the oil poured out of the old compressor is a thousand clean and has 60% or more of the OEM requirements, flush out remaining oil in the system. At this time, it is necessary to determine why the original compressor failed.
*Did the clutch burn out?
*Is the voltage output from the system to the clutch correctly?
*Is the shaft seal of the compressor or gasket of the cylinder block leaking?
If it is one of the above problems, then it is the compressor problem. If the condenser fan fails, it will cause the air flow to reach the condenser to weaken, so that the refrigeration system does not get the required heat.
If there is not oil or not enough oil in the compressor, there may be a freon leak in the system, find the leaked part, fix it or replace it, and do not use sealant in the system.
Before installing the compressor make sure that the system has the recommended amount of oil too. If the compressor has the amount of oil required but the system doesn’t have enough this will lead to compressor failure any way
It takes at least 45 min to clean the system, a process that removes residual solvents and moisture.
Welcome to our eBay store!
Your one stop parts shop stockists of quality branded parts for your car.
We are a company completely dedicated to providing high quality improved design vehicle components.
Spare parts available for most models! We pride ourselves on supplying the part you need at affordable prices.
Our customer service team are second to none.
Please check out our items listed and do not hesitate to call us with any queries you may have.
We will be pleased to help in any way we can!
1.We accept PayPal, VISA, MasterCard, Debit Card through PayPal.
2. Import duties, taxes and customs clearance fees are not included in the item price or shipping charges.
These charges are the buyer’s responsibility.
1.For inventory items in the United States, your order is usually shipped within 1-2 days.
2.For products in stock in China：
Economy Shipping(Post/Airmail/DHL e-commerce): To USA 7-12 Working days , To other countries 20-50 Working days；
Expedited Shipping(FedEx/DHL/TNT/UPS): To USA 3-6 Working days ,To other countries 3-8 Working days.
3.Please make sure to provide us with correct , precise and detailed shipping address(home or office address) ,
correct phone number and full name.But not a postal mailbox/APO/FPO address .
4.If you don't receive package over 30 working days , please contact us via eBay message.
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
3. We will not accept responsibility for loss or damage of goods during transit,
please ensure that the insurance cover option is taken where possible.
4. Upon receipt, all products will be inspected at our discretion in 3-7 business days.
Then, the updated result will be informed.
1.Warranty against manufacture defect.
2.Replace/return are available if buyers receive wrong/damaged/defective items.
3.For replacement or return , buyer should keep the item in acceptable packing.
4.Before replace or return ,buyer should submit proof to us by pics if possible.
5.Anyway ,by nice communications ,we can find a way to make you satisfied
Copyright © 2022 Tongtool
| Brand: | Veiculos |
|---|---|
| Isin: | ILFFXKJO1QDI |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING
Store Categories
- Other
- Others
- Engine Parts
- Camshafts
- Pistons, Rings, Rods & Parts
- Power Steering Pump
- Water Pumps
- Ignition Systems
- Engine Rebuild
- Turbos
- Side mirror
- Automatic Transmission
- Engine Overhaul kit
- Timing Kits
- Sensors
- Switches & Controls
- Air & Fuel Delivery
- Carburetors
- Starter
- A/C Compressors & Clutches
- Driveshafts
- A/C Condensers
- Engine Mounts
- Throttle Body
- Lift Kits
- Steering & Suspension
- Headlight Assemblies
- Alternator
- Brake Parts
- Emission Control System
- Radiator systems
- Intercooler systems
92600JA00A Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C 6512503
Product Description
Air Compressor For 2007-2012 Nissan Altima 2.5L l4 CO 10886C
Specifications:
Material: Aluminum Alloy
Color: Silver Black
Placement on Vehicle: Front
Quantity: 1
Pulley Groove Quantity：6
Voltage: 12V
Compressor Type: Belt Driven
Fitment Type: Direct Replacement
Package Size: 26.5x19x23.5cm
Package Weight: 7.8kg
Part Number:
CO 10886C,68664, 98664, 6512503 92600JA00A, 92600ZN40B
Interchange Part Numbers: CO 10886C
Fitment:
For 2007-2012 Nissan Altima 2.5L l4
Package Include:
1pc Air Conditioning Compressor
Features:
1. Built to strict quality control standards 100% factory tested
2. Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
3. Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.
4. Perfect match for the original car.
5. Protection against vibration and light side forces.
6. Great life cycles.
7. Guaranteed Exact Fit for easy installation.
Attention:
1. Please confirm compatibility before purchasing to ensure correct fitment.
2. Please ensure the installation site is clean otherwise it will lead to the high temperature of the compressor and the melt of the clutch.
3. Noise, vibration, durability, vacuum decay, and pressure decay need to be tested to ensure no leaks and keep longer life of the compressor.
4. It is strongly recommended to conduct professional maintenance and installation.
Note:
The compressor you are ready to replace has failed for some reason, and it is important that you find out the cause of the compressor failure before installing our compressor, a step that allow you to avoid the pain of multiple replacement. 80% of the compressor fail because of a lack of lubricating oil or because of the blockage of the system. Remember, 60% of the oil in the refrigeration system should be in the compressor. So, if the total amount of oil in the system is 200 ML (6.76oz) then the compressor should have 130ML (4.39oz) of oil. Because the refrigerants are circulating in the system with oil, and finally they flow back to the compressor. If the reason for the failure of the original compressor is that there is not oil or there is not enough oil, then the system has a leakage of refrigerant or a place to block, preventing the lubricating oil from flowing back to the compressor. The residue and blockage in the system prevent the normal oil from flowing back to the compressor during the day. If you don’t fix the leak and blockage, this compressor will also fail.
Confirm the correct amount of refrigerants on board according to the requirements of OEM. If the refrigerating capacity of the car is insufficient, the amount of refrigerants should be increased. Refer specifically to OEM instructions.
After the old compressor is taken down, drain out the oil in it. In this way, turn the compressor upside down and shake the position above the middle of the compressor to pour out the oil. Pour the used oil into a clean cup to see if there is any residue and stains in it. Both variable and compressors have an oil plug that should be removed before pouring oil.
If the oil poured out of the old compressor is a thousand clean and has 60% or more of the OEM requirements, flush out remaining oil in the system. At this time, it is necessary to determine why the original compressor failed.
*Did the clutch burn out?
*Is the voltage output from the system to the clutch correctly?
*Is the shaft seal of the compressor or gasket of the cylinder block leaking?
If it is one of the above problems, then it is the compressor problem. If the condenser fan fails, it will cause the air flow to reach the condenser to weaken, so that the refrigeration system does not get the required heat.
If there is not oil or not enough oil in the compressor, there may be a freon leak in the system, find the leaked part, fix it or replace it, and do not use sealant in the system.
Before installing the compressor make sure that the system has the recommended amount of oil too. If the compressor has the amount of oil required but the system doesn’t have enough this will lead to compressor failure any way
It takes at least 45 min to clean the system, a process that removes residual solvents and moisture.
Welcome to our eBay store!
Your one stop parts shop stockists of quality branded parts for your car.
We are a company completely dedicated to providing high quality improved design vehicle components.
Spare parts available for most models! We pride ourselves on supplying the part you need at affordable prices.
Our customer service team are second to none.
Please check out our items listed and do not hesitate to call us with any queries you may have.
We will be pleased to help in any way we can!
1.We accept PayPal, VISA, MasterCard, Debit Card through PayPal.
2. Import duties, taxes and customs clearance fees are not included in the item price or shipping charges.
These charges are the buyer’s responsibility.
1.For inventory items in the United States, your order is usually shipped within 1-2 days.
2.For products in stock in China：
Economy Shipping(Post/Airmail/DHL e-commerce): To USA 7-12 Working days , To other countries 20-50 Working days；
Expedited Shipping(FedEx/DHL/TNT/UPS): To USA 3-6 Working days ,To other countries 3-8 Working days.
3.Please make sure to provide us with correct , precise and detailed shipping address(home or office address) ,
correct phone number and full name.But not a postal mailbox/APO/FPO address .
4.If you don't receive package over 30 working days , please contact us via eBay message.
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
3. We will not accept responsibility for loss or damage of goods during transit,
please ensure that the insurance cover option is taken where possible.
4. Upon receipt, all products will be inspected at our discretion in 3-7 business days.
Then, the updated result will be informed.
1.Warranty against manufacture defect.
2.Replace/return are available if buyers receive wrong/damaged/defective items.
3.For replacement or return , buyer should keep the item in acceptable packing.
4.Before replace or return ,buyer should submit proof to us by pics if possible.
5.Anyway ,by nice communications ,we can find a way to make you satisfied
Copyright © 2022 Tongtool
- Brand: Veiculos
- Compressor Drive Type: Belt Driven
- Country/Region of Manufacture: China
- Interchange Part Number: 6512503 92600JA00A, 68664, 92600ZN40B, 98664, CO 10886C
- Manufacturer Part Number: QMP-I01D0017
- Manufacturer Warranty: 3 month
- Material: Aluminum Alloy
- OE/OEM Part Number: 6512503 92600JA00A, 92600ZN40B, 98664, 68664, CO 10886C
- Pulley Groove Quantity: 6
- Size Type: 26.5*19*23.5
- Superseded Part Number: CO 10886C
- Type: A/C Compressor
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.