I.Application： Applicable to automobiles, garage doors, doors, skylights, car/motorcycle alarms, home safety products, short-distance wireless remote control products, electrical appliances/home automation lamps, industrial control products, etc. There are 4 buttons one each of the remote control key fobs, which can help you control the devices precisely. The 433.92mhz fixed frequency remote cloner for copying 99.99% common fixed and learning code remote controls. 2.Overview Frequency RF 433.92MHZ Wireless remote control is not a universal remote control, you need to meet the following three conditions, you can easily and quickly generate another new remote control with the same function. Condition 1, the original remote control is able to be used normally Condition 2, clear the original remote control transmitter frequency Condition 3， The coding chip of the original remote control is clear (see the following list for commonly used coding chips). Condition 4, if there is no word on the remote control chip, check the foreign non-standard code remote control brands and pictures that can be copied. 3.The common coding chips for the original remote control that can be copied are as follows: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, SMC5326 (all manufacturers), SC5262, HT12E, HT12D, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, SM5028S, series, 527 (all vendors), 1527 (all vendors), 2240 (all vendors) and foreign non-standard codes, see the list for detailed brands. 4.How to identify the transmit frequency and coding chip of the remote control After disassembling the shell of the remote control, as shown in the picture below (each remote control motherboard has a silver-white sound table with round, rectangular, square, etc. Above it, there is a transmitter frequency of the remote control is written. Each remote control has a black chip on the top of the chip, the chip has written clearly the model number of the encoding chip.) 5.Technical Parameters 1, this product can copy the original remote control IC models 2262 2260 1527 2240 HT6012B HT6012D SMC5326 and other compatible IC and many domestic and foreign non-standard code and scrolling code. 2、No need to consider the oscillation resistor and address code, this product will be automatically compatible with the oscillation resistor and address code. 3、This product is not a universal remote control, can only copy the chip and brand remote control supported by the remote control. 4、This product uses 12V or 3V/CR2032 battery power supply, when the remote control distance is insufficient, please replace the battery. 5, the remote control is a fixed frequency, commonly used for 315MHz; 433MHz, can be customized for other frequencies. 6. Scope of application (1) Rolling door, rolling window controller; (2) Road gate, telescopic door controller; (3) Bus door control system; (4) Remote control system; (5) Intelligent home system; (6) Remote control door opener; (7) Wireless security alarms; (8) Remote control curtain machine; (9) Wireless industrial controller; (10) RGB strip light, strip light, lighting fixture control; 7. the method of copying Step 1, zero operation At the same time, press and hold the remote control above the two keys do not let go (is the remote control of the A key and B key or lock and unlock symbol button, etc.), the LED indicator flashes three times, release any one of the keys pressed down, the other does not let go, click on the button released three times, the LED indicator into a fast flashing state, at this time all the data in the memory is cleared, clear the data after the remote control, no matter which button, the LED indicator is not lit. The LED indicator will not light up no matter which key is pressed after the data is cleared. Step 2, copy: A handheld original remote control, another handheld copy remote control, the two remotes as close as possible, (the ideal is the two remotes zero distance side by side on the desktop), respectively, press the key required copy, the LED indicator flashes fast two times, then followed by a slow flash 3 times the last light, the copy is successful, the other keys operate in the same way. Some remote control transmitter power is small, should be equipped with the original remote control and copy remote control back-to-back operation, in order to copy. Some of the operating environment has interference, should avoid interference operation, If the copy is not very good, after clearing the code to re-copy. Tips for use: If you accidentally zeroed out the code of the copy remote control, and you want to recover it, press the two keys at the same time and don't let go, see the LED light keep flashing that the recovery has been successful. The original deleted data will be restored. How to identify the transmit frequency and coding chip of the remote control After disassembling the shell of the remote control, as shown in the picture below (each remote control motherboard has a silver-white sound table with round, rectangular, square, etc. Above it, there is a transmitter frequency of the remote control is written. Each remote control has a black chip on the top of the chip, the chip has written clearly the model number of the encoding chip.) 4-button programmable gate/garage control for car alarms, automatic gates, rolling doors, etc. Some compatible models: PPA / SEG / RCG / UNISEG / PROTER / INTELBRAS / GAREN / UNISYSTEM / ETC / SULTON / COMPATEC / JFL / OMEGA SAT / NBM / CLICK / IPEC / HOMBRUS / PISITRON CODE LEARNING Compatible chip types: 2260 (pt2260, sc2260, lx2260, hx2260); 2262,(pt2262, sc2262, lx2262, hx2262, hx2262), pt2264, pt2240 (lx2240),1527 (ev1527, hs1527, fp), fp527, fp, sm, smc926, ax5026, AX5326-3,AX5326-4, ht600, ht680, ht6207, ht6010, ht6012, ht6013, ht6014, ht12d, pic16f629, pic16f630 NOTE: Cannot program rolling code systems (Rossi, Linear and Peccinin). ______________________________________________________________________ Main questions: 1- Is the product ready for delivery? A: Yes, all our products are ready for delivery and are already in Brazil. 2- Original product? A: Yes, all our products are original and sealed. 3- Does the controller come with a battery? A: Yes, all the controllers in the ad come with a battery. Didn't find the answer to your question? Send us a private message and we'll be happy to help.