SKYSEA Dental Dentist LED Curing Light Cure Lamp Wireless Resin Woodpecker Style
SKYSEA Dental Dentist LED Curing Light Cure Lamp Wireless Resin Woodpecker Style
SKYSEA Dental Dentist LED Curing Light Cure Lamp Wireless Resin Woodpecker Style
Name: Dental LED Curing Equipment
Battery (rechargeable use): Lithium ion battery
Battery capacity: 1600mAh
Battery voltage: 3.7V
Weight: about 400g with packaging
Applicable temperature/humidity: 5°C~40°C/≤80%
Packing specification: 300x150x60 mm
Curing time:3s,5s,10s,15s,20s
Charger input voltage: 100V-240VAC, 50-60HZ
Output voltage: host dc 5v/1A
LED light wavelength: 458.5nm
Atmospheric pressure: 50kPa〜106kPa
Light Intensity
P1 Highlight Mode 1800-2200mw/cm2
P2 Standard Model 1000-1300mw/cm2
Note:
The time required for resin curing mainly depends on the resin brand, curing depth and area, etc., 3 seconds is a reference value, not an absolute value, respectfully.
Operation method:
1 Lightly press the "M" mode setting button of the main unit, you can select any of the following two modes to enter the working state:
(1) P1 high light intensity mode: 1800-2200mw/cm2
(2) P2 standard mode: 1000-1300mw/cm2
After selection, the display shows the corresponding characters (P1/P2).
2 Tap the "T" time setting button of the host to set the light curing time:
(1) P1 mode can choose 3 or 5 seconds timing time
(2) P2 mode can choose the timing time of 10, 15, 20 seconds
3. When in use, put the disposable film cover on the head of the main unit, then aim the light source at the position to be cured, press the "" on/off key, the main unit will emit a beep, the main unit will emit blue light and press the selected Working in working mode, the display screen starts to display the countdown time from the selected timing time, and ends at 0 o'clock, and the display screen returns to display the original set timing time.
4. During the work process, you can press the " on/off
"to end the work at any time, and the display will return to the original set timing time.
5. After one irradiation cycle is over, you can immediately press the "on/off" key to start the next cycle. If it is obvious that the handle starts to get hot, stop working until the handle is completely cooled down before starting to work. In P2 mode, it is recommended that the continuous irradiation time does not exceed 120S.
6. Low-voltage indication: The host has a low-battery detection function. When a low battery is detected, the display flashes. Please charge it in time.
7. Connect the power adapter (optional) to the 100V-240V network power when charging, and insert the output end of the adapter into the charging port at the bottom of the host, and the display scrolls.
8. After use, please remove the disposable film cover from the head of the main unit and throw it into the trash can. Repeated use is prohibited. If the lens is stained with resin, please wipe it clean with cotton cloth to avoid affecting the light intensity.
9. The machine will automatically shut down after 2 minutes of inactivity, please press any key to turn it on.
Use and safety precautions:
1. When using the machine for the first time, please charge it for at least 4 hours. The display scrolls when the battery is charging, and the display stops scrolling when it is fully charged. At this time, you can pull out the plug of the power adapter. Long-term charging is prohibited.
2. When in use, a disposable film cover should be inserted and repeated use is prohibited to prevent cross-infection.
3. In clinical use, the light source should be directly irradiated on the cured resin material to prevent improper irradiation position and affect the curing effect.
4. The original shading plate must be used to effectively prevent blue light from damaging the eyes. Blue light is strictly forbidden to irradiate the eyes.
5. Please use the original power adapter, other power adapters may cause damage to the lithium battery and control circuit.
Features for Dental LED Curing Lamp
1. Wireless
2. USB
3. TWO working models: P1 Highlight Mode,P2 Standard Model
4. Time setting: P1:3, 5, P2:10, 15, 20s
5. Large capacity battery, A full charge can be used for more than 500times
| Brand: | SKYSEA |
|---|---|
| Isin: | IJ2OUKLYWPUA |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Name: Dental LED Curing Equipment
Battery (rechargeable use): Lithium ion battery
Battery capacity: 1600mAh
Battery voltage: 3.7V
Weight: about 400g with packaging
Applicable temperature/humidity: 5°C~40°C/≤80%
Packing specification: 300x150x60 mm
Curing time:3s,5s,10s,15s,20s
Charger input voltage: 100V-240VAC, 50-60HZ
Output voltage: host dc 5v/1A
LED light wavelength: 458.5nm
Atmospheric pressure: 50kPa〜106kPa
Light Intensity
P1 Highlight Mode 1800-2200mw/cm2
P2 Standard Model 1000-1300mw/cm2
Note:
The time required for resin curing mainly depends on the resin brand, curing depth and area, etc., 3 seconds is a reference value, not an absolute value, respectfully.
Operation method:
1 Lightly press the "M" mode setting button of the main unit, you can select any of the following two modes to enter the working state:
(1) P1 high light intensity mode: 1800-2200mw/cm2
(2) P2 standard mode: 1000-1300mw/cm2
After selection, the display shows the corresponding characters (P1/P2).
2 Tap the "T" time setting button of the host to set the light curing time:
(1) P1 mode can choose 3 or 5 seconds timing time
(2) P2 mode can choose the timing time of 10, 15, 20 seconds
3. When in use, put the disposable film cover on the head of the main unit, then aim the light source at the position to be cured, press the "" on/off key, the main unit will emit a beep, the main unit will emit blue light and press the selected Working in working mode, the display screen starts to display the countdown time from the selected timing time, and ends at 0 o'clock, and the display screen returns to display the original set timing time.
4. During the work process, you can press the " on/off
"to end the work at any time, and the display will return to the original set timing time.
5. After one irradiation cycle is over, you can immediately press the "on/off" key to start the next cycle. If it is obvious that the handle starts to get hot, stop working until the handle is completely cooled down before starting to work. In P2 mode, it is recommended that the continuous irradiation time does not exceed 120S.
6. Low-voltage indication: The host has a low-battery detection function. When a low battery is detected, the display flashes. Please charge it in time.
7. Connect the power adapter (optional) to the 100V-240V network power when charging, and insert the output end of the adapter into the charging port at the bottom of the host, and the display scrolls.
8. After use, please remove the disposable film cover from the head of the main unit and throw it into the trash can. Repeated use is prohibited. If the lens is stained with resin, please wipe it clean with cotton cloth to avoid affecting the light intensity.
9. The machine will automatically shut down after 2 minutes of inactivity, please press any key to turn it on.
Use and safety precautions:
1. When using the machine for the first time, please charge it for at least 4 hours. The display scrolls when the battery is charging, and the display stops scrolling when it is fully charged. At this time, you can pull out the plug of the power adapter. Long-term charging is prohibited.
2. When in use, a disposable film cover should be inserted and repeated use is prohibited to prevent cross-infection.
3. In clinical use, the light source should be directly irradiated on the cured resin material to prevent improper irradiation position and affect the curing effect.
4. The original shading plate must be used to effectively prevent blue light from damaging the eyes. Blue light is strictly forbidden to irradiate the eyes.
5. Please use the original power adapter, other power adapters may cause damage to the lithium battery and control circuit.
Features for Dental LED Curing Lamp
1. Wireless
2. USB
3. TWO working models: P1 Highlight Mode,P2 Standard Model
4. Time setting: P1:3, 5, P2:10, 15, 20s
5. Large capacity battery, A full charge can be used for more than 500times
Item Specifics
- Product Code: EBZ
- Battery voltage and capacity: 4.2V/2000mAh
- Power supply: Rechargeable Lithium battery, NO Charger pedestal
- Light intensity: 1400MW/CM2
- Featured Refinements: Dental LED Curing Light
- power: 5W
- Regulation Number: 21 CFR 872.6070
- Power input: AC100V-240V
- Protection against electrical shock: type B
- relative humidity: ≤80%
- environment temperature: 5℃ to 40℃
- 510(K) Number: K192233
- Located in: Beijing, China
- Input of adapter: 100V to 240V~50Hz/60Hz
- Type: Curing light
- Consumption power: ≤8W
- protection type: Class Ⅱ
- Four modes of working time: 10,20,30,40 seconds
- wave length: 420nm-480nm
- Subsequent Product Code: EBZ
- Working modes: Full power
- Chuck Type: Autochuck
- Brand: SKYSEA
- Light Type: LED
- Intended Use/Discipline: Dental Laboratory, Dentistry
- Model: LED-B
- MPN: Does Not Apply
- Country/Region of Manufacture: China
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.