Skip to main content

Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

Brand: Scitoo
next product image
previous product image
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For
Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For

Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

Brand: Scitoo
  • How to choose correct wheel spacers/ adapters?
  •  
  • 1. Check Your Vehicle/ Wheel Bolt Pattern/ PCD - 5x100mm
  •  
  • The bolt pattern of a wheel is the layout of the mounting holes. A wheel's bolt pattern can also be called its "Bolt Circle" or "Pitch Circle Diameter (PCD)".
  • Bolt pattern is expressed as the number of lugs by the diameter of the imaginary circle formed by the center of the lugs. For example, 5 x 4.5 in., or 4 x 100mm.
  • The bolt pattern MUST match the pattern on the axle hub. Even a slight difference will cause the wheel to be off-center. This will cause excessive vibration while driving.
  • 2. Check Vehicle Hub Bore Size - 54.1mm
    		•



    2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

    How to choose correct wheel spacers/ adapters?

     

    1. Check Your Vehicle/ Wheel Bolt Pattern/ PCD - 5x100mm

     

    The bolt pattern of a wheel is the layout of the mounting holes. A wheel's bolt pattern can also be called its "Bolt Circle" or "Pitch Circle Diameter (PCD)".

    Bolt pattern is expressed as the number of lugs by the diameter of the imaginary circle formed by the center of the lugs. For example, 5 x 4.5 in., or 4 x 100mm.

    The bolt pattern MUST match the pattern on the axle hub. Even a slight difference will cause the wheel to be off-center. This will cause excessive vibration while driving.

    2. Check Vehicle Hub Bore Size - 54.1mm

     

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

     

    3. Check Vehicle Thread Pitch - M12X1.5

     

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    4. Measure the fender gap to choose suitable thickness. - 20mm

     

    The thickness of spacer you need will vary depending on the individual vehicles you’ve performed, determining that correct thickness is extremely important.
    Measuring the wheel gap is the most basic beginning. The wheel gap is the amount of space between the inner fender lip and the outside edge of your wheel tires or rims.

     

    1. Preparing two rulers, take one ruler in each hand, set one flat against the inner fender lip hanging down as straight as possible. Measure the distance from the tire or rim edge to the hanging ruler. This distance is the amount of room you have till you would have contact. You will want to get a spacer smaller than this number.
    2. If you have a straight edge metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size spacer you will need to achieve the look that flushes or nearly flushes with the fender.

     

    Every car’s wheel gap is various, even if they the same exact cars, the wheel gap of the front wheel and the rear wheel is different. Always measure first before buying wheel spacers. Too thin, you will still have wheel/caliper interference. Too thick, the wheel rims or tires will hit the fenders. The proper thickness will give you the brake clearance and wheel offset you need while avoiding fender rub as well as breaking local laws and regulations.

     

    Vehicle Fitment Information as Follow

     

    For Lexus:

    For Lexus CT200h 2011-2017

    For Lexus ES250 1990-1991

     

    For Pontiac:

    For Pontiac Vibe 2003-2008

     

    For Scion:

    For Scion tC 2005-2010    

    For Scion xD 2009-2014

     

    For Toyota :

    For Toyota Camry 1986-1991           

    For Toyota Celica 1993-2005 5 Lug Only       

    For Toyota Corolla 2003-2023          

    For Toyota Matrix 2003-2013          

    For Toyota Prius 2004-2022

     

    The main reason for vibration from wheel spacers

     

    In fact ,wheel spacers in themselves don’t cause vibration,they are just increasing the cars sensitivity to a pre-existing problem.Wheel spacers could be magnifying an existing imbalance or out-of-round condition in tires. Also, this may be incompatible with the natural frequency of the front control arm bushings. Most likely, though, is an amplified pre-existing problem.Anyway,a few causes lead to vibration.


    1.Sometimes wheel weights get knocked off or lost when pulling wheels on/off the car.
    2.If the wheels were out of balance, the spacers would magnify the effect.
    3.Its possible that the wheels didn't seat correctly on the hubs. Lowering the car more than was necessary to keep the wheel from turning.

     

    How to fix the problem ?

     

    1. Firstly, getting rid of the problem of wheel spacers themselves and making sure everything was mating up correctly.

    For example,wheel bore should match the hub.When the wheel is in the air, give it a spin and check for any misalignment/wobble/etc.Both the face of the wheel hub and the back of the wheel spacers are clean,no rust or corrosion. Maybe it is just a small burr on one surface.Make sure wheel bolts are long enough and are torqued and retorqued after a few miles.After check it,pls try to remove them and re-install.

    2. Rebalance or correct an out of round condition of your tires

    Following the above step,removed everything, cleaned/inspected for any small dents/gashes in the wheels/hubs/spacers, put everything back together and torqued the bolts in a star pattern with only a bit of weight on the wheels but it’s still vibrating.Then it’s certainly the vibration wasn’t caused by wheel spacers but there is an existing imbalance or out of round in a tire of your car.Then you need to go for a rebalance.Finding a technician that actually understands how the tire balance works. Most better shops can handle this. Just go in and ask if the technician knows how to overide the automatic zero or whatever its called. Expect to pay extra for the additional time it will take.If the tire may be out of round, in which case a small amount of shaving will be necessary. If you find a shop that can correct an out of round condition, we’ll assume they also understand balancing to less than 1/8 oz.And the problem is now almost gone.

    3. Very smooth roads don't cause any vibration.

    After rebalance or correct an out of round condition of your tires,any vibration left its entirely road induced.Very smooth roads don't cause any vibration.


    Item Specifics
    Manufacturer Part Number :SCI128881TOO
    Brand :Scitoo
    Vehicle Bolt Pattern :5x100mm
    Wheel Bolt Pattern :5x100mm
    Hub Bore :54.1mm
    Centric :Hub and Wheel Centric (W/Lip)
    Spacer Thickness :20mm
    Thread Size :12X1.5 or 12mmX1.5 or M12X1.5
    Type :Wheel Spacers
    Number of Pieces :2
    Color :Black
    Items Included :2 pcs Wheel Spacers
    Placement on Vehicle :Front,Rear,Left,Right
    Features :Easy Installation
    Material :Aluminum
    Universal Fitment :No
    Bolt Pattern :5x100mm
    Torqued Down By Hand At :70-80 FT/LBS
    Interchange Part Number :For Toyota Fits Lexus 5x100mm PCD-M12x1.5
    OE/OEM Part Number :5x100mm-M12x1.5-20mm-Black-Wheel Spacers
    Bolt Shank Length :26 mm

    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    Payment

    [We only accept payment through PayPal. You can open a Paypal account at]

    Returns

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]

    Customer Services

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Feedback

    1. We will leave a feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.

    Shop Category
    Picture
    2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

    How to choose correct wheel spacers/ adapters?

     

    1. Check Your Vehicle/ Wheel Bolt Pattern/ PCD - 5x100mm

     

    The bolt pattern of a wheel is the layout of the mounting holes. A wheel's bolt pattern can also be called its "Bolt Circle" or "Pitch Circle Diameter (PCD)".

    Bolt pattern is expressed as the number of lugs by the diameter of the imaginary circle formed by the center of the lugs. For example, 5 x 4.5 in., or 4 x 100mm.

    The bolt pattern MUST match the pattern on the axle hub. Even a slight difference will cause the wheel to be off-center. This will cause excessive vibration while driving.

    2. Check Vehicle Hub Bore Size - 54.1mm

     

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

     

    3. Check Vehicle Thread Pitch - M12X1.5

     

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    4. Measure the fender gap to choose suitable thickness. - 20mm

     

    The thickness of spacer you need will vary depending on the individual vehicles you’ve performed, determining that correct thickness is extremely important.
    Measuring the wheel gap is the most basic beginning. The wheel gap is the amount of space between the inner fender lip and the outside edge of your wheel tires or rims.

     

    1. Preparing two rulers, take one ruler in each hand, set one flat against the inner fender lip hanging down as straight as possible. Measure the distance from the tire or rim edge to the hanging ruler. This distance is the amount of room you have till you would have contact. You will want to get a spacer smaller than this number.
    2. If you have a straight edge metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size spacer you will need to achieve the look that flushes or nearly flushes with the fender.

     

    Every car’s wheel gap is various, even if they the same exact cars, the wheel gap of the front wheel and the rear wheel is different. Always measure first before buying wheel spacers. Too thin, you will still have wheel/caliper interference. Too thick, the wheel rims or tires will hit the fenders. The proper thickness will give you the brake clearance and wheel offset you need while avoiding fender rub as well as breaking local laws and regulations.

     

    Vehicle Fitment Information as Follow

     

    For Lexus:

    For Lexus CT200h 2011-2017

    For Lexus ES250 1990-1991

     

    For Pontiac:

    For Pontiac Vibe 2003-2008

     

    For Scion:

    For Scion tC 2005-2010    

    For Scion xD 2009-2014

     

    For Toyota :

    For Toyota Camry 1986-1991           

    For Toyota Celica 1993-2005 5 Lug Only       

    For Toyota Corolla 2003-2023          

    For Toyota Matrix 2003-2013          

    For Toyota Prius 2004-2022

     

    The main reason for vibration from wheel spacers

     

    In fact ,wheel spacers in themselves don’t cause vibration,they are just increasing the cars sensitivity to a pre-existing problem.Wheel spacers could be magnifying an existing imbalance or out-of-round condition in tires. Also, this may be incompatible with the natural frequency of the front control arm bushings. Most likely, though, is an amplified pre-existing problem.Anyway,a few causes lead to vibration.


    1.Sometimes wheel weights get knocked off or lost when pulling wheels on/off the car.
    2.If the wheels were out of balance, the spacers would magnify the effect.
    3.Its possible that the wheels didn't seat correctly on the hubs. Lowering the car more than was necessary to keep the wheel from turning.

     

    How to fix the problem ?

     

    1. Firstly, getting rid of the problem of wheel spacers themselves and making sure everything was mating up correctly.

    For example,wheel bore should match the hub.When the wheel is in the air, give it a spin and check for any misalignment/wobble/etc.Both the face of the wheel hub and the back of the wheel spacers are clean,no rust or corrosion. Maybe it is just a small burr on one surface.Make sure wheel bolts are long enough and are torqued and retorqued after a few miles.After check it,pls try to remove them and re-install.

    2. Rebalance or correct an out of round condition of your tires

    Following the above step,removed everything, cleaned/inspected for any small dents/gashes in the wheels/hubs/spacers, put everything back together and torqued the bolts in a star pattern with only a bit of weight on the wheels but it’s still vibrating.Then it’s certainly the vibration wasn’t caused by wheel spacers but there is an existing imbalance or out of round in a tire of your car.Then you need to go for a rebalance.Finding a technician that actually understands how the tire balance works. Most better shops can handle this. Just go in and ask if the technician knows how to overide the automatic zero or whatever its called. Expect to pay extra for the additional time it will take.If the tire may be out of round, in which case a small amount of shaving will be necessary. If you find a shop that can correct an out of round condition, we’ll assume they also understand balancing to less than 1/8 oz.And the problem is now almost gone.

    3. Very smooth roads don't cause any vibration.

    After rebalance or correct an out of round condition of your tires,any vibration left its entirely road induced.Very smooth roads don't cause any vibration.

    Item Specifics
    Manufacturer Part Number :SCI128881TOO
    Brand :Scitoo
    Vehicle Bolt Pattern :5x100mm
    Wheel Bolt Pattern :5x100mm
    Hub Bore :54.1mm
    Centric :Hub and Wheel Centric (W/Lip)
    Spacer Thickness :20mm
    Thread Size :12X1.5 or 12mmX1.5 or M12X1.5
    Type :Wheel Spacers
    Number of Pieces :2
    Color :Black
    Items Included :2 pcs Wheel Spacers
    Placement on Vehicle :Front,Rear,Left,Right
    Features :Easy Installation
    Material :Aluminum
    Universal Fitment :No
    Bolt Pattern :5x100mm
    Torqued Down By Hand At :70-80 FT/LBS
    Interchange Part Number :For Toyota Fits Lexus 5x100mm PCD-M12x1.5
    OE/OEM Part Number :5x100mm-M12x1.5-20mm-Black-Wheel Spacers
    Bolt Shank Length :26 mm


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    [We only accept payment through PayPal. You can open a Paypal account at]

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    1. We will leave a feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.





    Brand: Scitoo
    Isin: IGXJ4FV9BC0X

    $90.62

    • Free shipping in US

    • Arrives:

    • Free 30-Day returns

    In Stock

    Sold by , Fulfilled by IBSPOT
    Ships from USA

    IBspot Buyer Protection

    Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

    supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

    GUARANTEED SAFE CHECKOUT

    More seller options

    Starting from

    Compare all sellers

    • MONEY BACK GUARANTEE

      30 days money back guarantee, no additional fee charged.

    • EXCELLENT SUPPORT

      We provide 24/7 online customer support via email.

    • Fast Shipping

      One week domestic shipping. Global delivery to the US in 2 weeks.

    scroll to top arrow
    Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

    Scitoo 2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-20...

    $90.62

  • How to choose correct wheel spacers/ adapters?
  •  
  • 1. Check Your Vehicle/ Wheel Bolt Pattern/ PCD - 5x100mm
  •  
  • The bolt pattern of a wheel is the layout of the mounting holes. A wheel's bolt pattern can also be called its "Bolt Circle" or "Pitch Circle Diameter (PCD)".
  • Bolt pattern is expressed as the number of lugs by the diameter of the imaginary circle formed by the center of the lugs. For example, 5 x 4.5 in., or 4 x 100mm.
  • The bolt pattern MUST match the pattern on the axle hub. Even a slight difference will cause the wheel to be off-center. This will cause excessive vibration while driving.
  • 2. Check Vehicle Hub Bore Size - 54.1mm
    		•

    content_src_url



    2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

    How to choose correct wheel spacers/ adapters?

     

    1. Check Your Vehicle/ Wheel Bolt Pattern/ PCD - 5x100mm

     

    The bolt pattern of a wheel is the layout of the mounting holes. A wheel's bolt pattern can also be called its "Bolt Circle" or "Pitch Circle Diameter (PCD)".

    Bolt pattern is expressed as the number of lugs by the diameter of the imaginary circle formed by the center of the lugs. For example, 5 x 4.5 in., or 4 x 100mm.

    The bolt pattern MUST match the pattern on the axle hub. Even a slight difference will cause the wheel to be off-center. This will cause excessive vibration while driving.

    2. Check Vehicle Hub Bore Size - 54.1mm

     

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

     

    3. Check Vehicle Thread Pitch - M12X1.5

     

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    4. Measure the fender gap to choose suitable thickness. - 20mm

     

    The thickness of spacer you need will vary depending on the individual vehicles you’ve performed, determining that correct thickness is extremely important.
    Measuring the wheel gap is the most basic beginning. The wheel gap is the amount of space between the inner fender lip and the outside edge of your wheel tires or rims.

     

    1. Preparing two rulers, take one ruler in each hand, set one flat against the inner fender lip hanging down as straight as possible. Measure the distance from the tire or rim edge to the hanging ruler. This distance is the amount of room you have till you would have contact. You will want to get a spacer smaller than this number.
    2. If you have a straight edge metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size spacer you will need to achieve the look that flushes or nearly flushes with the fender.

     

    Every car’s wheel gap is various, even if they the same exact cars, the wheel gap of the front wheel and the rear wheel is different. Always measure first before buying wheel spacers. Too thin, you will still have wheel/caliper interference. Too thick, the wheel rims or tires will hit the fenders. The proper thickness will give you the brake clearance and wheel offset you need while avoiding fender rub as well as breaking local laws and regulations.

     

    Vehicle Fitment Information as Follow

     

    For Lexus:

    For Lexus CT200h 2011-2017

    For Lexus ES250 1990-1991

     

    For Pontiac:

    For Pontiac Vibe 2003-2008

     

    For Scion:

    For Scion tC 2005-2010    

    For Scion xD 2009-2014

     

    For Toyota :

    For Toyota Camry 1986-1991           

    For Toyota Celica 1993-2005 5 Lug Only       

    For Toyota Corolla 2003-2023          

    For Toyota Matrix 2003-2013          

    For Toyota Prius 2004-2022

     

    The main reason for vibration from wheel spacers

     

    In fact ,wheel spacers in themselves don’t cause vibration,they are just increasing the cars sensitivity to a pre-existing problem.Wheel spacers could be magnifying an existing imbalance or out-of-round condition in tires. Also, this may be incompatible with the natural frequency of the front control arm bushings. Most likely, though, is an amplified pre-existing problem.Anyway,a few causes lead to vibration.


    1.Sometimes wheel weights get knocked off or lost when pulling wheels on/off the car.
    2.If the wheels were out of balance, the spacers would magnify the effect.
    3.Its possible that the wheels didn't seat correctly on the hubs. Lowering the car more than was necessary to keep the wheel from turning.

     

    How to fix the problem ?

     

    1. Firstly, getting rid of the problem of wheel spacers themselves and making sure everything was mating up correctly.

    For example,wheel bore should match the hub.When the wheel is in the air, give it a spin and check for any misalignment/wobble/etc.Both the face of the wheel hub and the back of the wheel spacers are clean,no rust or corrosion. Maybe it is just a small burr on one surface.Make sure wheel bolts are long enough and are torqued and retorqued after a few miles.After check it,pls try to remove them and re-install.

    2. Rebalance or correct an out of round condition of your tires

    Following the above step,removed everything, cleaned/inspected for any small dents/gashes in the wheels/hubs/spacers, put everything back together and torqued the bolts in a star pattern with only a bit of weight on the wheels but it’s still vibrating.Then it’s certainly the vibration wasn’t caused by wheel spacers but there is an existing imbalance or out of round in a tire of your car.Then you need to go for a rebalance.Finding a technician that actually understands how the tire balance works. Most better shops can handle this. Just go in and ask if the technician knows how to overide the automatic zero or whatever its called. Expect to pay extra for the additional time it will take.If the tire may be out of round, in which case a small amount of shaving will be necessary. If you find a shop that can correct an out of round condition, we’ll assume they also understand balancing to less than 1/8 oz.And the problem is now almost gone.

    3. Very smooth roads don't cause any vibration.

    After rebalance or correct an out of round condition of your tires,any vibration left its entirely road induced.Very smooth roads don't cause any vibration.


    Item Specifics
    Manufacturer Part Number :SCI128881TOO
    Brand :Scitoo
    Vehicle Bolt Pattern :5x100mm
    Wheel Bolt Pattern :5x100mm
    Hub Bore :54.1mm
    Centric :Hub and Wheel Centric (W/Lip)
    Spacer Thickness :20mm
    Thread Size :12X1.5 or 12mmX1.5 or M12X1.5
    Type :Wheel Spacers
    Number of Pieces :2
    Color :Black
    Items Included :2 pcs Wheel Spacers
    Placement on Vehicle :Front,Rear,Left,Right
    Features :Easy Installation
    Material :Aluminum
    Universal Fitment :No
    Bolt Pattern :5x100mm
    Torqued Down By Hand At :70-80 FT/LBS
    Interchange Part Number :For Toyota Fits Lexus 5x100mm PCD-M12x1.5
    OE/OEM Part Number :5x100mm-M12x1.5-20mm-Black-Wheel Spacers
    Bolt Shank Length :26 mm

    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    Payment

    [We only accept payment through PayPal. You can open a Paypal account at]

    Returns

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]

    Customer Services

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Feedback

    1. We will leave a feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.

    Shop Category
    Picture

    content_src_url
    2 X 20mm 5x100 Wheel Spacers M12x1.5 54.1mm For Toyota Corolla 2003-2022 2023

    How to choose correct wheel spacers/ adapters?

     

    1. Check Your Vehicle/ Wheel Bolt Pattern/ PCD - 5x100mm

     

    The bolt pattern of a wheel is the layout of the mounting holes. A wheel's bolt pattern can also be called its "Bolt Circle" or "Pitch Circle Diameter (PCD)".

    Bolt pattern is expressed as the number of lugs by the diameter of the imaginary circle formed by the center of the lugs. For example, 5 x 4.5 in., or 4 x 100mm.

    The bolt pattern MUST match the pattern on the axle hub. Even a slight difference will cause the wheel to be off-center. This will cause excessive vibration while driving.

    2. Check Vehicle Hub Bore Size - 54.1mm

     

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

     

    3. Check Vehicle Thread Pitch - M12X1.5

     

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    4. Measure the fender gap to choose suitable thickness. - 20mm

     

    The thickness of spacer you need will vary depending on the individual vehicles you’ve performed, determining that correct thickness is extremely important.
    Measuring the wheel gap is the most basic beginning. The wheel gap is the amount of space between the inner fender lip and the outside edge of your wheel tires or rims.

     

    1. Preparing two rulers, take one ruler in each hand, set one flat against the inner fender lip hanging down as straight as possible. Measure the distance from the tire or rim edge to the hanging ruler. This distance is the amount of room you have till you would have contact. You will want to get a spacer smaller than this number.
    2. If you have a straight edge metal ruler, place the straight edge on the outermost part of the rims where the wheel comes closest to the fender (preferably the top), then, measure from the outside wheel to the straight edge. This distance is the size spacer you will need to achieve the look that flushes or nearly flushes with the fender.

     

    Every car’s wheel gap is various, even if they the same exact cars, the wheel gap of the front wheel and the rear wheel is different. Always measure first before buying wheel spacers. Too thin, you will still have wheel/caliper interference. Too thick, the wheel rims or tires will hit the fenders. The proper thickness will give you the brake clearance and wheel offset you need while avoiding fender rub as well as breaking local laws and regulations.

     

    Vehicle Fitment Information as Follow

     

    For Lexus:

    For Lexus CT200h 2011-2017

    For Lexus ES250 1990-1991

     

    For Pontiac:

    For Pontiac Vibe 2003-2008

     

    For Scion:

    For Scion tC 2005-2010    

    For Scion xD 2009-2014

     

    For Toyota :

    For Toyota Camry 1986-1991           

    For Toyota Celica 1993-2005 5 Lug Only       

    For Toyota Corolla 2003-2023          

    For Toyota Matrix 2003-2013          

    For Toyota Prius 2004-2022

     

    The main reason for vibration from wheel spacers

     

    In fact ,wheel spacers in themselves don’t cause vibration,they are just increasing the cars sensitivity to a pre-existing problem.Wheel spacers could be magnifying an existing imbalance or out-of-round condition in tires. Also, this may be incompatible with the natural frequency of the front control arm bushings. Most likely, though, is an amplified pre-existing problem.Anyway,a few causes lead to vibration.


    1.Sometimes wheel weights get knocked off or lost when pulling wheels on/off the car.
    2.If the wheels were out of balance, the spacers would magnify the effect.
    3.Its possible that the wheels didn't seat correctly on the hubs. Lowering the car more than was necessary to keep the wheel from turning.

     

    How to fix the problem ?

     

    1. Firstly, getting rid of the problem of wheel spacers themselves and making sure everything was mating up correctly.

    For example,wheel bore should match the hub.When the wheel is in the air, give it a spin and check for any misalignment/wobble/etc.Both the face of the wheel hub and the back of the wheel spacers are clean,no rust or corrosion. Maybe it is just a small burr on one surface.Make sure wheel bolts are long enough and are torqued and retorqued after a few miles.After check it,pls try to remove them and re-install.

    2. Rebalance or correct an out of round condition of your tires

    Following the above step,removed everything, cleaned/inspected for any small dents/gashes in the wheels/hubs/spacers, put everything back together and torqued the bolts in a star pattern with only a bit of weight on the wheels but it’s still vibrating.Then it’s certainly the vibration wasn’t caused by wheel spacers but there is an existing imbalance or out of round in a tire of your car.Then you need to go for a rebalance.Finding a technician that actually understands how the tire balance works. Most better shops can handle this. Just go in and ask if the technician knows how to overide the automatic zero or whatever its called. Expect to pay extra for the additional time it will take.If the tire may be out of round, in which case a small amount of shaving will be necessary. If you find a shop that can correct an out of round condition, we’ll assume they also understand balancing to less than 1/8 oz.And the problem is now almost gone.

    3. Very smooth roads don't cause any vibration.

    After rebalance or correct an out of round condition of your tires,any vibration left its entirely road induced.Very smooth roads don't cause any vibration.

    Item Specifics
    Manufacturer Part Number :SCI128881TOO
    Brand :Scitoo
    Vehicle Bolt Pattern :5x100mm
    Wheel Bolt Pattern :5x100mm
    Hub Bore :54.1mm
    Centric :Hub and Wheel Centric (W/Lip)
    Spacer Thickness :20mm
    Thread Size :12X1.5 or 12mmX1.5 or M12X1.5
    Type :Wheel Spacers
    Number of Pieces :2
    Color :Black
    Items Included :2 pcs Wheel Spacers
    Placement on Vehicle :Front,Rear,Left,Right
    Features :Easy Installation
    Material :Aluminum
    Universal Fitment :No
    Bolt Pattern :5x100mm
    Torqued Down By Hand At :70-80 FT/LBS
    Interchange Part Number :For Toyota Fits Lexus 5x100mm PCD-M12x1.5
    OE/OEM Part Number :5x100mm-M12x1.5-20mm-Black-Wheel Spacers
    Bolt Shank Length :26 mm


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    [We only accept payment through PayPal. You can open a Paypal account at]

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    1. We will leave a feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.





    • UPC: Does not apply
    • Manufacturer Part Number: SCI128881TOO
    • Brand: Scitoo
    • Vehicle Bolt Pattern: 5x100mm
    • Wheel Bolt Pattern: 5x100mm
    • Hub Bore: 54.1mm
    • Centric: Hub and Wheel Centric (W/Lip)
    • Spacer Thickness: 20mm
    • Thread Size: 12X1.5 or 12mmX1.5 or M12X1.5
    • Type: Wheel Spacers
    • Number of Pieces: 2
    • Color: Black
    • Items Included: 2 pcs Wheel Spacers
    • Placement on Vehicle: Front,Rear,Left,Right
    • Features: Easy Installation
    • Material: Aluminum
    • Universal Fitment: No
    • Bolt Pattern: 5x100mm
    • Torqued Down By Hand At: 70-80 FT/LBS
    • Interchange Part Number: For Toyota Fits Lexus 5x100mm PCD-M12x1.5
    • OE/OEM Part Number: 5x100mm-M12x1.5-20mm-Black-Wheel Spacers
    • Bolt Shank Length: 26 mm

     

    Processing Time

    • We process and ship orders Monday through Friday, excluding holidays.
    • Most orders are processed within 1–3 business days, depending on product availability.
    • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

    Shipping Coverage

    We currently ship to addresses within the United States only.

    Products may ship from:

    • Our U.S. warehouses, or
    • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

    Each product page clearly displays the “Ships From” location before checkout.

    Shipping Methods & Estimated Delivery

     

    Shipping Method Estimated Delivery Cost
    Free Shipping (US) 5–10 business days Free, available on eligible items
    Standard Shipping (US to US by Item) 5–10 business days $6.50 for the first item, $3.00 each additional
    Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
    Extended Delivery (Ships from Overseas Warehouse) 10–15 business days $14.50 for the first item, $4.00 each additional

    Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

    Free Shipping

    We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 

    Carriers

    We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.

    Import Duties & Taxes

    All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.

    Tracking & Notifications

    Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

    You can track your shipment anytime using the Track Your Order page on our website.

    Order Changes & Cancellations

    If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

    Contact: support@ibspot.com

    Item Not Received

    If your tracking number shows “Delivered” but you haven’t received your package:

    1. Check with your local USPS or UPS office.
    2. Confirm that the shipping address provided was correct.
    3. If the issue remains unresolved, contact support@ibspot.com for assistance.

    Damaged or Lost Parcels

    If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.

    Customer Support

    For any questions about shipping, tracking, or delivery, our customer support team is here to help.

    Email: support@ibspot.com

    We’re always happy to help.

    Please read our policy carefully before making a purchase.
    We aim to ensure every customer has a smooth and transparent experience with ibspot.com.

    Order Cancellation Policy

    Customers may request to cancel an order before it has been shipped.
    Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

    How to Request a Cancellation

    You can contact us through:

    Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.

    Return Policy

    We accept returns for most items within 30 days of delivery for a full refund.

    To be eligible for a return:

    • The item must be unused, in the same condition as received, and in its original packaging.

    • A tracking number must be provided to confirm the return shipment.

    Non-Returnable Items

    Certain products cannot be returned, including:

    • Perishable goods (for example, food, flowers, newspapers, magazines)

    • Intimate or sanitary goods

    • Hazardous materials or flammable liquids/gases

    • Gift cards

    • Downloadable software

    • Some health and personal care items

    Partial Refunds (If Applicable)

    Partial refunds may be granted in specific situations, such as:

    • Books with obvious signs of use

    • Opened CDs, DVDs, software, or vinyl records

    • Items not in their original condition, damaged, or missing parts not due to our error

    • Items returned more than 30 days after delivery

    How to Return an Item

    To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
    Our team will provide you with return instructions and a prepaid return label.

    Shipping Cost for Returns

    Please contact us before returning any item.
    We will provide a free return shipping label.

    If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

    For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
    We cannot guarantee that we will receive your returned item if shipped independently.

    Refund Processing

    Once your return is received and inspected:

    • In-store returns are refunded to the original form of payment or issued as a gift card.

    • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

    Please allow:

    • 5–7 business days for the return to reach our Returns Center.

    • An additional 3–10 business days for your bank to post the refund to your account.

    Damages, Issues & Claims

    Please inspect your order immediately upon receipt.
    If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
    We’ll evaluate the issue promptly and make it right.

    Product Claims

    Before purchasing, please review product details carefully.
    If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.

    Exchanges

    We do not process direct exchanges.
    The fastest way to get what you need is to return the original item and place a new order once your return is accepted.

    Return Address

    IBSPOT Return Center
    15 Sawmill Ln
    Dover Plains, NY 12522
    United States

    Customer Support

    Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

    Email: support@ibspot.com
    Contact Form: Contact Us page

    Oops!

    Sorry, it looks like some products are not available in selected quantity.

    OK

    Subscribe To Our Newsletter

    Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.