Pyramex Custom Ridgeline WideBrim Hard Hat OSHA Hydro Dipped AMERICAN MONEY DEAD HEADZ
Pyramex Custom Ridgeline WideBrim Hard Hat OSHA Hydro Dipped AMERICAN MONEY DEAD HEADZ
Pyramex Custom Ridgeline WideBrim Hard Hat OSHA Hydro Dipped AMERICAN MONEY DEAD HEADZ
For sale a genuine WET WORKS IMAGING hydro dipped hard hat . That has been custom dipped and then clear coated for that mirror like shine you see in our photos . We are the only hydro dippers approved by the manufacturer to dip the Ridgeline hard hat . We meet stringent quality control guidelines that manufacturers demand , so you know you are getting a quality product . All Ridgeline hard hats that we sell are ANSI TYPE 1 CLASS C, G , AND E , OSHA APPROVED , and come with a fully adjustable swing and ratchet head gear that fits hat size 6 3/4 to 8. Padded rear section of head gear is a super nice touch not to mention the super soft replaceable front sweat band., the head gear is also fully adjustable front to back and up and down 2 different positions each and this is one of the lightest hard hats on the market coming in at under a pound WOW!!!!!!! This type of quality fit and finish and don't forget the PRICE . There's only one place to get all this .WET WORKS IMAGING . All of our hard hats comes with free shipping and the piece of mind you are getting the best in our opinion hard hat out there . All images will be as close to photos as possible , please bear in mind that hydro dipped hard hats are like finger prints two will look close but never the same . So yours will be unique to you and only you . All of our Ridgeline hard hats are direct bond to plastic application meaning no chance of the print lifting off of any of our hard hats , the clear coat may scratch but rest assured the print will not come off . WET WORKS IMAGING OFFERING UP TOP QUALITY CUSTOM HARD HATS AT A PRICE THAT CANT BE BEAT !!!!!!!!! DEMAND THE BEST , DEMAND
WET WORKS IMAGING
OSHA regulations mandate specific requirements for head protection in the workplace. As with many OSHA standards, these rules incorporate standards from the American National Standards Institute (ANSI). OSHA provides the regulations to follow, and ANSI provides the means to follow those regulations.
When Does OSHA Require Hard Hats?
OSHA has two standards that govern hard hat requirements:
- 29 CFR 1910.135 governs
- 29 CFR 1926.100 refers to
Both standards require workers to wear hard hats when there is a potential for head injury from “impacts, falling or flying objects, or electrical shock.”
This means that employers must provide hard hats and ensure that employees wear protective coverings in the following situations:
- When objects or debris might fall from above and strike workers on the head
- When employees may strike their heads against fixed objects, like supports, beams, or other equipment
- When there is the possibility that workers’ heads will make contact with electrical hazards
In all cases, hard hats must meet OSHA head protection requirements.
When Does a Hard Hat Meet OSHA’s Requirements?
A hard hat that meets ANSI Z89.1 is OSHA compliant. 29 CFR 1910.135(b)(1) and 29 CFR 1926.100(b)(1) state that head protection must meet the 1997, 2003, or 2009 editions of ANSI Z89.1, or be shown to offer equivalent or better protection.
This standard defines:
- Types and classes of hard hats for specific hazardous situations
- Design and performance requirements for impact, penetration, and electrical shock
- Testing requirements to ensure OSHA compliance
Although manufacturers typically test and certify their products, employers need to verify that their hard hats meet OSHA’s requirements.
What Are the Different ANSI Hard Hat Categories?
ANSI Z89.1 defines two types of hard hats and establishes three classes of hard hats based on the level of electrical hazard protection provided.
Hard Hat Types: The two types of hard hats are defined by the area of the head that is protected.
- Type I offers protection to the top of the head and is commonly used in the United States
- Type II offers protection to the top and sides of the head and is commonly used in Europe
Hard Hat Classes: The three classes are based on the level of protection they provide from electrical hazards.
- Class G (General) hard hats are rated for 2,200 volts
- Class E (Electrical) hard hats are rated for 20,000 volts
- Class C (Conductive) hard hats do not offer electrical protection
Does My Hard Hat Meet ANSI Requirements?
Each revision of the ANSI Z89.1 standard has specific labeling requirements for hard hats. Each hard hat must have the following information clearly marked inside the hat:
- Manufacturer's name
- ANSI standard that the hard hat conforms with, such as "ANSI Z89.1-2009"
- ANSI type (type I or II) and class designation (G, E or C)
- Size range for fitting
- Date of manufacture
If the hard hat meets Z89.1-2009, it must also contain the following as required:
- Two arrows curving to form a circle when the helmet can be worn forwards or backwards
- LT – When the helmet is designed to provide protection at low temperatures 22 °F (-30 °C).
- HV – When the helmet meets all requirements for high visibility.
Instructions for care and use must accompany, but do not need to be included on, the hard hat.
If your hard hat does not have any of this information included, it may not comply with OSHA. Contact the manufacturer for documentation proving OSHA compliance.
When Do I Need to Replace My Hard Hat?
Hard hats must be replaced if they show signs of damage (dents, cracks, penetration, or fatigue due to rough treatment). It is essential to inspect hard hats for damage and signs of fatigue each time they are used. In addition to visual inspections, another way to test a hard hat is to grasp it in two hands and apply force by squeezing the hat. If you hear creaking or other unusual sounds, it is time to replace the hard hat.
While OSHA has no specific provision for an expiration date, manufacturers are allowed to determine if their equipment expires on a specific calendar date. In lieu of an expiration date, a generally accepted rule is to replace the support strap yearly and to replace the hard hat every five years. Harsh chemicals and extreme temperatures can make a hard hat degrade more quickly. Be sure to check with the manufacturer for guidelines on hard hat replacement and maintenance.
A hard hat may also expire if OSHA adopts more rigorous requirements. It is essential to regularly check OSHA STANDARDS for changes that may require your PPE to be updated.
Can I Place Labels on My Hard Hat?
While ANSI Z89.1 does not restrict the application of hard hat labels, OSHA standard 1910.132(a) requires that PPE is “maintained in a sanitary and reliable condition.”
, OSHA explains that labels and paints may eliminate electrical resistance and can possibly “conceal defects, cracks, penetration, and any damage that would be otherwise readily identifiable.” OSHA goes on to explain that any labels or paint used on hard hats must comply with manufacturer’s instructions, or the employer must demonstrate that the labels do not affect the reliability or “reduce the ability to identify defects.”
In short, labels are acceptable if they do not adversely affect a hard hat’s protective rating or make it more difficult to find potential defects and damage.
Some beneficial uses of labels include placing names, titles, and certifications on hard hats. Labels with names and titles can help identify workers in emergencies, while certifications can help identify when workers are authorized to be in specific areas. In all cases, labels should be used strategically, to convey information when needed. Labels should not be used for purely decorative purposes.
How can Graphic Products Help with Head Protection?
Graphic Products offers an extensive line of hard hats that meet OSHA and ANSI r
| Brand: | Pyramex |
|---|---|
| Isin: | IZSVFANTE5FJ |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
For sale a genuine WET WORKS IMAGING hydro dipped hard hat . That has been custom dipped and then clear coated for that mirror like shine you see in our photos . We are the only hydro dippers approved by the manufacturer to dip the Ridgeline hard hat . We meet stringent quality control guidelines that manufacturers demand , so you know you are getting a quality product . All Ridgeline hard hats that we sell are ANSI TYPE 1 CLASS C, G , AND E , OSHA APPROVED , and come with a fully adjustable swing and ratchet head gear that fits hat size 6 3/4 to 8. Padded rear section of head gear is a super nice touch not to mention the super soft replaceable front sweat band., the head gear is also fully adjustable front to back and up and down 2 different positions each and this is one of the lightest hard hats on the market coming in at under a pound WOW!!!!!!! This type of quality fit and finish and don't forget the PRICE . There's only one place to get all this .WET WORKS IMAGING . All of our hard hats comes with free shipping and the piece of mind you are getting the best in our opinion hard hat out there . All images will be as close to photos as possible , please bear in mind that hydro dipped hard hats are like finger prints two will look close but never the same . So yours will be unique to you and only you . All of our Ridgeline hard hats are direct bond to plastic application meaning no chance of the print lifting off of any of our hard hats , the clear coat may scratch but rest assured the print will not come off . WET WORKS IMAGING OFFERING UP TOP QUALITY CUSTOM HARD HATS AT A PRICE THAT CANT BE BEAT !!!!!!!!! DEMAND THE BEST , DEMAND
WET WORKS IMAGING
OSHA regulations mandate specific requirements for head protection in the workplace. As with many OSHA standards, these rules incorporate standards from the American National Standards Institute (ANSI). OSHA provides the regulations to follow, and ANSI provides the means to follow those regulations.
When Does OSHA Require Hard Hats?
OSHA has two standards that govern hard hat requirements:
- 29 CFR 1910.135 governs
- 29 CFR 1926.100 refers to
Both standards require workers to wear hard hats when there is a potential for head injury from “impacts, falling or flying objects, or electrical shock.”
This means that employers must provide hard hats and ensure that employees wear protective coverings in the following situations:
- When objects or debris might fall from above and strike workers on the head
- When employees may strike their heads against fixed objects, like supports, beams, or other equipment
- When there is the possibility that workers’ heads will make contact with electrical hazards
In all cases, hard hats must meet OSHA head protection requirements.
When Does a Hard Hat Meet OSHA’s Requirements?
A hard hat that meets ANSI Z89.1 is OSHA compliant. 29 CFR 1910.135(b)(1) and 29 CFR 1926.100(b)(1) state that head protection must meet the 1997, 2003, or 2009 editions of ANSI Z89.1, or be shown to offer equivalent or better protection.
This standard defines:
- Types and classes of hard hats for specific hazardous situations
- Design and performance requirements for impact, penetration, and electrical shock
- Testing requirements to ensure OSHA compliance
Although manufacturers typically test and certify their products, employers need to verify that their hard hats meet OSHA’s requirements.
What Are the Different ANSI Hard Hat Categories?
ANSI Z89.1 defines two types of hard hats and establishes three classes of hard hats based on the level of electrical hazard protection provided.
Hard Hat Types: The two types of hard hats are defined by the area of the head that is protected.
- Type I offers protection to the top of the head and is commonly used in the United States
- Type II offers protection to the top and sides of the head and is commonly used in Europe
Hard Hat Classes: The three classes are based on the level of protection they provide from electrical hazards.
- Class G (General) hard hats are rated for 2,200 volts
- Class E (Electrical) hard hats are rated for 20,000 volts
- Class C (Conductive) hard hats do not offer electrical protection
Does My Hard Hat Meet ANSI Requirements?
Each revision of the ANSI Z89.1 standard has specific labeling requirements for hard hats. Each hard hat must have the following information clearly marked inside the hat:
- Manufacturer's name
- ANSI standard that the hard hat conforms with, such as "ANSI Z89.1-2009"
- ANSI type (type I or II) and class designation (G, E or C)
- Size range for fitting
- Date of manufacture
If the hard hat meets Z89.1-2009, it must also contain the following as required:
- Two arrows curving to form a circle when the helmet can be worn forwards or backwards
- LT – When the helmet is designed to provide protection at low temperatures 22 °F (-30 °C).
- HV – When the helmet meets all requirements for high visibility.
Instructions for care and use must accompany, but do not need to be included on, the hard hat.
If your hard hat does not have any of this information included, it may not comply with OSHA. Contact the manufacturer for documentation proving OSHA compliance.
When Do I Need to Replace My Hard Hat?
Hard hats must be replaced if they show signs of damage (dents, cracks, penetration, or fatigue due to rough treatment). It is essential to inspect hard hats for damage and signs of fatigue each time they are used. In addition to visual inspections, another way to test a hard hat is to grasp it in two hands and apply force by squeezing the hat. If you hear creaking or other unusual sounds, it is time to replace the hard hat.
While OSHA has no specific provision for an expiration date, manufacturers are allowed to determine if their equipment expires on a specific calendar date. In lieu of an expiration date, a generally accepted rule is to replace the support strap yearly and to replace the hard hat every five years. Harsh chemicals and extreme temperatures can make a hard hat degrade more quickly. Be sure to check with the manufacturer for guidelines on hard hat replacement and maintenance.
A hard hat may also expire if OSHA adopts more rigorous requirements. It is essential to regularly check OSHA STANDARDS for changes that may require your PPE to be updated.
Can I Place Labels on My Hard Hat?
While ANSI Z89.1 does not restrict the application of hard hat labels, OSHA standard 1910.132(a) requires that PPE is “maintained in a sanitary and reliable condition.”
, OSHA explains that labels and paints may eliminate electrical resistance and can possibly “conceal defects, cracks, penetration, and any damage that would be otherwise readily identifiable.” OSHA goes on to explain that any labels or paint used on hard hats must comply with manufacturer’s instructions, or the employer must demonstrate that the labels do not affect the reliability or “reduce the ability to identify defects.”
In short, labels are acceptable if they do not adversely affect a hard hat’s protective rating or make it more difficult to find potential defects and damage.
Some beneficial uses of labels include placing names, titles, and certifications on hard hats. Labels with names and titles can help identify workers in emergencies, while certifications can help identify when workers are authorized to be in specific areas. In all cases, labels should be used strategically, to convey information when needed. Labels should not be used for purely decorative purposes.
How can Graphic Products Help with Head Protection?
Graphic Products offers an extensive line of hard hats that meet OSHA and ANSI r
- Model: Ridgeline WideBrim
- Brand: Pyramex
- Hat Suspension: Ratchet
- Modified Item: Yes
- Hat Color: White
- Modification Description: hydro dipped
- MPN: Does Not Apply
- UPC: 0722034637785
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.