Optiwand Soft Contact Lens Insertion & Removal Tool
Optiwand Soft Contact Lens Insertion & Removal Tool
Optiwand Soft Contact Lens Insertion & Removal Tool
OptiWand Single - Colors Vary between Blue or Green
OptiWand is made of SOFT PLIABLE RUBBER &
Is a Soft Contact Lens Insertion & Removal Tool.
APPLYING EYE DROPS PRIOR TO INSERTION IS A MUST FOR THIS TO WORK PROPERLY!! It helps transfer the lens from wand to eye and vice versa much easier.
It can be used to INSERT ALL CONTACT LENSES.
It WILL remove soft contact lenses with some practice & patience by PINCHING THEM WITH THE SOFT ENDS!
****************
IT IS NOT A SUCTION CUP FOR SOFT LENSES
We strongly recommend starting with insertion as it should be easier to perfect
Removal's pinch can be tricky but once mastered it is super simple
Practice and patience are a must and old habits must be broken in order to use it properly
Soft contact lenses are NOT a SOLID material and CANNOT be grabbed by placing the OptiWand against them
You must break the bond between contact lens & your CORNEA where your lenses sit securely as designed
IT WILL NOT Remove RGP/Hard/Sclera lenses
The Split Cup side will insert Sclera lenses and either side will insert RGP
*It has an EMERGENCY BLINK RELEASE TO PREVENT STICKING TO NAKED EYE *
For proper insertion you must focus on the CENTER HOLE and not a mirror or other source.
The soft contact LENS WILL NOT come off the OptiWand unless it is placed properly directly on the cornea.
If you are bringing it in at an angle the contact lens will stay on the OptiWand and not come off on to the eye as intended.
Using OptiWand for inserting SOFT & HARD Contact Lenses
Step 1: Apply Eye Drops prior to use! Dip your OptiWand in Contact Lens solution for lubrication.
Step 2: Position your regular sized HARD or SOFT contact lens on the center of FULL CUP SIDE of the OptiWand. If you have small soft eyes or hard lenses you can use the SPLIT CUP end and use the following steps. The OptiWand is designed to hold the lens during insertion.
Step 3: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 4: Draw the OptiWandto your eye by looking DIRECTLY AT THE LENS through the CENTER HOLE to align properly.
*Aiming the OptiWand at a colored background or light will help some to focus on the CENTER HOLE*
Step 5: Once it is close enough and the contact lens touches your eye, give the OptiWand a slight TWIST to help release the lens.
Step 6: Blink your contact into place.
Now your lens is centered on your eye.
* Make sure to hold eyelashes away to prevent blockage. *
WARNING **NEVER USEOptiWandON NAKED EYE**
Please DO NOT USE the OptiWand if you are allergic to Liquid Silicone Rubber!
Using OptiWand for Removing SOFT Contact Lenses
YOU CAN USE THE FULL CUP OR SPLIT CUP TO PINCH SOFT LENSES.
SPLIT CUP END IS BEST IF YOU HAVE SMALL EYES OR LENSES.
FULL CUP END IS BEST FOR LARGER FINGERS OR LONG FINGERNAILS.
Step 1: Apply Eye Drops prior to use! We suggest using a DRY OptiWand for Soft Contact Lens removal for best results.
Step 2: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 3: Focusing through the CENTER HOLE, draw the OptiWand to your eye until you touch the soft contact lens.
Step 4: Once you feel theOptiWandtouch the soft contact lens you should twist it slightly then carefully pinch the soft contact lens with the Base of theOptiWandand swipe away from eye. Some users can turn the OptiWand towards their noses after it makes contact and that will help push it out.
*Best pinching position is very close to the tip*
Final Step: DipOptiWandinto contact lens solution in current case and the lens will fall down into the solution with a pinch on the Full cup.
We suggest placing the soft lens on your non dominant index finger and PRACTICE THE PINCH OFF OF YOUR FINGER to get a feel for actual removal.
If you pinch the soft contact lens off of a finger a few times you will be able to visualize what it takes to pinch effectively.
Using OptiWand for inserting Large Sclera contact lenses
Step 1: Dip your OptiWand SPLIT CUP SIDE in Contact Lens solution for lubrication
Step 2: Stand the OptiWand up on the counter or table top with the Split cup side up
Step 3: Position your Sclera contact lens on the center of the SPLIT CUP SIDE of the OptiWand
Step 4: Look & stay focused on the CENTER HOLE for proper alignment.
* Some prefer to have a colored background to help focus on the CENTER HOLE *
Step 5: Spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 6: Slowly draw to the OptiWand until the contact lens makes contact with the eye.
Step 7: Blink until comfortable
USE ONLY AS DIRECTED!
These statements have not been evaluated by the Food and Drug Administration.
This product is not intended to diagnose, treat, cure, or prevent any disease.
Please read and follow instructions as well as view the instructional videos for best results.
OptiWand®, OptiWand Pincher®, OptiWand Bullseye®, OptiWand Hard®,
OptiCase® & OptiAide are disposable products.
We suggest replacing after 30 Days if used daily.
To clean use soft soap, rinse thoroughly and air dry. Not dishwasher tested.
Please DO NOT USE any OptiWand® if you are allergic to Liquid Silicone Rubber!
OptiWand®, OptiWand Pincher®, OptiWand Bullseye®, OptiWand Hard® & OptiCase®
are registered trademarks of TJSC Optix Inc.
No claim is made to the exclusive right to use
the following part from the mark as shown: “Hard”
No claim is made to the exclusive right to use
the following part from the mark as shown: “Pincher”
All rights reserved.
Patent No. Des. D791,858S
Patent No. Des. D806,387S
Patent No . Des. D898,814 S
| Brand: | OptiWand |
|---|---|
| Isin: | INBHXLHHK2QV |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
OptiWand Single - Colors Vary between Blue or Green
OptiWand is made of SOFT PLIABLE RUBBER &
Is a Soft Contact Lens Insertion & Removal Tool.
APPLYING EYE DROPS PRIOR TO INSERTION IS A MUST FOR THIS TO WORK PROPERLY!! It helps transfer the lens from wand to eye and vice versa much easier.
It can be used to INSERT ALL CONTACT LENSES.
It WILL remove soft contact lenses with some practice & patience by PINCHING THEM WITH THE SOFT ENDS!
****************
IT IS NOT A SUCTION CUP FOR SOFT LENSES
We strongly recommend starting with insertion as it should be easier to perfect
Removal's pinch can be tricky but once mastered it is super simple
Practice and patience are a must and old habits must be broken in order to use it properly
Soft contact lenses are NOT a SOLID material and CANNOT be grabbed by placing the OptiWand against them
You must break the bond between contact lens & your CORNEA where your lenses sit securely as designed
IT WILL NOT Remove RGP/Hard/Sclera lenses
The Split Cup side will insert Sclera lenses and either side will insert RGP
*It has an EMERGENCY BLINK RELEASE TO PREVENT STICKING TO NAKED EYE *
For proper insertion you must focus on the CENTER HOLE and not a mirror or other source.
The soft contact LENS WILL NOT come off the OptiWand unless it is placed properly directly on the cornea.
If you are bringing it in at an angle the contact lens will stay on the OptiWand and not come off on to the eye as intended.
Using OptiWand for inserting SOFT & HARD Contact Lenses
Step 1: Apply Eye Drops prior to use! Dip your OptiWand in Contact Lens solution for lubrication.
Step 2: Position your regular sized HARD or SOFT contact lens on the center of FULL CUP SIDE of the OptiWand. If you have small soft eyes or hard lenses you can use the SPLIT CUP end and use the following steps. The OptiWand is designed to hold the lens during insertion.
Step 3: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 4: Draw the OptiWandto your eye by looking DIRECTLY AT THE LENS through the CENTER HOLE to align properly.
*Aiming the OptiWand at a colored background or light will help some to focus on the CENTER HOLE*
Step 5: Once it is close enough and the contact lens touches your eye, give the OptiWand a slight TWIST to help release the lens.
Step 6: Blink your contact into place.
Now your lens is centered on your eye.
* Make sure to hold eyelashes away to prevent blockage. *
WARNING **NEVER USEOptiWandON NAKED EYE**
Please DO NOT USE the OptiWand if you are allergic to Liquid Silicone Rubber!
Using OptiWand for Removing SOFT Contact Lenses
YOU CAN USE THE FULL CUP OR SPLIT CUP TO PINCH SOFT LENSES.
SPLIT CUP END IS BEST IF YOU HAVE SMALL EYES OR LENSES.
FULL CUP END IS BEST FOR LARGER FINGERS OR LONG FINGERNAILS.
Step 1: Apply Eye Drops prior to use! We suggest using a DRY OptiWand for Soft Contact Lens removal for best results.
Step 2: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 3: Focusing through the CENTER HOLE, draw the OptiWand to your eye until you touch the soft contact lens.
Step 4: Once you feel theOptiWandtouch the soft contact lens you should twist it slightly then carefully pinch the soft contact lens with the Base of theOptiWandand swipe away from eye. Some users can turn the OptiWand towards their noses after it makes contact and that will help push it out.
*Best pinching position is very close to the tip*
Final Step: DipOptiWandinto contact lens solution in current case and the lens will fall down into the solution with a pinch on the Full cup.
We suggest placing the soft lens on your non dominant index finger and PRACTICE THE PINCH OFF OF YOUR FINGER to get a feel for actual removal.
If you pinch the soft contact lens off of a finger a few times you will be able to visualize what it takes to pinch effectively.
Using OptiWand for inserting Large Sclera contact lenses
Step 1: Dip your OptiWand SPLIT CUP SIDE in Contact Lens solution for lubrication
Step 2: Stand the OptiWand up on the counter or table top with the Split cup side up
Step 3: Position your Sclera contact lens on the center of the SPLIT CUP SIDE of the OptiWand
Step 4: Look & stay focused on the CENTER HOLE for proper alignment.
* Some prefer to have a colored background to help focus on the CENTER HOLE *
Step 5: Spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 6: Slowly draw to the OptiWand until the contact lens makes contact with the eye.
Step 7: Blink until comfortable
USE ONLY AS DIRECTED!
These statements have not been evaluated by the Food and Drug Administration.
This product is not intended to diagnose, treat, cure, or prevent any disease.
Please read and follow instructions as well as view the instructional videos for best results.
OptiWand®, OptiWand Pincher®, OptiWand Bullseye®, OptiWand Hard®,
OptiCase® & OptiAide are disposable products.
We suggest replacing after 30 Days if used daily.
To clean use soft soap, rinse thoroughly and air dry. Not dishwasher tested.
Please DO NOT USE any OptiWand® if you are allergic to Liquid Silicone Rubber!
OptiWand®, OptiWand Pincher®, OptiWand Bullseye®, OptiWand Hard® & OptiCase®
are registered trademarks of TJSC Optix Inc.
No claim is made to the exclusive right to use
the following part from the mark as shown: “Hard”
No claim is made to the exclusive right to use
the following part from the mark as shown: “Pincher”
All rights reserved.
Patent No. Des. D791,858S
Patent No. Des. D806,387S
Patent No . Des. D898,814 S
Item Specifics
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.