munirater Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
munirater Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
munirater Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
Allroo-us
|
|
|
||||||
|
|
|
|
|
|||
Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
Product Overview:
Drives camshaft bearings smoothly
One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks.
Range of 1.1 25" to 2.69" (28.58 - 68.3mm). Easy on bearings.
The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
Includes:
1 X Driver Bar
1 X Extension
1 X Expander Assembly
1 X Guide Cone
1 X 1-1/4" Washer
5 X Collet Sets. Each includes 2 sets of rubber sleeves
1 X Storage case
What kind of bearings do I need for a camshaft?
When installing cam bearings, always work your way from the rear of the block forward.
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance,
since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
Installation of cam bearings into the block must be done carefully to
avoid shaving material from the outside diameter of the bearings.
This can easily cause a buildup of excess material between the bearing and the block’s bearing bore,
which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
The installation process begins after you’ve accomplished any machining that might be needed
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.).
Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on,
the right tool is a camshaft bearing installer. Sometimes called a bearing knocker,
these tools let you tap the bearings into (or out of) the bores with your favorite hammer.
universal camshaft bearing installation tools are used to remove and
install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks.
They take the difficulty out of bearing replacement and drive camshaft bearings smoothly.
The expansion sleeves grip firmly and are easy on new bearings.
The expander and the split driving plates have replaceable rubber sleeves.
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below.
Place the expanding driver onto the expander assembly.
Be sure to line up each of the segments of the driver with the separa-
tions on the expander assembly. Lubricate the smooth side of the rubber sleeve to help with putting the driver on the expander
2. Next place the nylon centering cone over the driving shaft.
Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
be needed for removal of the rear bearings.
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing.
4. Center the cone in first bearing housing and drive bearing out.
Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven.
Repeat the
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
| Item Specifics | |
|---|---|
| Warranty | 1 Year |
| Brand | munirater |
| Manufacturer Part Number | Does Not Apply |
| Type | Engine Tool |
| Range | 1.1 25" to 2.69" (28.58 - 68.3mm) |
| Material | Carbon steel |
| Modified Item | No |
Payment
We support multiple payment methods.
Shipping
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
We have CA, NJ warehouses and ship items may vary according to the stock.
Returns
30 Days easy returns satisfaction grantee.
Items to be returned must be in original factory condition.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Allroo-us
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
Product Overview: Drives camshaft bearings smoothly One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.1 25" to 2.69" (28.58 - 68.3mm). Easy on bearings. The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
Includes: 1 X Driver Bar
What kind of bearings do I need for a camshaft?
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance, since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
avoid shaving material from the outside diameter of the bearings. This can easily cause a buildup of excess material between the bearing and the block’s bearing bore, which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.). Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on, the right tool is a camshaft bearing installer. Sometimes called a bearing knocker, these tools let you tap the bearings into (or out of) the bores with your favorite hammer. universal camshaft bearing installation tools are used to remove and install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks. They take the difficulty out of bearing replacement and drive camshaft bearings smoothly. The expansion sleeves grip firmly and are easy on new bearings. The expander and the split driving plates have replaceable rubber sleeves.
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below. Place the expanding driver onto the expander assembly. Be sure to line up each of the segments of the driver with the separa-
2. Next place the nylon centering cone over the driving shaft. Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing. 4. Center the cone in first bearing housing and drive bearing out. Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven. Repeat the
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
All rights reserved. |
||||||||||||||
On May 29, 2025 at 12:15:25 PDT, seller added the following information:
| Brand: | munirater |
|---|---|
| Isin: | IW7LOD6G9FVG |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Allroo-us
|
|
||||||
|
|
|
|
|||
Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
Product Overview:
Drives camshaft bearings smoothly
One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks.
Range of 1.1 25" to 2.69" (28.58 - 68.3mm). Easy on bearings.
The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
Includes:
1 X Driver Bar
1 X Extension
1 X Expander Assembly
1 X Guide Cone
1 X 1-1/4" Washer
5 X Collet Sets. Each includes 2 sets of rubber sleeves
1 X Storage case
What kind of bearings do I need for a camshaft?
When installing cam bearings, always work your way from the rear of the block forward.
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance,
since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
Installation of cam bearings into the block must be done carefully to
avoid shaving material from the outside diameter of the bearings.
This can easily cause a buildup of excess material between the bearing and the block’s bearing bore,
which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
The installation process begins after you’ve accomplished any machining that might be needed
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.).
Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on,
the right tool is a camshaft bearing installer. Sometimes called a bearing knocker,
these tools let you tap the bearings into (or out of) the bores with your favorite hammer.
universal camshaft bearing installation tools are used to remove and
install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks.
They take the difficulty out of bearing replacement and drive camshaft bearings smoothly.
The expansion sleeves grip firmly and are easy on new bearings.
The expander and the split driving plates have replaceable rubber sleeves.
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below.
Place the expanding driver onto the expander assembly.
Be sure to line up each of the segments of the driver with the separa-
tions on the expander assembly. Lubricate the smooth side of the rubber sleeve to help with putting the driver on the expander
2. Next place the nylon centering cone over the driving shaft.
Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
be needed for removal of the rear bearings.
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing.
4. Center the cone in first bearing housing and drive bearing out.
Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven.
Repeat the
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
| Item Specifics | |
|---|---|
| Warranty | 1 Year |
| Brand | munirater |
| Manufacturer Part Number | Does Not Apply |
| Type | Engine Tool |
| Range | 1.1 25" to 2.69" (28.58 - 68.3mm) |
| Material | Carbon steel |
| Modified Item | No |
Payment
We support multiple payment methods.
Shipping
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
We have CA, NJ warehouses and ship items may vary according to the stock.
Returns
30 Days easy returns satisfaction grantee.
Items to be returned must be in original factory condition.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Allroo-us
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Hot Item
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Universal Engine Camshaft Cam Bearing Installation Insert and Removal Tool Kit
Product Overview: Drives camshaft bearings smoothly One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.1 25" to 2.69" (28.58 - 68.3mm). Easy on bearings. The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
Includes: 1 X Driver Bar
What kind of bearings do I need for a camshaft?
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance, since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
avoid shaving material from the outside diameter of the bearings. This can easily cause a buildup of excess material between the bearing and the block’s bearing bore, which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.). Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on, the right tool is a camshaft bearing installer. Sometimes called a bearing knocker, these tools let you tap the bearings into (or out of) the bores with your favorite hammer. universal camshaft bearing installation tools are used to remove and install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks. They take the difficulty out of bearing replacement and drive camshaft bearings smoothly. The expansion sleeves grip firmly and are easy on new bearings. The expander and the split driving plates have replaceable rubber sleeves.
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below. Place the expanding driver onto the expander assembly. Be sure to line up each of the segments of the driver with the separa-
2. Next place the nylon centering cone over the driving shaft. Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing. 4. Center the cone in first bearing housing and drive bearing out. Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven. Repeat the
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
On May 29, 2025 at 12:15:25 PDT, seller added the following information:
- Warranty: 1 Year
- Brand: munirater
- Manufacturer Part Number: Does Not Apply
- Type: Engine Tool
- UPC: Does not apply
- Range: 1.1 25" to 2.69" (28.58 - 68.3mm)
- Material: Carbon steel
- Modified Item: No
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.