Skip to main content

Longs Motor Stepper motor driver DM420A,1.7A,12

Brand: Longs Motor

Stepper motor driver DM420A,1.7A,12-36VDC,128Micostep Bipolar , CNC New

This item includes:

Stepper motor driver DM420A,1.7A,12-36VDC,128Micostep Bipolar , CNC New


Introduction: 



    DM420A  is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 12VDC to 36VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM420A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
l  High performance, low price
l  Average current control, 2-phase sinusoidal output current drive
l  Supply voltage from 12VDC to 36VDC
l  Opto-isolated signal I/O
l  Overvoltage, under voltage, overcorrect, phase short circuit protection
l  8 channels subdivision and automatic idle-current reduction
l  8 channels output phase current setting
l  Offline command input terminal
l  Motor torque is related with speed, but not related with step/revolution
l  High start speed
l  High hording torque under high speed
Electrical specification:

Input voltage12-36VDC
Input current< 2A
Output current0.44A- 2.83A
ConsumptionConsumption:40W; 
Temperature
Working Temperature -10~45?;
Stocking temperature -40?~70?
HumidityNot condensation, no water droplets
gasProhibition of combustible gases and conductive dust
weight70G

Pins assignments and description:
 
1)   Connector Pins  Configurations
Pin Function                Details                                                          
PUL +,PUL-
Pulse signal, PUL+ is the positive end of pulses  input pin
                  PUL- is the negative end of pulse  input pin
 
DIR+,DIR-
DIR signal: DIR+ is the positive end of direction input pin
                 DIR- is the negative end of direction input pin
ENBL+
 
Enable signal:  ENBL+ is the positive end of direction input pin. This signal is used for enabling/disabling the driver. High level for enabling the driver and low level for disabling the driver.
ENBL-ENBL- is the negative end of direction input pin. Usually left unconnected (enabled)
 
2) Pins wiring diagram:
PC’s control signals can be active in high and low electrical level. When the high electrical level is active,
all control negative signals will be connected together to GND. When low electrical level is active, all
control positive signals will be connected together to public port. Now give two examples(Open collector
&PNP), please check them:
 
 
                     Fig 1. Input port circuit (Positive connection)
                            PC open connector output
 
Note: When VCC=5V, R=0
        When VCC=12V, R=1K, >1/8W
       When VCC=24V, R=2K,>1/8W
R must connect in the control signal part .
 
 
3.Function choice ( Using DIP pins to achieve this function)
 
1) Micro step resolution is set by SW 5,6,7,8 of the DIP switch as shown in the following table:
 
SW5
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SW6
ON
ON
OFF
OFF
ON
ON
OFF
OFF
SW7
ON
ON
ON
ON
OFF
OFF
OFF
OFF
Pulse/rev
200
400
800
1600
3200
6400
12800
25600
Micro
1
2
4
8
16
32
64
128
 
 
 
 
 
 
 
2) Standstill current setting
SW4 is used for this purpose. OFF meaning that the standstill current is set to be half of the
selected dynamic current and ON meaning that standstill is set to be the same as the selected
dynamic current.
 
3) Output current setting:
The first three bits (SW 1, 2, 3)of the DIP switch are used to set the dynamic current. Select
a setting
 
Closest to your motor’s required current 
SW1SW2SW3PEAKRMS
ONONON0.44 A0.31 A
OFFONON0.62 A0.44 A
ONOFFON0.74 A0.52 A
OFFOFFON0.86 A0.61 A
ONONOFF1.46 A1.03 A
OFFONOFF1.69 A1.20 A
ONOFFOFF2.14 A1.51 A
OFFOFFOFF2.83 A2.00 A
 
4) Semi-flow  function:
Semi-flow function is that there is not step pulse after200 ms, the driver output current
automatically reduced to 40% of rated output current, which is used to prevent motor heat.
 
 
4. Pins of motor & power:
 
Motor and power pins
1
A+
Motors wiring
 
2
A-
3
B+
4
B-
5,6
DC+ DC-
Power supply
Power supply :DC12-36VDC
The peak input current cannot be up to 2A






Brand: Longs Motor
Isin: IG6WWFEK9M9I

$113.85

$114.20
0% off
  • Free shipping in US
  • Arrives:

  • Free 30-Day returns

In Stock

Sold by , Fulfilled by IBSPOT
Ships from USA

IBspot Buyer Protection

Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

GUARANTEED SAFE CHECKOUT

More seller options

Starting from

Compare all sellers
  • MONEY BACK GUARANTEE

    30 days money back guarantee, no additional fee charged.

  • EXCELLENT SUPPORT

    We provide 24/7 online customer support via email.

  • Fast Shipping

    One week domestic shipping. Global delivery to the US in 2 weeks.

scroll to top arrow
Longs Motor Stepper motor driver DM420A,1.7A,12

Longs Motor Stepper motor driver DM420A,1.7A,12

$113.85 $114.20 (0% off)


Stepper motor driver DM420A,1.7A,12-36VDC,128Micostep Bipolar , CNC New

This item includes:

Stepper motor driver DM420A,1.7A,12-36VDC,128Micostep Bipolar , CNC New


Introduction: 



    DM420A  is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 12VDC to 36VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM420A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
l  High performance, low price
l  Average current control, 2-phase sinusoidal output current drive
l  Supply voltage from 12VDC to 36VDC
l  Opto-isolated signal I/O
l  Overvoltage, under voltage, overcorrect, phase short circuit protection
l  8 channels subdivision and automatic idle-current reduction
l  8 channels output phase current setting
l  Offline command input terminal
l  Motor torque is related with speed, but not related with step/revolution
l  High start speed
l  High hording torque under high speed
Electrical specification:

Input voltage12-36VDC
Input current< 2A
Output current0.44A- 2.83A
ConsumptionConsumption:40W; 
Temperature
Working Temperature -10~45?;
Stocking temperature -40?~70?
HumidityNot condensation, no water droplets
gasProhibition of combustible gases and conductive dust
weight70G

Pins assignments and description:
 
1)   Connector Pins  Configurations
Pin Function                Details                                                          
PUL +,PUL-
Pulse signal, PUL+ is the positive end of pulses  input pin
                  PUL- is the negative end of pulse  input pin
 
DIR+,DIR-
DIR signal: DIR+ is the positive end of direction input pin
                 DIR- is the negative end of direction input pin
ENBL+
 
Enable signal:  ENBL+ is the positive end of direction input pin. This signal is used for enabling/disabling the driver. High level for enabling the driver and low level for disabling the driver.
ENBL-ENBL- is the negative end of direction input pin. Usually left unconnected (enabled)
 
2) Pins wiring diagram:
PC’s control signals can be active in high and low electrical level. When the high electrical level is active,
all control negative signals will be connected together to GND. When low electrical level is active, all
control positive signals will be connected together to public port. Now give two examples(Open collector
&PNP), please check them:
 
 
                     Fig 1. Input port circuit (Positive connection)
                            PC open connector output

 
Note: When VCC=5V, R=0
        When VCC=12V, R=1K, >1/8W
       When VCC=24V, R=2K,>1/8W
R must connect in the control signal part .
 
 
3.Function choice ( Using DIP pins to achieve this function)
 
1) Micro step resolution is set by SW 5,6,7,8 of the DIP switch as shown in the following table:
 
SW5
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SW6
ON
ON
OFF
OFF
ON
ON
OFF
OFF
SW7
ON
ON
ON
ON
OFF
OFF
OFF
OFF
Pulse/rev
200
400
800
1600
3200
6400
12800
25600
Micro
1
2
4
8
16
32
64
128
 
 
 
 
 
 
 
2) Standstill current setting
SW4 is used for this purpose. OFF meaning that the standstill current is set to be half of the
selected dynamic current and ON meaning that standstill is set to be the same as the selected
dynamic current.
 
3) Output current setting:
The first three bits (SW 1, 2, 3)of the DIP switch are used to set the dynamic current. Select
a setting
 
Closest to your motor’s required current 
SW1SW2SW3PEAKRMS
ONONON0.44 A0.31 A
OFFONON0.62 A0.44 A
ONOFFON0.74 A0.52 A
OFFOFFON0.86 A0.61 A
ONONOFF1.46 A1.03 A
OFFONOFF1.69 A1.20 A
ONOFFOFF2.14 A1.51 A
OFFOFFOFF2.83 A2.00 A
 
4) Semi-flow  function:
Semi-flow function is that there is not step pulse after200 ms, the driver output current
automatically reduced to 40% of rated output current, which is used to prevent motor heat.
 
 
4. Pins of motor & power:
 
Motor and power pins
1
A+
Motors wiring
 
2
A-
3
B+
4
B-
5,6
DC+ DC-
Power supply
Power supply :DC12-36VDC
The peak input current cannot be up to 2A






DataCaciques
  • Brand: Longs Motor
  • Run Method: Bipolar
  • Output Current: 0.44-2.83A(PEAK)
  • Model: Nema23
  • Driver microste: 256 microstep
  • MPN: 608506884601
  • Input Voltage: 12-36VDC
  • Country/Region of Manufacture: China
  • Application: Single Axis

 

Processing Time

  • We process and ship orders Monday through Friday, excluding holidays.
  • Most orders are processed within 1–3 business days, depending on product availability.
  • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

Shipping Coverage

We currently ship to addresses within the United States only.

Products may ship from:

  • Our U.S. warehouses, or
  • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

Each product page clearly displays the “Ships From” location before checkout.


Shipping Methods & Estimated Delivery

 

Shipping Method Estimated Delivery Cost
Free Shipping (US) 5–10 business days Free, available on eligible items
Standard Shipping (US to US by Item) 5–10 business days $6.50 for the first item, $2.00 each additional
Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
Extended Delivery (Ships from Overseas Warehouse) 10–20 business days $14.50 for the first item, $2.00 each additional

Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

Free Shipping

We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 


Carriers

We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.


Import Duties & Taxes

All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.


Tracking & Notifications

Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

You can track your shipment anytime using the Track Your Order page on our website.


Order Changes & Cancellations

If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

Contact: support@ibspot.com


Item Not Received

If your tracking number shows “Delivered” but you haven’t received your package:

  1. Check with your local USPS or UPS office.
  2. Confirm that the shipping address provided was correct.
  3. If the issue remains unresolved, contact support@ibspot.com for assistance.

Damaged or Lost Parcels

If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.


Customer Support

For any questions about shipping, tracking, or delivery, our customer support team is here to help.

Email: support@ibspot.com

We’re always happy to help.

Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.


Order Cancellation Policy

Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

How to Request a Cancellation

You can contact us through:

Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.


Return Policy

We accept returns for most items within 30 days of delivery for a full refund.

To be eligible for a return:

  • The item must be unused, in the same condition as received, and in its original packaging.
  • A tracking number must be provided to confirm the return shipment.

Non-Returnable Items

Certain products cannot be returned, including:

  • Perishable goods (for example, food, flowers, newspapers, magazines)
  • Intimate or sanitary goods
  • Hazardous materials or flammable liquids/gases
  • Gift cards
  • Downloadable software
  • Some health and personal care items

Partial Refunds (If Applicable)

Partial refunds may be granted in specific situations, such as:

  • Books with obvious signs of use
  • Opened CDs, DVDs, software, or vinyl records
  • Items not in their original condition, damaged, or missing parts not due to our error
  • Items returned more than 30 days after delivery

How to Return an Item

To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.


Shipping Cost for Returns

Please contact us before returning any item.
We will provide a free return shipping label.

If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.


Refund Processing

Once your return is received and inspected:

  • In-store returns are refunded to the original form of payment or issued as a gift card.
  • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

Please allow:

  • 5–7 business days for the return to reach our Returns Center.
  • An additional 3–10 business days for your bank to post the refund to your account.

Damages, Issues & Claims

Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.

Product Claims

Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.


Exchanges

We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.


Return Address

IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States


Customer Support

Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

Email: support@ibspot.com
Contact Form: Contact Us page

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Subscribe To Our Newsletter

Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.