Holybro Kakute F4 AIO V2 Flight Controller Atlatl HV V2 VTX Tekko32 35A ESC Combo Set
Holybro Kakute F4 AIO V2 Flight Controller Atlatl HV V2 VTX Tekko32 35A ESC Combo Set
Holybro Kakute F4 AIO V2 Flight Controller Atlatl HV V2 VTX Tekko32 35A ESC Combo Set
1、Compatible with major FPV receivers for Fatshark / ImmersionRC 2、Supports the standard 40-channel set: band A, B, E, for Fatshark and Raceband 3、Telemetry input allows remote control by the flight controller (when supported). Change channel, transmit power from Betaflight OSD, flight controller USB port, Taranis, etc. 4、Variable transmit power from 25mW to 600mW, use 25mW for competition, then easily switch to 600mW for freestyle 5、Pit Mode allows you to power up safely without the risk of other pilots knocking from the air
| Isin: | IYN6UZXKEPPJ |
|---|
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
1、Compatible with major FPV receivers for Fatshark / ImmersionRC 2、Supports the standard 40-channel set: band A, B, E, for Fatshark and Raceband 3、Telemetry input allows remote control by the flight controller (when supported). Change channel, transmit power from Betaflight OSD, flight controller USB port, Taranis, etc. 4、Variable transmit power from 25mW to 600mW, use 25mW for competition, then easily switch to 600mW for freestyle 5、Pit Mode allows you to power up safely without the risk of other pilots knocking from the air
More Information
Holybro Atlatl HV 5.8g 40CH Raceband VTX Features:
1. Compatible with major FPV receivers for Fatshark / ImmersionRC.
2. Supports the standard 40-channel set: band A, B, E, for Fatshark and Raceband.
3. Telemetry input allows remote control by the flight controller (when supported). Change channel, transmit power from Betaflight OSD, flight controller USB port, Taranis, etc.
4. Variable transmit power from 25mW to 600mW, use 25mW for competition, then easily switch to 600mW for freestyle.
5. Pit Mode allows you to power up safely without the risk of other pilots knocking from the air.
6. Mono audio input allows you to install a microphone, so you can listen to your motor while flying, no matter how far it flies.
7. Standard 36mm form factor allows you to mount Atlatl directly on the flight controller stack.
Holybro Kakute F4 AIO All in One V2 Features:
1. Additional UART (UART 4) added to support serial camera communication.
2. Additional UART (UART 5) added to support ESC telemetry such as from BLHeli_32 and KISS.
3. Through-hole solder pad instead of flat pad for more secure soldering especially for beginners.
4. Barometer sensor on board allows altitude hold mode.
5. I2C pad is available for certain external sensors.
6. Support for Betaflight and Cleanflight
7. Betaflight OSD.
8. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
9. Built-in soft-mounting. The IMU ("gyro") chip on this board is mounted on vibration-isolating foam.
10. High-performance / low-noise / high sensitivity IMU.
11. ICM20689 with 6-axle gyro and accelerometer.
12. It can run at up to 32kHz.
13. 2oz. copper PCB allows maximum 120A continuous current.
14. Dedicated bootloader button for easy firmware flashing.
15. Thin design is suitable for very compact frames.
19. Supports ESC BLHeli pass-through for easy upgrade and configuration.
Holybro Tekko32 35A BLHeli_32 ESC Features:
Unlike current ESCs, the Tekko32 ESC has a lot of space for development and wide compatibility with future product.
One of the best functions of the Tekko32 35A ESC is the automatic timing function. It (basically) is designed to provide the pilot with the smoothest and most efficient flight experience, which is the dream of a freestyle pilot! What can the increased MCU speed do?
First, it can run input signal with lower latency at a faster rate.
Dshot reach up to at least Dshot1200, now supports speed of at least 32kHz.
Second, it allows for more functions to be packed / as with up to 48KHz programmable pwm frequency, which allows the motor to run more smoothly and also moves small but potentially disturbing hump in the throttle response. All ESCs have these bumps, and BLHeli_32 can now be moved within rpm to the place where the system is less sensitive to them.
Like a programmable brake on a stopping force. This allows to control the braking of fixed-wing props, just like the improved direction change in the two-way mode.
Specification:
Condition: 100% Brand New
Item Type: RC Accessory
Material: Composite Material
Color: As Shown in the Picture
Weight: Approx. 109g
Holybro Atlatl HV 5.8G 40CH Raceband VTX:
Transmitting Output Power: 15mW ( Pit Mode), 25mW/ 100mW/ 200mW/ 400mW/ 600mW Switchable
Audio: 6MHz + 6.5MHz Mono
Antenna Connector: MMCX
Dimension: 35 * 35 * 7mm / 1.38 * 1.38 * 0.28inch
Mounting Hole: 30.5 * 30.5mm / 1.2 * 1.2inch
Net Weight: 10.8g
Holybro Kakute F4 AIO All in One V2:
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 (SPI)
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5 hardware UARTS (UART1, 3, 4, 5, 6)
Supports serial receivers (for SBUS / iBus / Spektrum / Crossfire). PPM and PWM receivers are not supported
128 Mbit Dataflash chip for Blackbox logging
Size: Approx. 35 * 43 * 7mm / 1.38 * 1.69 * 0.28inch (including USB in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 7g
Tekko32 35A ESC:
Lipo Input: 2-6S
Size: Approx. 15 * 30mm / 0.59 * 1.18inch
Net Weight: 5.2g
32-bit compatible ESC (Blheli_32)
Dshot1200 up to 32kHz
Compact and lightweight
Automatic timing function
Onboard RGB LED
Built-in current sensor
Smooth response
Compatible with Betaflight F3 / F4 Flight Controller
Package List:
1 * Kakute F4 AIO + Atlatl Stack
1 * Heatsink
1 * 80mm SMA-MMCX Cable
1 * 150mm 4pin JST GH Wire
4 * Tekko32 35A ESC
4 * 26AWG 100mm Black Wire
4 * 26AWG 100mm White Wire
4 * 26AWG 100mm Blue Wire
4 * 18AWG 100mm Red Wire
4 * 18AWG 100mm Black Wire
1. Compatible with major FPV receivers for Fatshark / ImmersionRC.
2. Supports the standard 40-channel set: band A, B, E, for Fatshark and Raceband.
3. Telemetry input allows remote control by the flight controller (when supported). Change channel, transmit power from Betaflight OSD, flight controller USB port, Taranis, etc.
4. Variable transmit power from 25mW to 600mW, use 25mW for competition, then easily switch to 600mW for freestyle.
5. Pit Mode allows you to power up safely without the risk of other pilots knocking from the air.
6. Mono audio input allows you to install a microphone, so you can listen to your motor while flying, no matter how far it flies.
7. Standard 36mm form factor allows you to mount Atlatl directly on the flight controller stack.
Holybro Kakute F4 AIO All in One V2 Features:
1. Additional UART (UART 4) added to support serial camera communication.
2. Additional UART (UART 5) added to support ESC telemetry such as from BLHeli_32 and KISS.
3. Through-hole solder pad instead of flat pad for more secure soldering especially for beginners.
4. Barometer sensor on board allows altitude hold mode.
5. I2C pad is available for certain external sensors.
6. Support for Betaflight and Cleanflight
7. Betaflight OSD.
8. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
9. Built-in soft-mounting. The IMU ("gyro") chip on this board is mounted on vibration-isolating foam.
10. High-performance / low-noise / high sensitivity IMU.
11. ICM20689 with 6-axle gyro and accelerometer.
12. It can run at up to 32kHz.
13. 2oz. copper PCB allows maximum 120A continuous current.
14. Dedicated bootloader button for easy firmware flashing.
15. Thin design is suitable for very compact frames.
19. Supports ESC BLHeli pass-through for easy upgrade and configuration.
Holybro Tekko32 35A BLHeli_32 ESC Features:
Unlike current ESCs, the Tekko32 ESC has a lot of space for development and wide compatibility with future product.
One of the best functions of the Tekko32 35A ESC is the automatic timing function. It (basically) is designed to provide the pilot with the smoothest and most efficient flight experience, which is the dream of a freestyle pilot! What can the increased MCU speed do?
First, it can run input signal with lower latency at a faster rate.
Dshot reach up to at least Dshot1200, now supports speed of at least 32kHz.
Second, it allows for more functions to be packed / as with up to 48KHz programmable pwm frequency, which allows the motor to run more smoothly and also moves small but potentially disturbing hump in the throttle response. All ESCs have these bumps, and BLHeli_32 can now be moved within rpm to the place where the system is less sensitive to them.
Like a programmable brake on a stopping force. This allows to control the braking of fixed-wing props, just like the improved direction change in the two-way mode.
Specification:
Condition: 100% Brand New
Item Type: RC Accessory
Material: Composite Material
Color: As Shown in the Picture
Weight: Approx. 109g
Holybro Atlatl HV 5.8G 40CH Raceband VTX:
Transmitting Output Power: 15mW ( Pit Mode), 25mW/ 100mW/ 200mW/ 400mW/ 600mW Switchable
Audio: 6MHz + 6.5MHz Mono
Antenna Connector: MMCX
Dimension: 35 * 35 * 7mm / 1.38 * 1.38 * 0.28inch
Mounting Hole: 30.5 * 30.5mm / 1.2 * 1.2inch
Net Weight: 10.8g
Holybro Kakute F4 AIO All in One V2:
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 (SPI)
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5 hardware UARTS (UART1, 3, 4, 5, 6)
Supports serial receivers (for SBUS / iBus / Spektrum / Crossfire). PPM and PWM receivers are not supported
128 Mbit Dataflash chip for Blackbox logging
Size: Approx. 35 * 43 * 7mm / 1.38 * 1.69 * 0.28inch (including USB in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 7g
Tekko32 35A ESC:
Lipo Input: 2-6S
Size: Approx. 15 * 30mm / 0.59 * 1.18inch
Net Weight: 5.2g
32-bit compatible ESC (Blheli_32)
Dshot1200 up to 32kHz
Compact and lightweight
Automatic timing function
Onboard RGB LED
Built-in current sensor
Smooth response
Compatible with Betaflight F3 / F4 Flight Controller
Package List:
1 * Kakute F4 AIO + Atlatl Stack
1 * Heatsink
1 * 80mm SMA-MMCX Cable
1 * 150mm 4pin JST GH Wire
4 * Tekko32 35A ESC
4 * 26AWG 100mm Black Wire
4 * 26AWG 100mm White Wire
4 * 26AWG 100mm Blue Wire
4 * 18AWG 100mm Red Wire
4 * 18AWG 100mm Black Wire
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.