Fuel_Kingparts For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
Fuel_Kingparts For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
Fuel_Kingparts For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
|
|
|
|
|
|
|
For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
The Function of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following signs with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline:
Please Note the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A)
Disconnect the ground (negative) cable of the battery and ensure that it does not accidentally spark while working.
Picture(B)
Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(C)
Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail intermittently.
Picture(D)
There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected.
Picture(E)
Locate and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(F)
Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(G)
Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the repair.
Picture(H)
Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise.
Picture(I)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(J)
Remove the fuel pump from the tank.
table#Attrid1288332 {border-collapse:separate} table#Attrid1288332 tr:last-child td:last-child{border-bottom-right-radius: 10px;} table#Attrid1288332 tr:last-child td:first-child{border-bottom-left-radius: 10px;} table#Attrid1288332 tr:nth-of-type(1n){} table#Attrid1288332 tr:nth-of-type(2n){} table#Attrid1288332 td{padding: 3px;} table#Attrid1288332{font-size:12px !important;font-family:Arial !important;color:#4c4c4c !important;text-align:left !important;} table#Attrid1288332 td:first-child{font-weight: 900; !important;;padding:3px;border:1px none ;} #m_pre1288332{border:1px none ;overflow: hidden;border-radius: 10px;}
| Item Specifics | |
|---|---|
| Type | Fuel Pump |
| Drive Type | Electrical |
| Placement on Vehicle | Fuel Tank |
| Inlet Type | Strainer |
| Fuel Type | Gasoline |
| Condition | New |
| Voltage | 12V |
| Float Included | Yes |
| OE/OEM Part Number | FG1722 |
| Interchange Part Number | SP4112M |
| Manufacturer Part Number | KING17007105FB |
| Custom Bundle | No |
| Manufacturer Warranty | 3 Years |
| Brand | Fuel_Kingparts |
| Mounting Hardware Included | No |
| Fitment Type | Direct Replacement |
| Modified Item | No |
Payment
We only accept payment through PayPal.
Shipping
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
Any question, please contact us by email on working days.
Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Terms & Contact Payment Policy Shipping Policy Return Policy FAQ About Us |
For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
The Function of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system. However,the fuel pump have a limited life.If you notice any of the following signs with your car: (1).Engine Sputtering at High Speeds (2).Decreased Fuel Pressure (3).Losing Power when the Vehicle is under Stress (4).Inability to accelerate (5).Decreasing Gas Mileage (6).Engine Not Starting This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline: Please Note the following before replacing the fuel pump: 1.Ensure that you are in a well ventilated and level work area. 2.Use approved safety glasses or goggles when working on any motor vehicle. 3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline. Picture(A) Disconnect the ground (negative) cable of the battery and ensure that it does not accidentally spark while working. Picture(B) Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler neck. Picture(C) Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail intermittently. Picture(D) There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected. Picture(E) Locate and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come out. Picture(F) Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank. Picture(G) Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the repair. Picture(H) Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise. Picture(I) Picture(J) Remove the fuel pump from the tank. table#Attrid1288336 {border-collapse:separate} table#Attrid1288336 tr:last-child td:last-child{border-bottom-right-radius: 5px;} table#Attrid1288336 tr:last-child td:first-child{border-bottom-left-radius: 5px;} table#Attrid1288336 tr:nth-of-type(1n){padding: 5px!important;background:#ffffff;} table#Attrid1288336 tr:nth-of-type(2n){padding: 5px!important;background:#f7fffb;} table#Attrid1288336 td div{padding: 5px;text-align:;} table#Attrid1288336 {font-family:Arial !important;font-size:16px !important;color:#000000 !important;text-align:left !important;} table#Attrid1288336 td:first-child{} table#Attrid1288336 td{padding:12px;border:1px solid #000000;}
We only accept payment through PayPal. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days. All of our brand new items come with a 60-Days money-back guarantee. Any question, please contact us by email on working days. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||
| Brand: | Fuel_Kingparts |
|---|---|
| Isin: | IYSR6O9TQFUN |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
|
|
|
|
|
|
For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
The Function of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following signs with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline:
Please Note the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A)
Disconnect the ground (negative) cable of the battery and ensure that it does not accidentally spark while working.
Picture(B)
Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(C)
Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail intermittently.
Picture(D)
There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected.
Picture(E)
Locate and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(F)
Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(G)
Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the repair.
Picture(H)
Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise.
Picture(I)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(J)
Remove the fuel pump from the tank.
table#Attrid1288332 {border-collapse:separate} table#Attrid1288332 tr:last-child td:last-child{border-bottom-right-radius: 10px;} table#Attrid1288332 tr:last-child td:first-child{border-bottom-left-radius: 10px;} table#Attrid1288332 tr:nth-of-type(1n){} table#Attrid1288332 tr:nth-of-type(2n){} table#Attrid1288332 td{padding: 3px;} table#Attrid1288332{font-size:12px !important;font-family:Arial !important;color:#4c4c4c !important;text-align:left !important;} table#Attrid1288332 td:first-child{font-weight: 900; !important;;padding:3px;border:1px none ;} #m_pre1288332{border:1px none ;overflow: hidden;border-radius: 10px;}
| Item Specifics | |
|---|---|
| Type | Fuel Pump |
| Drive Type | Electrical |
| Placement on Vehicle | Fuel Tank |
| Inlet Type | Strainer |
| Fuel Type | Gasoline |
| Condition | New |
| Voltage | 12V |
| Float Included | Yes |
| OE/OEM Part Number | FG1722 |
| Interchange Part Number | SP4112M |
| Manufacturer Part Number | KING17007105FB |
| Custom Bundle | No |
| Manufacturer Warranty | 3 Years |
| Brand | Fuel_Kingparts |
| Mounting Hardware Included | No |
| Fitment Type | Direct Replacement |
| Modified Item | No |
Payment
We only accept payment through PayPal.
Shipping
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
Any question, please contact us by email on working days.
Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Best Sales
Newly Listed
Terms & Contact Payment Policy Shipping Policy Return Policy FAQ About Us |
For 2009 2008 2007 2006 Land Rover Range Rover 4.4L Electric Fuel Pump Assembly
The Function of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system. However,the fuel pump have a limited life.If you notice any of the following signs with your car: (1).Engine Sputtering at High Speeds (2).Decreased Fuel Pressure (3).Losing Power when the Vehicle is under Stress (4).Inability to accelerate (5).Decreasing Gas Mileage (6).Engine Not Starting This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline: Please Note the following before replacing the fuel pump: 1.Ensure that you are in a well ventilated and level work area. 2.Use approved safety glasses or goggles when working on any motor vehicle. 3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A) Disconnect the ground (negative) cable of the battery and ensure that it does not accidentally spark while working. Picture(B) Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(C) Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail intermittently.
Picture(D) There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected. Picture(E) Locate and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(F) Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank. Picture(G) Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the repair.
Picture(H) Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise. Picture(I) Picture(J) Remove the fuel pump from the tank. table#Attrid1288336 {border-collapse:separate} table#Attrid1288336 tr:last-child td:last-child{border-bottom-right-radius: 5px;} table#Attrid1288336 tr:last-child td:first-child{border-bottom-left-radius: 5px;} table#Attrid1288336 tr:nth-of-type(1n){padding: 5px!important;background:#ffffff;} table#Attrid1288336 tr:nth-of-type(2n){padding: 5px!important;background:#f7fffb;} table#Attrid1288336 td div{padding: 5px;text-align:;} table#Attrid1288336 {font-family:Arial !important;font-size:16px !important;color:#000000 !important;text-align:left !important;} table#Attrid1288336 td:first-child{} table#Attrid1288336 td{padding:12px;border:1px solid #000000;}
We only accept payment through PayPal. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days. All of our brand new items come with a 60-Days money-back guarantee. Any question, please contact us by email on working days. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- Type: Fuel Pump
- Drive Type: Electrical
- Placement on Vehicle: Fuel Tank
- Inlet Type: Strainer
- Fuel Type: Gasoline
- Voltage: 12V
- Float Included: Yes
- OE/OEM Part Number: FG1722
- Interchange Part Number: SP4112M
- Manufacturer Part Number: KING17007105FB
- Custom Bundle: No
- Manufacturer Warranty: 3 Years
- Brand: Fuel_Kingparts
- Mounting Hardware Included: No
- Fitment Type: Direct Replacement
- Modified Item: No
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.