Skip to main content

Fitting_Partszone For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side CV Axle Assembly

  • Brand New CV Axle Assembly
  •  Provides extensive coverage of bearings for a broad range of automotive and heavy-duty 4x4 wheel applications. direct fit and made from high quality materials to meet orginal specifications Built to last - temperature and pressure resistant grease prevents friction and wear Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.
  • For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side CV Axle Assembly

    Brand New CV Axle Assembly


    Provides extensive coverage of bearings for a broad range of automotive and heavy-duty 4x4 wheel applications.
    direct fit and made from high quality materials to meet orginal specifications
    Built to last - temperature and pressure resistant grease prevents friction and wear
    Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
    When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.

    Axles should always be replaced in pairs (Passenger and Driver). This reduces the overall time required to replace two axles at different times.

     

     

    Professional Installation is Highly Recommended.

     

    CV Axle Installation

     

    1. Compare the new CV axle to the old CV axle to ensure both are the same design.
    2. Slide the inboard end of the axle into position inside the transaxle. Be careful not to damage the output seal in the process.
    3. Push the inboard end of the axle into the transaxle until the retaining ring snaps into place. If you can’t push the axle into place by hand, you may need to use a dead blow hammer on the outboard end of the axle to tap the axle into position.
    4. Make sure the axle is fully seated and flush with the transaxle. Double-check that the axle is seated properly by grasping the portion closest to the transaxle and pulling it outward. The CV axle should remain firmly in place.

     

    Note: Do not pull on the shaft portion of the axle or the axle’s boots.

     

    1. Slide the outboard end of the axle into the hub.
    2. Slide the ball joint stud into the steering knuckle.    
    3. Reinstall the hub nut loosely by hand. Do not tighten the hub nut down at this time.
    4. Install the castle nut on the ball joint stud. Use a torque wrench to tighten the castle nut to the manufacturer’s specification.
    5.  Install a new cotter pin into the castle nut.
    6. Reinstall the wheel/tire assembly on the lug nuts.
    7. Tighten the lug nuts until they’re snug using a ratchet and socket.
    8. Safely remove the jack stands and lower the vehicle.
    9. Use a torque wrench to tighten the lug nuts to the manufacturer’s specification.
    10. Use a torque wrench to tighten the hub nut to the manufacturer’s specification.
    11. Reinstall the hub cap or center cap onto the wheel.
    12. Check the transmission fluid level and top it off as needed.

     

     

    How Long Can You Drive on a Bad CV Axle?

     

    Even though you may be able to get away with driving a vehicle with a bad CV axle for some time, you don't want to take any chances. A broken CV joint can cause the front steering and suspension system to collapse, resulting in a dangerous loss of steering control.

     

     

    Get the Right CV Axle Assembly to Restore Your Vehicle 

     

    CV axle assemblies are critical transmission components because they transfer rotational force to the drive wheels. When they wear out, your vehicle will create ticking noises, excessive vibrations, and knocking sounds. You need to replace this component because it can cause other problems that can result in more expensive repairs. Good thing Fitting_Partszone makes it easy to get a new axle assembly. 

    Here at Fitting_Partszone, we have a wide selection of CV axles from the leading aftermarket brands that have high-quality standards. You can be confident in the fit and performance of our axles, as they’re made with the original specifications of your vehicle. You can enjoy our efficient and swift delivery process.

    So don’t wait around and get your vehicle back on the road as soon as possible. Order a replacement axle assembly or axle shaft at Fitting_Partszone today.


    Item Specifics
    Manufacturer Part Number FT845138PZ309
    Brand Fitting_Partszone
    Type Car & Truck CV Axle Assembly
    Manufacturer Warranty 2 Years
    Product Condition Brand New
    OE/OEM Part Number 66-5410
    Interchange Part Number 4342006810
    Other Part Number 4342006811
    Location Front Left
    Quantity 1
    Packaging Type Box
    Package Included 1x CV Axle Assembly
    Special Note Please check if the "Notes" in Compatibility match your vehicle.
    Fitment Type Direct Replacement
    Inboard Joint Type Female
    Outboard Joint Type Conventional
    Outboard Shaft Connection Style Spline
    Surface Finish Heat Treatment
    Material Steel
    Vintage Car Part No
    Performance Part Yes
    Universal Fitment No
    Color As Shown

    Payment

    We can accept  Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card,and so on.Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    Shipping
    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    Returns
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    Contact Us
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Terms & Contact
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side CV Axle Assembly

    Brand New CV Axle Assembly


    Provides extensive coverage of bearings for a broad range of automotive and heavy-duty 4x4 wheel applications.
    direct fit and made from high quality materials to meet orginal specifications
    Built to last - temperature and pressure resistant grease prevents friction and wear
    Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
    When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.

    Axles should always be replaced in pairs (Passenger and Driver). This reduces the overall time required to replace two axles at different times.

     

     

    Professional Installation is Highly Recommended.

     

    CV Axle Installation

     

    1. Compare the new CV axle to the old CV axle to ensure both are the same design.
    2. Slide the inboard end of the axle into position inside the transaxle. Be careful not to damage the output seal in the process.
    3. Push the inboard end of the axle into the transaxle until the retaining ring snaps into place. If you can’t push the axle into place by hand, you may need to use a dead blow hammer on the outboard end of the axle to tap the axle into position.
    4. Make sure the axle is fully seated and flush with the transaxle. Double-check that the axle is seated properly by grasping the portion closest to the transaxle and pulling it outward. The CV axle should remain firmly in place.

     

    Note: Do not pull on the shaft portion of the axle or the axle’s boots.

     

    1. Slide the outboard end of the axle into the hub.
    2. Slide the ball joint stud into the steering knuckle.    
    3. Reinstall the hub nut loosely by hand. Do not tighten the hub nut down at this time.
    4. Install the castle nut on the ball joint stud. Use a torque wrench to tighten the castle nut to the manufacturer’s specification.
    5.  Install a new cotter pin into the castle nut.
    6. Reinstall the wheel/tire assembly on the lug nuts.
    7. Tighten the lug nuts until they’re snug using a ratchet and socket.
    8. Safely remove the jack stands and lower the vehicle.
    9. Use a torque wrench to tighten the lug nuts to the manufacturer’s specification.
    10. Use a torque wrench to tighten the hub nut to the manufacturer’s specification.
    11. Reinstall the hub cap or center cap onto the wheel.
    12. Check the transmission fluid level and top it off as needed.

     

     

    How Long Can You Drive on a Bad CV Axle?

     

    Even though you may be able to get away with driving a vehicle with a bad CV axle for some time, you don't want to take any chances. A broken CV joint can cause the front steering and suspension system to collapse, resulting in a dangerous loss of steering control.

     

     

    Get the Right CV Axle Assembly to Restore Your Vehicle 

     

    CV axle assemblies are critical transmission components because they transfer rotational force to the drive wheels. When they wear out, your vehicle will create ticking noises, excessive vibrations, and knocking sounds. You need to replace this component because it can cause other problems that can result in more expensive repairs. Good thing Fitting_Partszone makes it easy to get a new axle assembly. 

    Here at Fitting_Partszone, we have a wide selection of CV axles from the leading aftermarket brands that have high-quality standards. You can be confident in the fit and performance of our axles, as they’re made with the original specifications of your vehicle. You can enjoy our efficient and swift delivery process.

    So don’t wait around and get your vehicle back on the road as soon as possible. Order a replacement axle assembly or axle shaft at Fitting_Partszone today.

    Item Specifics
    Manufacturer Part Number :FT845138PZ309
    Brand :Fitting_Partszone
    Type :Car & Truck CV Axle Assembly
    Manufacturer Warranty :2 Years
    Product Condition :Brand New
    OE/OEM Part Number :66-5410
    Interchange Part Number :4342006810
    Other Part Number : 4342006811
    Location :Front Left
    Quantity :1
    Packaging Type :Box
    Package Included :1x CV Axle Assembly
    Special Note :Please check if the "Notes" in Compatibility match your vehicle.
    Fitment Type :Direct Replacement
    Inboard Joint Type :Female
    Outboard Joint Type :Conventional
    Outboard Shaft Connection Style :Spline
    Surface Finish :Heat Treatment
    Material :Steel
    Vintage Car Part :No
    Performance Part :Yes
    Universal Fitment :No
    Color :As Shown


    We can accept  Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card,and so on.Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    All rights reserved.







    Brand: Fitting_Partszone
    Isin: I1WNNULLUOHD

    $158.67

    • Free shipping in US
    • Arrives:

    • Free 30-Day returns

    In Stock

    Sold by , Fulfilled by IBSPOT
    Ships from USA

    IBspot Buyer Protection

    Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

    supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

    GUARANTEED SAFE CHECKOUT

    More seller options

    Starting from

    Compare all sellers
    • MONEY BACK GUARANTEE

      30 days money back guarantee, no additional fee charged.

    • EXCELLENT SUPPORT

      We provide 24/7 online customer support via email.

    • Fast Shipping

      One week domestic shipping. Global delivery to the US in 2 weeks.

    scroll to top arrow
    Fitting_Partszone For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side CV Axle Assembly

    Fitting_Partszone For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side...

    $158.67

  • Brand New CV Axle Assembly
  •  Provides extensive coverage of bearings for a broad range of automotive and heavy-duty 4x4 wheel applications. direct fit and made from high quality materials to meet orginal specifications Built to last - temperature and pressure resistant grease prevents friction and wear Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.
  • For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side CV Axle Assembly

    Brand New CV Axle Assembly


    Provides extensive coverage of bearings for a broad range of automotive and heavy-duty 4x4 wheel applications.
    direct fit and made from high quality materials to meet orginal specifications
    Built to last - temperature and pressure resistant grease prevents friction and wear
    Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
    When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.

    Axles should always be replaced in pairs (Passenger and Driver). This reduces the overall time required to replace two axles at different times.

     

     

    Professional Installation is Highly Recommended.

     

    CV Axle Installation

     

    1. Compare the new CV axle to the old CV axle to ensure both are the same design.
    2. Slide the inboard end of the axle into position inside the transaxle. Be careful not to damage the output seal in the process.
    3. Push the inboard end of the axle into the transaxle until the retaining ring snaps into place. If you can’t push the axle into place by hand, you may need to use a dead blow hammer on the outboard end of the axle to tap the axle into position.
    4. Make sure the axle is fully seated and flush with the transaxle. Double-check that the axle is seated properly by grasping the portion closest to the transaxle and pulling it outward. The CV axle should remain firmly in place.

     

    Note: Do not pull on the shaft portion of the axle or the axle’s boots.

     

    1. Slide the outboard end of the axle into the hub.
    2. Slide the ball joint stud into the steering knuckle.    
    3. Reinstall the hub nut loosely by hand. Do not tighten the hub nut down at this time.
    4. Install the castle nut on the ball joint stud. Use a torque wrench to tighten the castle nut to the manufacturer’s specification.
    5.  Install a new cotter pin into the castle nut.
    6. Reinstall the wheel/tire assembly on the lug nuts.
    7. Tighten the lug nuts until they’re snug using a ratchet and socket.
    8. Safely remove the jack stands and lower the vehicle.
    9. Use a torque wrench to tighten the lug nuts to the manufacturer’s specification.
    10. Use a torque wrench to tighten the hub nut to the manufacturer’s specification.
    11. Reinstall the hub cap or center cap onto the wheel.
    12. Check the transmission fluid level and top it off as needed.

     

     

    How Long Can You Drive on a Bad CV Axle?

     

    Even though you may be able to get away with driving a vehicle with a bad CV axle for some time, you don't want to take any chances. A broken CV joint can cause the front steering and suspension system to collapse, resulting in a dangerous loss of steering control.

     

     

    Get the Right CV Axle Assembly to Restore Your Vehicle 

     

    CV axle assemblies are critical transmission components because they transfer rotational force to the drive wheels. When they wear out, your vehicle will create ticking noises, excessive vibrations, and knocking sounds. You need to replace this component because it can cause other problems that can result in more expensive repairs. Good thing Fitting_Partszone makes it easy to get a new axle assembly. 

    Here at Fitting_Partszone, we have a wide selection of CV axles from the leading aftermarket brands that have high-quality standards. You can be confident in the fit and performance of our axles, as they’re made with the original specifications of your vehicle. You can enjoy our efficient and swift delivery process.

    So don’t wait around and get your vehicle back on the road as soon as possible. Order a replacement axle assembly or axle shaft at Fitting_Partszone today.


    Item Specifics
    Manufacturer Part Number FT845138PZ309
    Brand Fitting_Partszone
    Type Car & Truck CV Axle Assembly
    Manufacturer Warranty 2 Years
    Product Condition Brand New
    OE/OEM Part Number 66-5410
    Interchange Part Number 4342006810
    Other Part Number 4342006811
    Location Front Left
    Quantity 1
    Packaging Type Box
    Package Included 1x CV Axle Assembly
    Special Note Please check if the "Notes" in Compatibility match your vehicle.
    Fitment Type Direct Replacement
    Inboard Joint Type Female
    Outboard Joint Type Conventional
    Outboard Shaft Connection Style Spline
    Surface Finish Heat Treatment
    Material Steel
    Vintage Car Part No
    Performance Part Yes
    Universal Fitment No
    Color As Shown

    Payment

    We can accept  Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card,and so on.Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    Shipping
    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    Returns
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    Contact Us
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Terms & Contact
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Toyota Camry 2012-2014 2016-2017 2.5L Front Driver Side CV Axle Assembly

    Brand New CV Axle Assembly


    Provides extensive coverage of bearings for a broad range of automotive and heavy-duty 4x4 wheel applications.
    direct fit and made from high quality materials to meet orginal specifications
    Built to last - temperature and pressure resistant grease prevents friction and wear
    Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
    When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.

    Axles should always be replaced in pairs (Passenger and Driver). This reduces the overall time required to replace two axles at different times.

     

     

    Professional Installation is Highly Recommended.

     

    CV Axle Installation

     

    1. Compare the new CV axle to the old CV axle to ensure both are the same design.
    2. Slide the inboard end of the axle into position inside the transaxle. Be careful not to damage the output seal in the process.
    3. Push the inboard end of the axle into the transaxle until the retaining ring snaps into place. If you can’t push the axle into place by hand, you may need to use a dead blow hammer on the outboard end of the axle to tap the axle into position.
    4. Make sure the axle is fully seated and flush with the transaxle. Double-check that the axle is seated properly by grasping the portion closest to the transaxle and pulling it outward. The CV axle should remain firmly in place.

     

    Note: Do not pull on the shaft portion of the axle or the axle’s boots.

     

    1. Slide the outboard end of the axle into the hub.
    2. Slide the ball joint stud into the steering knuckle.    
    3. Reinstall the hub nut loosely by hand. Do not tighten the hub nut down at this time.
    4. Install the castle nut on the ball joint stud. Use a torque wrench to tighten the castle nut to the manufacturer’s specification.
    5.  Install a new cotter pin into the castle nut.
    6. Reinstall the wheel/tire assembly on the lug nuts.
    7. Tighten the lug nuts until they’re snug using a ratchet and socket.
    8. Safely remove the jack stands and lower the vehicle.
    9. Use a torque wrench to tighten the lug nuts to the manufacturer’s specification.
    10. Use a torque wrench to tighten the hub nut to the manufacturer’s specification.
    11. Reinstall the hub cap or center cap onto the wheel.
    12. Check the transmission fluid level and top it off as needed.

     

     

    How Long Can You Drive on a Bad CV Axle?

     

    Even though you may be able to get away with driving a vehicle with a bad CV axle for some time, you don't want to take any chances. A broken CV joint can cause the front steering and suspension system to collapse, resulting in a dangerous loss of steering control.

     

     

    Get the Right CV Axle Assembly to Restore Your Vehicle 

     

    CV axle assemblies are critical transmission components because they transfer rotational force to the drive wheels. When they wear out, your vehicle will create ticking noises, excessive vibrations, and knocking sounds. You need to replace this component because it can cause other problems that can result in more expensive repairs. Good thing Fitting_Partszone makes it easy to get a new axle assembly. 

    Here at Fitting_Partszone, we have a wide selection of CV axles from the leading aftermarket brands that have high-quality standards. You can be confident in the fit and performance of our axles, as they’re made with the original specifications of your vehicle. You can enjoy our efficient and swift delivery process.

    So don’t wait around and get your vehicle back on the road as soon as possible. Order a replacement axle assembly or axle shaft at Fitting_Partszone today.

    Item Specifics
    Manufacturer Part Number :FT845138PZ309
    Brand :Fitting_Partszone
    Type :Car & Truck CV Axle Assembly
    Manufacturer Warranty :2 Years
    Product Condition :Brand New
    OE/OEM Part Number :66-5410
    Interchange Part Number :4342006810
    Other Part Number : 4342006811
    Location :Front Left
    Quantity :1
    Packaging Type :Box
    Package Included :1x CV Axle Assembly
    Special Note :Please check if the "Notes" in Compatibility match your vehicle.
    Fitment Type :Direct Replacement
    Inboard Joint Type :Female
    Outboard Joint Type :Conventional
    Outboard Shaft Connection Style :Spline
    Surface Finish :Heat Treatment
    Material :Steel
    Vintage Car Part :No
    Performance Part :Yes
    Universal Fitment :No
    Color :As Shown


    We can accept  Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card,and so on.Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    All rights reserved.







    • Manufacturer Part Number: FT845138PZ309
    • Brand: Fitting_Partszone
    • UPC: Does not apply
    • Type: Car & Truck CV Axle Assembly
    • Manufacturer Warranty: 2 Years
    • OE/OEM Part Number: 66-5410
    • Interchange Part Number: 4342006810
    • Other Part Number: 4342006811
    • Location: Front Left
    • Quantity: 1
    • Packaging Type: Box
    • Package Included: 1x CV Axle Assembly
    • Special Note: Please check if the "Notes" in Compatibility match your vehicle.
    • Fitment Type: Direct Replacement
    • Inboard Joint Type: Female
    • Outboard Joint Type: Conventional
    • Outboard Shaft Connection Style: Spline
    • Surface Finish: Heat Treatment
    • Material: Steel
    • Vintage Part: No
    • Performance Part: Yes
    • Universal Fitment: No
    • Color: As Shown

     

    Processing Time

    • We process and ship orders Monday through Friday, excluding holidays.
    • Most orders are processed within 1–3 business days, depending on product availability.
    • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

    Shipping Coverage

    We currently ship to addresses within the United States only.

    Products may ship from:

    • Our U.S. warehouses, or
    • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

    Each product page clearly displays the “Ships From” location before checkout.


    Shipping Methods & Estimated Delivery

     

    Shipping Method Estimated Delivery Cost
    Free Shipping (US) 5–10 business days Free, available on eligible items
    Standard Shipping (US to US by Item) 5–10 business days $6.50 for the first item, $3.00 each additional
    Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
    Extended Delivery (Ships from Overseas Warehouse) 10–15 business days $14.50 for the first item, $4.00 each additional

    Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

    Free Shipping

    We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 


    Carriers

    We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.


    Import Duties & Taxes

    All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.


    Tracking & Notifications

    Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

    You can track your shipment anytime using the Track Your Order page on our website.


    Order Changes & Cancellations

    If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

    Contact: support@ibspot.com


    Item Not Received

    If your tracking number shows “Delivered” but you haven’t received your package:

    1. Check with your local USPS or UPS office.
    2. Confirm that the shipping address provided was correct.
    3. If the issue remains unresolved, contact support@ibspot.com for assistance.

    Damaged or Lost Parcels

    If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.


    Customer Support

    For any questions about shipping, tracking, or delivery, our customer support team is here to help.

    Email: support@ibspot.com

    We’re always happy to help.

    Please read our policy carefully before making a purchase.
    We aim to ensure every customer has a smooth and transparent experience with ibspot.com.


    Order Cancellation Policy

    Customers may request to cancel an order before it has been shipped.
    Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

    How to Request a Cancellation

    You can contact us through:

    Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.


    Return Policy

    We accept returns for most items within 30 days of delivery for a full refund.

    To be eligible for a return:

    • The item must be unused, in the same condition as received, and in its original packaging.

    • A tracking number must be provided to confirm the return shipment.

    Non-Returnable Items

    Certain products cannot be returned, including:

    • Perishable goods (for example, food, flowers, newspapers, magazines)

    • Intimate or sanitary goods

    • Hazardous materials or flammable liquids/gases

    • Gift cards

    • Downloadable software

    • Some health and personal care items

    Partial Refunds (If Applicable)

    Partial refunds may be granted in specific situations, such as:

    • Books with obvious signs of use

    • Opened CDs, DVDs, software, or vinyl records

    • Items not in their original condition, damaged, or missing parts not due to our error

    • Items returned more than 30 days after delivery


    How to Return an Item

    To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
    Our team will provide you with return instructions and a prepaid return label.


    Shipping Cost for Returns

    Please contact us before returning any item.
    We will provide a free return shipping label.

    If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

    For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
    We cannot guarantee that we will receive your returned item if shipped independently.


    Refund Processing

    Once your return is received and inspected:

    • In-store returns are refunded to the original form of payment or issued as a gift card.

    • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

    Please allow:

    • 5–7 business days for the return to reach our Returns Center.

    • An additional 3–10 business days for your bank to post the refund to your account.


    Damages, Issues & Claims

    Please inspect your order immediately upon receipt.
    If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
    We’ll evaluate the issue promptly and make it right.

    Product Claims

    Before purchasing, please review product details carefully.
    If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.


    Exchanges

    We do not process direct exchanges.
    The fastest way to get what you need is to return the original item and place a new order once your return is accepted.


    Return Address

    IBSPOT Return Center
    15 Sawmill Ln
    Dover Plains, NY 12522
    United States


    Customer Support

    Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

    Email: support@ibspot.com
    Contact Form: Contact Us page

    Oops!

    Sorry, it looks like some products are not available in selected quantity.

    OK

    Subscribe To Our Newsletter

    Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.