Eagle Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
Eagle Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
Eagle Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
- Keeps Check Engine Light Off for Emissions Codes - OE style high-technology washcoat and optimal precious metal load deliver required reduction in tailpipe emission to match vehicle application
- Direct-Fit Design - Bolt-on replacement solution with OE-style routings for easy installation that doesn't require fabrication or welding
- Doesn't Require Break-In - Ready to operate with application-specific converter shell design and mat compression
|
|
|
||||||
|
|
|
|
|
|||
Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
Features & Benefits:
- Keeps Check Engine Light Off for Emissions Codes - OE style high-technology washcoat and optimal precious metal load deliver required reduction in tailpipe emission to match vehicle application
- Direct-Fit Design - Bolt-on replacement solution with OE-style routings for easy installation that doesn't require fabrication or welding
- Doesn't Require Break-In - Ready to operate with application-specific converter shell design and mat compression
- Strong and Durable – Stainless-steel body with aluminized pipe and heat shields for durability
Why Catalytic Converters Are Necessary?
With almost perfect efficiency at cleaning up harmful gases from the air, catalytic converters are one of the most significant factors of why we have much cleaner air than we did nearly 50 years ago. Some enthusiasts are still under the notion that converters sap performance, but the truth is that modern converters offer virtually zero flow restriction. It’s cleaner and carries a minimal performance penalty. Without converters, our air would be much harder to breathe.
Generally speaking, catalytic converters should be good for at least 100,000 miles, if not more. Modern onboard computer systems in cars can monitor catalytic converter performance and alert you when it has finally reached the end of its service life.
Description:
The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment.
If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases.
However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it.
All in all, the high quality catalytic converter with high quality materials and precision tools. What's more, the product is covered with 5-year limited warranty.
NOTE: BeFore placing the order, please check year and model according your vehicle. So you will get a catalytic converter perfect fitting For your car. And professional installation is suggested.
• EPA Approved.
EPA approved For all Federal and CaliFornia compliant vehicles, including Low Emission Vehicles* in all states excluding CaliFornia.
Not legal For sale in CaliFornia. If your vehicle is registered in CaliFornia, do not purchase this part. If your vehicle meets CaliFornia requirements,
but is not registered in CaliFornia, this converter will work on your vehicle.
• No engine light problems,Can pass EPA inspection
• 5 years or 50,000 miles limited warranty
Specification:
Other Part Number: 16065 22642 13041 5191 40234 40366 22642 099-3672 F23A1 F23A5
Package:
Front 6 Bolt T409
Stainless Steel
Catalytic Converter Bolts Gasket
Tube material:Aluminized Steel
Dimensions:16in. overall length
Substrate Material: Ceramic
Inlet Diameter: 1.85 inch
Outlet Diameter: 2.04 inch
Overall Length: 15.7 inch
Body Diameter: 4.49 inch
Body Length: 5 inch
Certification: EPA
Location:Middle
Material:Stainless Steel
Converter Substrate Material: Ceramic
CPSI: 400cells
Product fit:Direct Fit
Fitment:
for Honda Accord LX / EX / SE / DX 1998 - 2002 -- 2.3L F23A1 / F23A5 I4 Engine
Testing
Check for exhaust leaks. Once you've installed a new catalytic converter, one thing you'll want to do immediately is double-check to make sure there aren't any leaks in the exhaust system on either side of it. Depending on where it is, an exhaust leak can cause a variety of problems for your vehicle, including reduced fuel efficiency and long-term damage.
- There are several ways to find an exhaust leak. One is to simply be observant while you drive — if your car sounds louder than normal when it runs or seems to "rumble" more, you may have a leak.You can also check for leaks by jacking your car up, starting it in park, and carefully moving a lit candle along the length of the exhaust tubing. Leaks which are invisible to the eye should cause the flame to waver or blow out.
?
Measure back-pressure in the exhaust system. One problem that can occur in faulty catalytic converters is that they can become "backed up" with soot, debris, and other exhaust byproducts or broken apart inside the converter. In this case, the engine's ability to rid itself of exhaust is hampered, which can cause a vehicle's fuel efficiency to plummet and can even cause the engine to stall in severe cases.[6] Luckily, performing a backpressure test is simple — just screw a pressure gauge into the oxygen sensor's hole before the converter in the exhaust manifold in most vehicles. The pressure reading should be less than 1.25 psi when the vehicle's engine is running at 2,000 RPMs.
- The worse the congestion is, the higher the pressure reading can be. Very bad backpressure readings can approach 3 psi.
Perform a mallet test for old converters. If your car's converter is old and worn, one simple test can tell whether it needs to be replaced very quickly. Simply grab a rubber mallet (or similar tool) and give the converter a firm hit. If you hear any sort of rattling, your converter needs to be replaced — this indicates that the metallic catalyst within has begun to corrode and crumble.
- However, if you don't hear a rattle, this doesn't necessarily mean that your converter works well. There may still be other problems with it. To be clear, this test can only tell you if you have a bad converter, not if you have a good one.
?
Consider more advanced tests. Catalytic converters can be tricky parts — if you're in doubt about whether or not yours is functioning properly even after performing the tests above, don't hesitate to take it to a mechanic or specialist. These professionals will have access to the type of equipment that can be used to perform more advanced tests, like delta temperature tests, oxygen storage tests, and CO2 tests.
- Most auto shops that offer smog testing will be able to perform these sorts of emissions tests.
?
| Item Specifics | |
|---|---|
| Brand | Eagle |
| Type | Catalytic Converter |
| Placement on Vehicle | Exhaust |
| Labels & Certifications | EPA |
| Features | 100% Accuracy of Fit |
| Manufacturer Part Number | EA169647LD |
| OE/OEM Part Number | 16065 22642 |
| Items Included | As Picture Shows |
| Manufacturer Warranty | 5 Years |
| Country/Region of Manufacture | Unknown |
| Body Material | Aluminum oxide |
| Insulation material | Asbestos Fiber Felt |
| Performance Part | Yes |
| Universal Fitment | No |
| Vintage Part | Yes |
| Oxygen Sensor Location | Pre & Post Catalyst |
| Finish | Coated |
| Body Width | 4.125 in. |
| Body Height | 4.125 in. |
| Body Length | 8 in. |
| Features 2 | Bolt-on Connection |
| Interchange Part Number | 13041 5191 F23A1 F23A5 |
| Item Weight | 5.15kg |
| Outlet Diameter | 2.375 In. |
| Superseded Part Number | 40234 40366 22642 099-3672 |
| California Prop 65 Warning | Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
| Body Shape | Round |
| Air Tube Count | No |
| Converter Quantity | 1 |
| Inlet Type | 4 Bolt Welded Flange |
| Outlet Type | Pipe Connection |
| California Certified | No |
| Substrate Material | Ceramic |
| Mounting Hardware Included | No |
| Outlet Quantity | 1 |
| Property | The most important external purification device |
| Thermal stability | up to standard |
| Color | Silver |
| Conversion rate | 99% |
Payment
Payment must be received within 10 days as auction ended or order might be delayed.
Shipping
If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
Return shipping is to be paid by the Seller.
Contact Us
Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.
Feedback
Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Shop Category Excellent Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
Features & Benefits:
Why Catalytic Converters Are Necessary?
With almost perfect efficiency at cleaning up harmful gases from the air, catalytic converters are one of the most significant factors of why we have much cleaner air than we did nearly 50 years ago. Some enthusiasts are still under the notion that converters sap performance, but the truth is that modern converters offer virtually zero flow restriction. It’s cleaner and carries a minimal performance penalty. Without converters, our air would be much harder to breathe.
Generally speaking, catalytic converters should be good for at least 100,000 miles, if not more. Modern onboard computer systems in cars can monitor catalytic converter performance and alert you when it has finally reached the end of its service life.
Description:
The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment.
If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases.
However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it.
All in all, the high quality catalytic converter with high quality materials and precision tools. What's more, the product is covered with 5-year limited warranty.
NOTE: BeFore placing the order, please check year and model according your vehicle. So you will get a catalytic converter perfect fitting For your car. And professional installation is suggested.
• EPA Approved.
EPA approved For all Federal and CaliFornia compliant vehicles, including Low Emission Vehicles* in all states excluding CaliFornia.
Not legal For sale in CaliFornia. If your vehicle is registered in CaliFornia, do not purchase this part. If your vehicle meets CaliFornia requirements,
but is not registered in CaliFornia, this converter will work on your vehicle.
• No engine light problems,Can pass EPA inspection
• 5 years or 50,000 miles limited warranty
Specification:
Other Part Number: 16065 22642 13041 5191 40234 40366 22642 099-3672 F23A1 F23A5
Package:
Front 6 Bolt T409 Stainless Steel Catalytic Converter Bolts Gasket Tube material:Aluminized Steel Dimensions:16in. overall length Substrate Material: Ceramic Inlet Diameter: 1.85 inch Outlet Diameter: 2.04 inch Overall Length: 15.7 inch Body Diameter: 4.49 inch Body Length: 5 inch Certification: EPA Location:Middle Material:Stainless Steel Converter Substrate Material: Ceramic CPSI: 400cells Product fit:Direct Fit
Fitment:
for Honda Accord LX / EX / SE / DX 1998 - 2002 -- 2.3L F23A1 / F23A5 I4 Engine Testing
Check for exhaust leaks. Once you've installed a new catalytic converter, one thing you'll want to do immediately is double-check to make sure there aren't any leaks in the exhaust system on either side of it. Depending on where it is, an exhaust leak can cause a variety of problems for your vehicle, including reduced fuel efficiency and long-term damage.
? Measure back-pressure in the exhaust system. One problem that can occur in faulty catalytic converters is that they can become "backed up" with soot, debris, and other exhaust byproducts or broken apart inside the converter. In this case, the engine's ability to rid itself of exhaust is hampered, which can cause a vehicle's fuel efficiency to plummet and can even cause the engine to stall in severe cases.[6] Luckily, performing a backpressure test is simple — just screw a pressure gauge into the oxygen sensor's hole before the converter in the exhaust manifold in most vehicles. The pressure reading should be less than 1.25 psi when the vehicle's engine is running at 2,000 RPMs.
Perform a mallet test for old converters. If your car's converter is old and worn, one simple test can tell whether it needs to be replaced very quickly. Simply grab a rubber mallet (or similar tool) and give the converter a firm hit. If you hear any sort of rattling, your converter needs to be replaced — this indicates that the metallic catalyst within has begun to corrode and crumble.
?
Consider more advanced tests. Catalytic converters can be tricky parts — if you're in doubt about whether or not yours is functioning properly even after performing the tests above, don't hesitate to take it to a mechanic or specialist. These professionals will have access to the type of equipment that can be used to perform more advanced tests, like delta temperature tests, oxygen storage tests, and CO2 tests.
? Payment must be received within 10 days as auction ended or order might be delayed. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Return shipping is to be paid by the Seller. Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours. Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved. |
| Brand: | Eagle |
|---|---|
| Isin: | IAWJHGGX9VNZ |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
- Keeps Check Engine Light Off for Emissions Codes - OE style high-technology washcoat and optimal precious metal load deliver required reduction in tailpipe emission to match vehicle application
- Direct-Fit Design - Bolt-on replacement solution with OE-style routings for easy installation that doesn't require fabrication or welding
- Doesn't Require Break-In - Ready to operate with application-specific converter shell design and mat compression
|
|
||||||
|
|
|
|
|||
Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
Features & Benefits:
- Keeps Check Engine Light Off for Emissions Codes - OE style high-technology washcoat and optimal precious metal load deliver required reduction in tailpipe emission to match vehicle application
- Direct-Fit Design - Bolt-on replacement solution with OE-style routings for easy installation that doesn't require fabrication or welding
- Doesn't Require Break-In - Ready to operate with application-specific converter shell design and mat compression
- Strong and Durable – Stainless-steel body with aluminized pipe and heat shields for durability
Why Catalytic Converters Are Necessary?
With almost perfect efficiency at cleaning up harmful gases from the air, catalytic converters are one of the most significant factors of why we have much cleaner air than we did nearly 50 years ago. Some enthusiasts are still under the notion that converters sap performance, but the truth is that modern converters offer virtually zero flow restriction. It’s cleaner and carries a minimal performance penalty. Without converters, our air would be much harder to breathe.
Generally speaking, catalytic converters should be good for at least 100,000 miles, if not more. Modern onboard computer systems in cars can monitor catalytic converter performance and alert you when it has finally reached the end of its service life.
Description:
The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment.
If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases.
However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it.
All in all, the high quality catalytic converter with high quality materials and precision tools. What's more, the product is covered with 5-year limited warranty.
NOTE: BeFore placing the order, please check year and model according your vehicle. So you will get a catalytic converter perfect fitting For your car. And professional installation is suggested.
• EPA Approved.
EPA approved For all Federal and CaliFornia compliant vehicles, including Low Emission Vehicles* in all states excluding CaliFornia.
Not legal For sale in CaliFornia. If your vehicle is registered in CaliFornia, do not purchase this part. If your vehicle meets CaliFornia requirements,
but is not registered in CaliFornia, this converter will work on your vehicle.
• No engine light problems,Can pass EPA inspection
• 5 years or 50,000 miles limited warranty
Specification:
Other Part Number: 16065 22642 13041 5191 40234 40366 22642 099-3672 F23A1 F23A5
Package:
Front 6 Bolt T409
Stainless Steel
Catalytic Converter Bolts Gasket
Tube material:Aluminized Steel
Dimensions:16in. overall length
Substrate Material: Ceramic
Inlet Diameter: 1.85 inch
Outlet Diameter: 2.04 inch
Overall Length: 15.7 inch
Body Diameter: 4.49 inch
Body Length: 5 inch
Certification: EPA
Location:Middle
Material:Stainless Steel
Converter Substrate Material: Ceramic
CPSI: 400cells
Product fit:Direct Fit
Fitment:
for Honda Accord LX / EX / SE / DX 1998 - 2002 -- 2.3L F23A1 / F23A5 I4 Engine
Testing
Check for exhaust leaks. Once you've installed a new catalytic converter, one thing you'll want to do immediately is double-check to make sure there aren't any leaks in the exhaust system on either side of it. Depending on where it is, an exhaust leak can cause a variety of problems for your vehicle, including reduced fuel efficiency and long-term damage.
- There are several ways to find an exhaust leak. One is to simply be observant while you drive — if your car sounds louder than normal when it runs or seems to "rumble" more, you may have a leak.You can also check for leaks by jacking your car up, starting it in park, and carefully moving a lit candle along the length of the exhaust tubing. Leaks which are invisible to the eye should cause the flame to waver or blow out.
?
Measure back-pressure in the exhaust system. One problem that can occur in faulty catalytic converters is that they can become "backed up" with soot, debris, and other exhaust byproducts or broken apart inside the converter. In this case, the engine's ability to rid itself of exhaust is hampered, which can cause a vehicle's fuel efficiency to plummet and can even cause the engine to stall in severe cases.[6] Luckily, performing a backpressure test is simple — just screw a pressure gauge into the oxygen sensor's hole before the converter in the exhaust manifold in most vehicles. The pressure reading should be less than 1.25 psi when the vehicle's engine is running at 2,000 RPMs.
- The worse the congestion is, the higher the pressure reading can be. Very bad backpressure readings can approach 3 psi.
Perform a mallet test for old converters. If your car's converter is old and worn, one simple test can tell whether it needs to be replaced very quickly. Simply grab a rubber mallet (or similar tool) and give the converter a firm hit. If you hear any sort of rattling, your converter needs to be replaced — this indicates that the metallic catalyst within has begun to corrode and crumble.
- However, if you don't hear a rattle, this doesn't necessarily mean that your converter works well. There may still be other problems with it. To be clear, this test can only tell you if you have a bad converter, not if you have a good one.
?
Consider more advanced tests. Catalytic converters can be tricky parts — if you're in doubt about whether or not yours is functioning properly even after performing the tests above, don't hesitate to take it to a mechanic or specialist. These professionals will have access to the type of equipment that can be used to perform more advanced tests, like delta temperature tests, oxygen storage tests, and CO2 tests.
- Most auto shops that offer smog testing will be able to perform these sorts of emissions tests.
?
| Item Specifics | |
|---|---|
| Brand | Eagle |
| Type | Catalytic Converter |
| Placement on Vehicle | Exhaust |
| Labels & Certifications | EPA |
| Features | 100% Accuracy of Fit |
| Manufacturer Part Number | EA169647LD |
| OE/OEM Part Number | 16065 22642 |
| Items Included | As Picture Shows |
| Manufacturer Warranty | 5 Years |
| Country/Region of Manufacture | Unknown |
| Body Material | Aluminum oxide |
| Insulation material | Asbestos Fiber Felt |
| Performance Part | Yes |
| Universal Fitment | No |
| Vintage Part | Yes |
| Oxygen Sensor Location | Pre & Post Catalyst |
| Finish | Coated |
| Body Width | 4.125 in. |
| Body Height | 4.125 in. |
| Body Length | 8 in. |
| Features 2 | Bolt-on Connection |
| Interchange Part Number | 13041 5191 F23A1 F23A5 |
| Item Weight | 5.15kg |
| Outlet Diameter | 2.375 In. |
| Superseded Part Number | 40234 40366 22642 099-3672 |
| California Prop 65 Warning | Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
| Body Shape | Round |
| Air Tube Count | No |
| Converter Quantity | 1 |
| Inlet Type | 4 Bolt Welded Flange |
| Outlet Type | Pipe Connection |
| California Certified | No |
| Substrate Material | Ceramic |
| Mounting Hardware Included | No |
| Outlet Quantity | 1 |
| Property | The most important external purification device |
| Thermal stability | up to standard |
| Color | Silver |
| Conversion rate | 99% |
Payment
Payment must be received within 10 days as auction ended or order might be delayed.
Shipping
If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
Return shipping is to be paid by the Seller.
Contact Us
Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.
Feedback
Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Shop Category Hot Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us New List Item
|
Manifold With Catalytic Converter For Honda Accord 2000 2001 2002 DX/EX Engine
Features & Benefits:
Why Catalytic Converters Are Necessary?
With almost perfect efficiency at cleaning up harmful gases from the air, catalytic converters are one of the most significant factors of why we have much cleaner air than we did nearly 50 years ago. Some enthusiasts are still under the notion that converters sap performance, but the truth is that modern converters offer virtually zero flow restriction. It’s cleaner and carries a minimal performance penalty. Without converters, our air would be much harder to breathe.
Generally speaking, catalytic converters should be good for at least 100,000 miles, if not more. Modern onboard computer systems in cars can monitor catalytic converter performance and alert you when it has finally reached the end of its service life.
Description:
The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment.
If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases.
However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it.
All in all, the high quality catalytic converter with high quality materials and precision tools. What's more, the product is covered with 5-year limited warranty.
NOTE: BeFore placing the order, please check year and model according your vehicle. So you will get a catalytic converter perfect fitting For your car. And professional installation is suggested.
• EPA Approved.
EPA approved For all Federal and CaliFornia compliant vehicles, including Low Emission Vehicles* in all states excluding CaliFornia.
Not legal For sale in CaliFornia. If your vehicle is registered in CaliFornia, do not purchase this part. If your vehicle meets CaliFornia requirements,
but is not registered in CaliFornia, this converter will work on your vehicle.
• No engine light problems,Can pass EPA inspection
• 5 years or 50,000 miles limited warranty
Specification:
Other Part Number: 16065 22642 13041 5191 40234 40366 22642 099-3672 F23A1 F23A5
Package:
Front 6 Bolt T409 Stainless Steel Catalytic Converter Bolts Gasket Tube material:Aluminized Steel Dimensions:16in. overall length Substrate Material: Ceramic Inlet Diameter: 1.85 inch Outlet Diameter: 2.04 inch Overall Length: 15.7 inch Body Diameter: 4.49 inch Body Length: 5 inch Certification: EPA Location:Middle Material:Stainless Steel Converter Substrate Material: Ceramic CPSI: 400cells Product fit:Direct Fit
Fitment:
for Honda Accord LX / EX / SE / DX 1998 - 2002 -- 2.3L F23A1 / F23A5 I4 Engine Testing
Check for exhaust leaks. Once you've installed a new catalytic converter, one thing you'll want to do immediately is double-check to make sure there aren't any leaks in the exhaust system on either side of it. Depending on where it is, an exhaust leak can cause a variety of problems for your vehicle, including reduced fuel efficiency and long-term damage.
? Measure back-pressure in the exhaust system. One problem that can occur in faulty catalytic converters is that they can become "backed up" with soot, debris, and other exhaust byproducts or broken apart inside the converter. In this case, the engine's ability to rid itself of exhaust is hampered, which can cause a vehicle's fuel efficiency to plummet and can even cause the engine to stall in severe cases.[6] Luckily, performing a backpressure test is simple — just screw a pressure gauge into the oxygen sensor's hole before the converter in the exhaust manifold in most vehicles. The pressure reading should be less than 1.25 psi when the vehicle's engine is running at 2,000 RPMs.
Perform a mallet test for old converters. If your car's converter is old and worn, one simple test can tell whether it needs to be replaced very quickly. Simply grab a rubber mallet (or similar tool) and give the converter a firm hit. If you hear any sort of rattling, your converter needs to be replaced — this indicates that the metallic catalyst within has begun to corrode and crumble.
?
Consider more advanced tests. Catalytic converters can be tricky parts — if you're in doubt about whether or not yours is functioning properly even after performing the tests above, don't hesitate to take it to a mechanic or specialist. These professionals will have access to the type of equipment that can be used to perform more advanced tests, like delta temperature tests, oxygen storage tests, and CO2 tests.
? Payment must be received within 10 days as auction ended or order might be delayed. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Return shipping is to be paid by the Seller. Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours. Positive Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved. |
- UPC: Does not apply
- Brand: Eagle
- Type: Catalytic Converter
- Placement on Vehicle: Exhaust
- Labels & Certifications: EPA
- Features: 100% Accuracy of Fit
- Manufacturer Part Number: EA169647LD
- OE/OEM Part Number: 16065 22642
- Items Included: As Picture Shows
- Manufacturer Warranty: 5 Years
- Country/Region of Manufacture: Unknown
- Body Material: Aluminum oxide
- Insulation material: Asbestos Fiber Felt
- Performance Part: Yes
- Universal Fitment: No
- Vintage Part: Yes
- Oxygen Sensor Location: Pre & Post Catalyst
- Finish: Coated
- Body Width: 4.125 in.
- Body Height: 4.125 in.
- Body Length: 8 in.
- Features 2: Bolt-on Connection
- Interchange Part Number: 13041 5191 F23A1 F23A5
- Item Weight: 5.15kg
- Outlet Diameter: 2.375 In.
- Superseded Part Number: 40234 40366 22642 099-3672
- California Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- Body Shape: Round
- Air Tube Count: No
- Converter Quantity: 1
- Inlet Type: 4 Bolt Welded Flange
- Outlet Type: Pipe Connection
- California Certified: No
- Substrate Material: Ceramic
- Mounting Hardware Included: No
- Outlet Quantity: 1
- Property: The most important external purification device
- Thermal stability: up to standard
- Color: Silver
- Conversion rate: 99%
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.