Difalco H.O. slot car controller, DD506, 30 band design for T-jet and Fray cars
Difalco H.O. slot car controller, DD506, 30 band design for T-jet and Fray cars
Difalco H.O. slot car controller, DD506, 30 band design for T-jet and Fray cars
Choose your handle color!!!!!!! Just add a message to your order or I can choose the color for you.
Clear,
Midnight
black, Cobalt blue, Red, Sky blue, Gray metallic, Silver metallic,
Lime, Orange crush, Extreme pink, Gold rush, Sage green, Plum crazy
purple, and Lemon yellow color handles
are available.
Difalco H.O. controllers are used by multiple time HOPRA National Champion Roger Porcelli. At the 2019 HOPRA Nationals Roger was Top Qualifier in Pro super stock, CM poly mod, Neo mod and Unlimited classes. Roger won the Super stock and CM poly mod classes, finished 3rd in Unlimited and T-jet and 4th place in Neo mod classes. His performance with his Difalco controller led to the Overall Grand Championship honor for 2019. This was Rogers 3rd time as Grand Champion, all with Difalco controllers!
Congratulations Roger from Difalco Design.
NEO H.O. CONTROLLERS
TECHNICAL HIGHLIGHTS
Computer designed and labeled circuit board. Wiper bands are nickel plated for durability.
Exclusive routed fiberglass frame is separate from the circuit board electronics. This allows for inexpensive upgrades in the future by simply replacing the circuit board.
Adjustable braking and sensitivity rheostats provide a wide adjustment range to match your car, track and driver characteristics for optimal racing performance.
"E"lectronic auto reset brake and power fuses with reverse diode protection for reliability.
High amp transistor design is virtually maintenance free.
Acu-Pivot trigger pin with trigger ball bearings are standard! Ball bearings keep the wiper button firmly in contact with the wiper bands with zero trigger side play even after years of racing.
Rounded wiper button for pinpoint selection of the correct wiper band and reduced friction.
All our designs can be serviced, repaired or upgraded by any racer. No returning to the factory, like other controllers! This is important if you want to avoid other manufacturers costly repair bills or if you are in another country.
Parma style handles are standard on all Difalco controllers. They are more comfortable to hold than that square handle brand! Do not be fooled by off brand handles that are flimsy and will flex in your hand and crack in a couple years!
Neo 1/32 controllers come standard with dual polarity.
GENESIS NEO CONTROLLERS
DD506: Neo HD30 controller. Standard slower response network is installed for T-jet and Fray type cars. Special 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats. $169.00
* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for most 1/32 cars. We have various optional networks available to tune your controller for high performance 1/32 motors or low voltage operation.
FEATURES TO THINK ABOUT BEFORE YOU BUY ANOTHER CONTROLLER
POWER:
*No inline fuses! We do not put a fuse on our main power lines. Not only does this add resistance to the power circuit it also means you are depending on a cheap fuse block to maintain contact with the fuse. If your ATC mini inline fuse blows your race will be over while you leave the track to replace it. We fuse our transistor outputs and brake line with electronic auto reset fuses that start working as soon as the short circuit is corrected.
*Our controller uses a simple terminal setup to switch between positive and negative polarity. Make sure you have this feature.
MECHANICAL:
*We use a ball bearing trigger with our special threaded trigger pin and adjustable locknut. They claim that their "specially designed pivot rivet provides a snug fit...eliminating the need for aftermarket bearings". I say bull. They use a standard Parma trigger pin. It not only has plenty of side play but as the controller is used the nylon trigger hole will enlarge and the bearings will wear. Our ball bearings are shimmed so there is zero side play. Our adjustable nut means when the nylon trigger eventually compresses a slight turn will eliminate all side play in our controller.
*We use a rounded wiper button with a very small contract area on the bands. This reduces friction and means that the wiper button is only in contact with a couple bands at any one time. They say they have a "flexible wiper arm", but they also use a flat wiper button. We learned a long time ago that it is impossible to keep a flat wiper button in perfect contact with flat wiper bands. The second you put any side pressure on the trigger you lift up the top, bottom, front or back of the wiper button. So instead of contacting the band on the front edge of the button you are now contacting the band in the middle of the wiper button. Now you just put the wrong amount of power to your car.
CUSTOMER SUPPORT:
All our designs can be serviced, repaired or upgraded by any racer. No returning to the factory, like other controllers! This is important if you want to avoid other manufacturers costly repair bills or if you are in another country.
Ease of maintenance: Your Difalco controller will give you years of trouble free service with a minimum of maintenance. Clearly written instructions are included for every feature. The open frame design makes routine cleaning quick and easy.
Service and support: Complete troubleshooting instructions are included so in the unlikely event a problem should occur racers can quickly diagnose and fix most problems with readily available, inexpensive repair parts. If you ever need assistance, Jim at Difalco Design will be there with his 45 years of slot racing knowledge for advice or to service your controller.
NOT SURE WHICH CONTROLLER YOU NEED? CONTACT JIM at DIFALCO DESIGN FOR ADVICE!
Tell me the fastest and slowest type of car you race, if you race on positive and/or negative tracks and any specific features you want so we can recommend a few options in different price ranges.
| Brand: | Difalco Design |
|---|---|
| Isin: | IGJ6LJAY0EI9 |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Choose your handle color!!!!!!! Just add a message to your order or I can choose the color for you.
Clear,
Midnight
black, Cobalt blue, Red, Sky blue, Gray metallic, Silver metallic,
Lime, Orange crush, Extreme pink, Gold rush, Sage green, Plum crazy
purple, and Lemon yellow color handles
are available.
Difalco H.O. controllers are used by multiple time HOPRA National Champion Roger Porcelli. At the 2019 HOPRA Nationals Roger was Top Qualifier in Pro super stock, CM poly mod, Neo mod and Unlimited classes. Roger won the Super stock and CM poly mod classes, finished 3rd in Unlimited and T-jet and 4th place in Neo mod classes. His performance with his Difalco controller led to the Overall Grand Championship honor for 2019. This was Rogers 3rd time as Grand Champion, all with Difalco controllers!
Congratulations Roger from Difalco Design.
NEO H.O. CONTROLLERS
TECHNICAL HIGHLIGHTS
Computer designed and labeled circuit board. Wiper bands are nickel plated for durability.
Exclusive routed fiberglass frame is separate from the circuit board electronics. This allows for inexpensive upgrades in the future by simply replacing the circuit board.
Adjustable braking and sensitivity rheostats provide a wide adjustment range to match your car, track and driver characteristics for optimal racing performance.
"E"lectronic auto reset brake and power fuses with reverse diode protection for reliability.
High amp transistor design is virtually maintenance free.
Acu-Pivot trigger pin with trigger ball bearings are standard! Ball bearings keep the wiper button firmly in contact with the wiper bands with zero trigger side play even after years of racing.
Rounded wiper button for pinpoint selection of the correct wiper band and reduced friction.
All our designs can be serviced, repaired or upgraded by any racer. No returning to the factory, like other controllers! This is important if you want to avoid other manufacturers costly repair bills or if you are in another country.
Parma style handles are standard on all Difalco controllers. They are more comfortable to hold than that square handle brand! Do not be fooled by off brand handles that are flimsy and will flex in your hand and crack in a couple years!
Neo 1/32 controllers come standard with dual polarity.
GENESIS NEO CONTROLLERS
DD506: Neo HD30 controller. Standard slower response network is installed for T-jet and Fray type cars. Special 30 band design provides excellent speed control in the turns. Optional plug in resistor networks allow the racer to tweak the power curve to best match your type motor, track and driving style. Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats. $169.00
* Our 30 band design with optional plug in networks (pictured above) allows racers to tune our controller for a wider variety of motors. The standard network that comes with this controller is great for most 1/32 cars. We have various optional networks available to tune your controller for high performance 1/32 motors or low voltage operation.
FEATURES TO THINK ABOUT BEFORE YOU BUY ANOTHER CONTROLLER
POWER:
*No inline fuses! We do not put a fuse on our main power lines. Not only does this add resistance to the power circuit it also means you are depending on a cheap fuse block to maintain contact with the fuse. If your ATC mini inline fuse blows your race will be over while you leave the track to replace it. We fuse our transistor outputs and brake line with electronic auto reset fuses that start working as soon as the short circuit is corrected.
*Our controller uses a simple terminal setup to switch between positive and negative polarity. Make sure you have this feature.
MECHANICAL:
*We use a ball bearing trigger with our special threaded trigger pin and adjustable locknut. They claim that their "specially designed pivot rivet provides a snug fit...eliminating the need for aftermarket bearings". I say bull. They use a standard Parma trigger pin. It not only has plenty of side play but as the controller is used the nylon trigger hole will enlarge and the bearings will wear. Our ball bearings are shimmed so there is zero side play. Our adjustable nut means when the nylon trigger eventually compresses a slight turn will eliminate all side play in our controller.
*We use a rounded wiper button with a very small contract area on the bands. This reduces friction and means that the wiper button is only in contact with a couple bands at any one time. They say they have a "flexible wiper arm", but they also use a flat wiper button. We learned a long time ago that it is impossible to keep a flat wiper button in perfect contact with flat wiper bands. The second you put any side pressure on the trigger you lift up the top, bottom, front or back of the wiper button. So instead of contacting the band on the front edge of the button you are now contacting the band in the middle of the wiper button. Now you just put the wrong amount of power to your car.
CUSTOMER SUPPORT:
All our designs can be serviced, repaired or upgraded by any racer. No returning to the factory, like other controllers! This is important if you want to avoid other manufacturers costly repair bills or if you are in another country.
Ease of maintenance: Your Difalco controller will give you years of trouble free service with a minimum of maintenance. Clearly written instructions are included for every feature. The open frame design makes routine cleaning quick and easy.
Service and support: Complete troubleshooting instructions are included so in the unlikely event a problem should occur racers can quickly diagnose and fix most problems with readily available, inexpensive repair parts. If you ever need assistance, Jim at Difalco Design will be there with his 45 years of slot racing knowledge for advice or to service your controller.
NOT SURE WHICH CONTROLLER YOU NEED? CONTACT JIM at DIFALCO DESIGN FOR ADVICE!
Tell me the fastest and slowest type of car you race, if you race on positive and/or negative tracks and any specific features you want so we can recommend a few options in different price ranges.
- Brand: Difalco Design
- Age Level: 4-7, 8-11 Years, 12-16 Years, 17 Years & Up
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.