Dayton Audio EX32HRDS-4 IMS? High Roll Dual Suspension 32mm Interchangeabl
Dayton Audio EX32HRDS-4 IMS? High Roll Dual Suspension 32mm Interchangeabl
_x000D_ Dayton Audio EX32HRDS-4 IMS⢠High Roll Dual Suspension 32mm Interchangeable Hardware Mount Exciter 30W 4 Ohm _x000D_
_x000D__x000D_
_x000D_ Test the limits of your imagination and turn any surface into a great sounding speaker system _x000D_
_x000D__x000D_
_x000D_ Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS⢠Interchangeable Exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system allows you to try out the assortment of exciters offered by Dayton Audio! _x000D_
_x000D__x000D_
_x000D_
_x000D_ Want to learn more about exciters? See our Exciters & Tactile Transducers Introduction Paper! _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_ Key Specs: _x000D_
_x000D_- _x000D_
- _x000D_ Power Handling (RMS): 30 Watts _x000D_
- _x000D_
- _x000D_ Power Handling (MAX): 60 Watts _x000D_
- _x000D_
- _x000D_ Impedance: 4 Ω _x000D_
- _x000D_
- _x000D_ Neodymium Motor _x000D_
- _x000D_
_x000D_
_x000D_ 1/3rd octave smoothing - measurement taken with transducer adhered off-center on a 12" x 12" x ½" foam core board in an infinite baffle setup. _x000D_
_x000D__x000D_ Note: This information is for comparison purposes only, the actual frequency response will depend on many factors of which the diaphragm being the greatest contributor. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_ Aural Excitement _x000D_
_x000D__x000D_
_x000D_
_x000D_ Dayton Audio's 32mm EX32HRDS-4 IMS⢠coin type exciter features the ability to turn nearly any surface into a speaker, this exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_ Exclusive IMS⢠Interchangeable Mounting System _x000D_
_x000D__x000D_
_x000D_
_x000D_ With Dayton Audio's exclusive IMS⢠interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_ _x000D_
_x000D__x000D_ We've Got Your Back _x000D_
_x000D__x000D_ We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability. _x000D_
_x000D_ Learn More _x000D__x000D_
_x000D_
_x000D_
_x000D_ See All Of Our IMS⢠Interchangeable Mount Exciters _x000D_
_x000D__x000D_
_x000D_ All of Dayton's interchangeable mount exciters take advantage of the same mount to provide an easily swappable configuration, pick up yours today from Dayton Audio! _x000D_
_x000D__x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
_x000D_
_x000D_
_x000D_ Show Off Your Builds _x000D_
_x000D__x000D_
_x000D_ We would love to see what you can build. Show off your creativity and skills by uploading to our project gallery. _x000D_
_x000D__x000D_ For inspiration, see what others have built below: _x000D_
_x000D__x000D_
_x000D_
_x000D_ Shimmer Tree by Dan Fox _x000D_
_x000D__x000D_ Shimmer Tree is an impressive six metre high tree-like sound and light sculpture controlled by the wind. As the listener wanders underneath, the directional sound and changing resonances envelope the listener in an evolving and meditative sound bath that responds to the environment. It has 12 branches and 12 large cymbals suspended above head height. Each cymbal is fitted with a tactile transducer, transforming it into a metallic resonator speaker. _x000D_
_x000D__x000D_ SoundPhoto by David F Giroux _x000D_
_x000D__x000D_ I started with a vibrant 12Ã24â³ metal print of fireworks over the Madison, Wis. city skyline â the âShake the Lakeâ show over Lake Monona. This is my own photo, in a high-resolution professional print directly on a sheet of polished aluminum with1.5â³ inset metal frame on the back. I installed a Dayton audio 15w/ch amp and 2 Dayton exciters behind the panel. Power switch, volume control, and aux audio input mounted discreetly on the side. _x000D_
_x000D__x000D_ Bertha by Matty Hughes _x000D_
_x000D__x000D_ My new 192 Watt DIY DML panel build (Bertha)! At 20in x 22in each 1/4â³ thick plexiglass panel is running at 4 ohmâs @ 96 Watts, exciters wired in a series-parallel configuration for each panel and powered by a HiFi 100W x 2 (200W) Bluetooth 5 amp with a 24V 10a power supply. A total of 8 Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciters each 24W 4 Ohm were used for this DML build. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_ _x000D_
_x000D_| Brand: | Dayton Audio |
|---|---|
| Isin: | IRAM8KPG0NAO |
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
_x000D_ Dayton Audio EX32HRDS-4 IMS⢠High Roll Dual Suspension 32mm Interchangeable Hardware Mount Exciter 30W 4 Ohm _x000D_
_x000D__x000D_
_x000D_ Test the limits of your imagination and turn any surface into a great sounding speaker system _x000D_
_x000D__x000D_
_x000D_ Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS⢠Interchangeable Exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system allows you to try out the assortment of exciters offered by Dayton Audio! _x000D_
_x000D__x000D_
_x000D_
_x000D_ Want to learn more about exciters? See our Exciters & Tactile Transducers Introduction Paper! _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_ Key Specs: _x000D_
_x000D_- _x000D_
- _x000D_ Power Handling (RMS): 30 Watts _x000D_
- _x000D_
- _x000D_ Power Handling (MAX): 60 Watts _x000D_
- _x000D_
- _x000D_ Impedance: 4 Ω _x000D_
- _x000D_
- _x000D_ Neodymium Motor _x000D_
- _x000D_
_x000D_
_x000D__x000D_ 1/3rd octave smoothing - measurement taken with transducer adhered off-center on a 12" x 12" x ½" foam core board in an infinite baffle setup. _x000D_
_x000D__x000D_ Note: This information is for comparison purposes only, the actual frequency response will depend on many factors of which the diaphragm being the greatest contributor. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_ Aural Excitement _x000D_
_x000D__x000D_
_x000D_
_x000D_ Dayton Audio's 32mm EX32HRDS-4 IMS⢠coin type exciter features the ability to turn nearly any surface into a speaker, this exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. _x000D_
_x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_ Exclusive IMS⢠Interchangeable Mounting System _x000D_
_x000D__x000D_
_x000D_
_x000D__x000D_ With Dayton Audio's exclusive IMS⢠interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_ _x000D_
_x000D__x000D_ We've Got Your Back _x000D_
_x000D__x000D_ We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability. _x000D_
_x000D_ Learn More _x000D__x000D_
_x000D_
_x000D_
_x000D_ See All Of Our IMS⢠Interchangeable Mount Exciters _x000D_
_x000D__x000D_
_x000D_ All of Dayton's interchangeable mount exciters take advantage of the same mount to provide an easily swappable configuration, pick up yours today from Dayton Audio! _x000D_
_x000D__x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
_x000D_
_x000D_
_x000D_ Show Off Your Builds _x000D_
_x000D__x000D_
_x000D_ We would love to see what you can build. Show off your creativity and skills by uploading to our project gallery. _x000D_
_x000D__x000D_ For inspiration, see what others have built below: _x000D_
_x000D__x000D_
_x000D_
_x000D__x000D_ Shimmer Tree by Dan Fox _x000D_
_x000D__x000D_ Shimmer Tree is an impressive six metre high tree-like sound and light sculpture controlled by the wind. As the listener wanders underneath, the directional sound and changing resonances envelope the listener in an evolving and meditative sound bath that responds to the environment. It has 12 branches and 12 large cymbals suspended above head height. Each cymbal is fitted with a tactile transducer, transforming it into a metallic resonator speaker. _x000D_
_x000D_
_x000D__x000D_ SoundPhoto by David F Giroux _x000D_
_x000D__x000D_ I started with a vibrant 12Ã24â³ metal print of fireworks over the Madison, Wis. city skyline â the âShake the Lakeâ show over Lake Monona. This is my own photo, in a high-resolution professional print directly on a sheet of polished aluminum with1.5â³ inset metal frame on the back. I installed a Dayton audio 15w/ch amp and 2 Dayton exciters behind the panel. Power switch, volume control, and aux audio input mounted discreetly on the side. _x000D_
_x000D_
_x000D__x000D_ Bertha by Matty Hughes _x000D_
_x000D__x000D_ My new 192 Watt DIY DML panel build (Bertha)! At 20in x 22in each 1/4â³ thick plexiglass panel is running at 4 ohmâs @ 96 Watts, exciters wired in a series-parallel configuration for each panel and powered by a HiFi 100W x 2 (200W) Bluetooth 5 amp with a 24V 10a power supply. A total of 8 Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciters each 24W 4 Ohm were used for this DML build. _x000D_
_x000D__x000D_
_x000D_
_x000D_
_x000D_ _x000D_
_x000D_- UPC: 848791009112
- MPN: EX32HRDS-4
- Brand: Dayton Audio
- Manufacturer: Dayton Audio
- Type: Hardware Mount Exciter
- Connectivity: Wired
- Model: EX32HRDS-4
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.