CPSCLUB Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
CPSCLUB Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
CPSCLUB Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
|
|
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
Struts are part of the structural makeup of your vehicle. They complete the suspension system so that your vehicle rides smoothly and efficiently. Not to mention that they dampen spring oscillation to prevent damages to your suspension.Some vehicles have shocks and struts mounted on the front and/or back of the vehicle. Other vehicles only have one or the other. It's important to understand the difference so that you'll know what you'll be working with once you get under the hood.
Application For (Excludes GT & Cobra)
For 1994-2004 Ford Mustang Base Convertible 2-Door 3.8L
For 2004 Ford Mustang Base Convertible 2-Door 3.9L
For 1994-2004 Ford Mustang Base Coupe 2-Door 3.8L
For 2004 Ford Mustang Base Coupe 2-Door 3.9L
For 2003-2004 Ford Mustang Mach I Coupe 2-Door 4.6L
Package Included
1 Pair of Complete Struts Assembly W/ Coil Spring (Left & Right)
What are the benefits replacing the shock absorber?
- Buffer conveys shock to drivers and passengers in order to improve ride comfort and reduce fatigue.
- Extend body life, prevent spring damage and improve braking effect.
- Suppressing the rapid vibration of the wheels while driving, preventing the tires from leaving the road surface and improving the driving stability.
- Improving driving stability and adjustability, effectively conveying engine deflagration pressure to the ground, so as to save fuel costs.
Why should I buy a complete strut assembly instead of replacing the bare strut only?
The complete strut assembly includes a new spring, strut mount, dust bellows, and bump stop. It is about 50% faster and much safer to install a complete strut assembly compared to a bare strut.
Generally, a new strut mount, dust bellows, and bumper are needed with the bare strut replacement. So, the complete strut assembly saves time, is cheaper than the bare strut plus purchasing the replacement strut mount kit and is much safer to install.
Symptoms of a Worn Strut
If your vehicle has racked up a lot of miles, or the miles you've gone have been rough, you might notice:
- Increased Bumpiness
- Cupped Tire Wear
- Increased Body Roll
- Dives When Braking
- Acceleration Squat
- Clunking Noise
These can all be signs that your struts or springs are beginning to wear out and needing replacement. When deciding between a bare strut replacement or a complete strut assembly (loaded strut, quick strut) there are a few issues you should consider.
How to check whether the shock absorber works well？
- Under normal circumstances, oil leakage in the shock absorber means that there is a problem with your shock absorber. You should repair it at this time to avoid abnormal operation of the shock absorber.
- Press the bumper firmly, and then release it. If the car jumps 2 or 3 times, it means that the shock absorber is working well.
- When the car is driving slowly and braking urgently, if the car vibrates violently, it means there is a problem with the shock absorber.
- The car stops after driving 10km on the road with poor road conditions and touches the outer shell with your hands. If the temperature is not high enough, it means that there is no resistance inside the shock absorber and the shock absorber does not work.
Installion
Step 1.Loosen, but don't remove, the front tire's lug nuts.
Step 2.Jack up one side of the vehicle and place a jack stand underneath to secure it.
Step 3.Remove the lug nuts and wheel.
Step 4.Locate the stud and look for any brake lines that may be fastened to it. If there are, carefully remove the brake line and its fasteners without damaging them.
Step 5.Unscrew the bolts that are on the bottom of the strut connecting it to the wheel/steering components. You may need to use spray-on penetrating oil, a socket and breaker bar, and box wrench to remove stubborn bolts if they're rusted.Depending on your vehicle, there may also be a sway, anti-roll or stabilizer bar that needs to be removed.
Step 6.Open the hood and locate the top of the stud where it's attached to the vehicle. On many vehicles, it will appear as three bolts in a circular pattern around a center bolt. Do not remove the center bolt as the strut is compressed under high pressure and loosening the center bolt will allow it to fly loose, damaging anything in its path. Remove the three bolts surrounding the center bolt.At this point, it may be helpful to have a partner holding the strut to keep it from falling and possibly damaging other components like flexible brake lines and boots.
Step 7.Remove old strut assembly from the wheel well, avoiding contact with the CV axle or drive axle so you don't damage them.
Step 8.Install the quick strut following the manufacturer's directions.
Step 9.Repeat the procedure for changing struts on the vehicle's other side.
Step 10.Take the vehicle for a low-speed test drive. After confirming your repair, head down to your trusted repair facility for an alignment.
Why choose us?
- High Quality Product and Materials
- Built to strict quality control standards
- Direct replacement
Note
- Please check complete Year, Make, Model, Trim, and Engine Size of your vehicle in the Compatibility Chart before Purchase.
- If you have any question,please contact us,THANK YOU.
| Item Specifics | |
|---|---|
| Brand | CPSCLUB |
| Manufacturer Part Number | 10381374 |
| Placement on Vehicle | Front,Left, Right |
| Part Type | Shock Absorber Set |
| Fitment Type | Direct Replacement |
| Included Hardware | Mounting Hardware |
| Warranty | 2 Year |
| Adjustable | No |
| Greasable or Sealed | Sealed |
| Interchange Part Number | 235060 ,71962,Driver Side Passenger Side |
| Other Part Number | 71963 |
| Custom Bundle | Yes |
| Surface Finish | Gloss Black |
| Modified Item | No |
| Color | Black |
| Kit or Single Part | Kit |
| Pieces | 2 pcs |
| Gas Charged Shock | Yes |
Note:
Do check the compatible chart before placing order.
Payment:
Paypal Only
Shipping:
48-hour Handling time.
2-8 days delivery with fedEx, USPS, UPS.
Returns & Refunds:
30-day Free Return.
Expect:
I Don't want it.
No Needed.
Ordered by mistake.
Contact Us:
Any question or problem, do feel free to contact us.
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door Struts are part of the structural makeup of your vehicle. They complete the suspension system so that your vehicle rides smoothly and efficiently. Not to mention that they dampen spring oscillation to prevent damages to your suspension.Some vehicles have shocks and struts mounted on the front and/or back of the vehicle. Other vehicles only have one or the other. It's important to understand the difference so that you'll know what you'll be working with once you get under the hood.
For 1994-2004 Ford Mustang Base Convertible 2-Door 3.8L
Package Included 1 Pair of Complete Struts Assembly W/ Coil Spring (Left & Right)
What are the benefits replacing the shock absorber?
Why should I buy a complete strut assembly instead of replacing the bare strut only? The complete strut assembly includes a new spring, strut mount, dust bellows, and bump stop. It is about 50% faster and much safer to install a complete strut assembly compared to a bare strut. Generally, a new strut mount, dust bellows, and bumper are needed with the bare strut replacement. So, the complete strut assembly saves time, is cheaper than the bare strut plus purchasing the replacement strut mount kit and is much safer to install.
Symptoms of a Worn Strut
These can all be signs that your struts or springs are beginning to wear out and needing replacement. When deciding between a bare strut replacement or a complete strut assembly (loaded strut, quick strut) there are a few issues you should consider.
How to check whether the shock absorber works well？
Installion Step 1.Loosen, but don't remove, the front tire's lug nuts. Step 2.Jack up one side of the vehicle and place a jack stand underneath to secure it. Step 3.Remove the lug nuts and wheel. Step 4.Locate the stud and look for any brake lines that may be fastened to it. If there are, carefully remove the brake line and its fasteners without damaging them. Step 5.Unscrew the bolts that are on the bottom of the strut connecting it to the wheel/steering components. You may need to use spray-on penetrating oil, a socket and breaker bar, and box wrench to remove stubborn bolts if they're rusted.Depending on your vehicle, there may also be a sway, anti-roll or stabilizer bar that needs to be removed. Step 6.Open the hood and locate the top of the stud where it's attached to the vehicle. On many vehicles, it will appear as three bolts in a circular pattern around a center bolt. Do not remove the center bolt as the strut is compressed under high pressure and loosening the center bolt will allow it to fly loose, damaging anything in its path. Remove the three bolts surrounding the center bolt.At this point, it may be helpful to have a partner holding the strut to keep it from falling and possibly damaging other components like flexible brake lines and boots. Step 7.Remove old strut assembly from the wheel well, avoiding contact with the CV axle or drive axle so you don't damage them. Step 8.Install the quick strut following the manufacturer's directions. Step 9.Repeat the procedure for changing struts on the vehicle's other side. Step 10.Take the vehicle for a low-speed test drive. After confirming your repair, head down to your trusted repair facility for an alignment.
Why choose us?
Note
Note:
Do check the compatible chart before placing order. Payment:
Paypal Only Shipping:
48-hour Handling time. 2-8 days delivery with fedEx, USPS, UPS. Returns & Refunds:
30-day Free Return. Expect: I Don't want it. No Needed. Ordered by mistake. Contact Us:
Any question or problem, do feel free to contact us. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||
| Brand: | CPSCLUB |
|---|---|
| Isin: | IVEHNFDDRYMY |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
|
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
Struts are part of the structural makeup of your vehicle. They complete the suspension system so that your vehicle rides smoothly and efficiently. Not to mention that they dampen spring oscillation to prevent damages to your suspension.Some vehicles have shocks and struts mounted on the front and/or back of the vehicle. Other vehicles only have one or the other. It's important to understand the difference so that you'll know what you'll be working with once you get under the hood.
Application For (Excludes GT & Cobra)
For 1994-2004 Ford Mustang Base Convertible 2-Door 3.8L
For 2004 Ford Mustang Base Convertible 2-Door 3.9L
For 1994-2004 Ford Mustang Base Coupe 2-Door 3.8L
For 2004 Ford Mustang Base Coupe 2-Door 3.9L
For 2003-2004 Ford Mustang Mach I Coupe 2-Door 4.6L
Package Included
1 Pair of Complete Struts Assembly W/ Coil Spring (Left & Right)
What are the benefits replacing the shock absorber?
- Buffer conveys shock to drivers and passengers in order to improve ride comfort and reduce fatigue.
- Extend body life, prevent spring damage and improve braking effect.
- Suppressing the rapid vibration of the wheels while driving, preventing the tires from leaving the road surface and improving the driving stability.
- Improving driving stability and adjustability, effectively conveying engine deflagration pressure to the ground, so as to save fuel costs.
Why should I buy a complete strut assembly instead of replacing the bare strut only?
The complete strut assembly includes a new spring, strut mount, dust bellows, and bump stop. It is about 50% faster and much safer to install a complete strut assembly compared to a bare strut.
Generally, a new strut mount, dust bellows, and bumper are needed with the bare strut replacement. So, the complete strut assembly saves time, is cheaper than the bare strut plus purchasing the replacement strut mount kit and is much safer to install.
Symptoms of a Worn Strut
If your vehicle has racked up a lot of miles, or the miles you've gone have been rough, you might notice:
- Increased Bumpiness
- Cupped Tire Wear
- Increased Body Roll
- Dives When Braking
- Acceleration Squat
- Clunking Noise
These can all be signs that your struts or springs are beginning to wear out and needing replacement. When deciding between a bare strut replacement or a complete strut assembly (loaded strut, quick strut) there are a few issues you should consider.
How to check whether the shock absorber works well？
- Under normal circumstances, oil leakage in the shock absorber means that there is a problem with your shock absorber. You should repair it at this time to avoid abnormal operation of the shock absorber.
- Press the bumper firmly, and then release it. If the car jumps 2 or 3 times, it means that the shock absorber is working well.
- When the car is driving slowly and braking urgently, if the car vibrates violently, it means there is a problem with the shock absorber.
- The car stops after driving 10km on the road with poor road conditions and touches the outer shell with your hands. If the temperature is not high enough, it means that there is no resistance inside the shock absorber and the shock absorber does not work.
Installion
Step 1.Loosen, but don't remove, the front tire's lug nuts.
Step 2.Jack up one side of the vehicle and place a jack stand underneath to secure it.
Step 3.Remove the lug nuts and wheel.
Step 4.Locate the stud and look for any brake lines that may be fastened to it. If there are, carefully remove the brake line and its fasteners without damaging them.
Step 5.Unscrew the bolts that are on the bottom of the strut connecting it to the wheel/steering components. You may need to use spray-on penetrating oil, a socket and breaker bar, and box wrench to remove stubborn bolts if they're rusted.Depending on your vehicle, there may also be a sway, anti-roll or stabilizer bar that needs to be removed.
Step 6.Open the hood and locate the top of the stud where it's attached to the vehicle. On many vehicles, it will appear as three bolts in a circular pattern around a center bolt. Do not remove the center bolt as the strut is compressed under high pressure and loosening the center bolt will allow it to fly loose, damaging anything in its path. Remove the three bolts surrounding the center bolt.At this point, it may be helpful to have a partner holding the strut to keep it from falling and possibly damaging other components like flexible brake lines and boots.
Step 7.Remove old strut assembly from the wheel well, avoiding contact with the CV axle or drive axle so you don't damage them.
Step 8.Install the quick strut following the manufacturer's directions.
Step 9.Repeat the procedure for changing struts on the vehicle's other side.
Step 10.Take the vehicle for a low-speed test drive. After confirming your repair, head down to your trusted repair facility for an alignment.
Why choose us?
- High Quality Product and Materials
- Built to strict quality control standards
- Direct replacement
Note
- Please check complete Year, Make, Model, Trim, and Engine Size of your vehicle in the Compatibility Chart before Purchase.
- If you have any question,please contact us,THANK YOU.
| Item Specifics | |
|---|---|
| Brand | CPSCLUB |
| Manufacturer Part Number | 10381374 |
| Placement on Vehicle | Front,Left, Right |
| Part Type | Shock Absorber Set |
| Fitment Type | Direct Replacement |
| Included Hardware | Mounting Hardware |
| Warranty | 2 Year |
| Adjustable | No |
| Greasable or Sealed | Sealed |
| Interchange Part Number | 235060 ,71962,Driver Side Passenger Side |
| Other Part Number | 71963 |
| Custom Bundle | Yes |
| Surface Finish | Gloss Black |
| Modified Item | No |
| Color | Black |
| Kit or Single Part | Kit |
| Pieces | 2 pcs |
| Gas Charged Shock | Yes |
Note:
Do check the compatible chart before placing order.
Payment:
Paypal Only
Shipping:
48-hour Handling time.
2-8 days delivery with fedEx, USPS, UPS.
Returns & Refunds:
30-day Free Return.
Expect:
I Don't want it.
No Needed.
Ordered by mistake.
Contact Us:
Any question or problem, do feel free to contact us.
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door
Front Pair Complete Struts Spring Assembly For 94-04 Ford Mustang Base 2-Door Struts are part of the structural makeup of your vehicle. They complete the suspension system so that your vehicle rides smoothly and efficiently. Not to mention that they dampen spring oscillation to prevent damages to your suspension.Some vehicles have shocks and struts mounted on the front and/or back of the vehicle. Other vehicles only have one or the other. It's important to understand the difference so that you'll know what you'll be working with once you get under the hood.
For 1994-2004 Ford Mustang Base Convertible 2-Door 3.8L
Package Included 1 Pair of Complete Struts Assembly W/ Coil Spring (Left & Right)
What are the benefits replacing the shock absorber?
Why should I buy a complete strut assembly instead of replacing the bare strut only? The complete strut assembly includes a new spring, strut mount, dust bellows, and bump stop. It is about 50% faster and much safer to install a complete strut assembly compared to a bare strut. Generally, a new strut mount, dust bellows, and bumper are needed with the bare strut replacement. So, the complete strut assembly saves time, is cheaper than the bare strut plus purchasing the replacement strut mount kit and is much safer to install.
Symptoms of a Worn Strut
These can all be signs that your struts or springs are beginning to wear out and needing replacement. When deciding between a bare strut replacement or a complete strut assembly (loaded strut, quick strut) there are a few issues you should consider.
How to check whether the shock absorber works well？
Installion Step 1.Loosen, but don't remove, the front tire's lug nuts. Step 2.Jack up one side of the vehicle and place a jack stand underneath to secure it. Step 3.Remove the lug nuts and wheel. Step 4.Locate the stud and look for any brake lines that may be fastened to it. If there are, carefully remove the brake line and its fasteners without damaging them. Step 5.Unscrew the bolts that are on the bottom of the strut connecting it to the wheel/steering components. You may need to use spray-on penetrating oil, a socket and breaker bar, and box wrench to remove stubborn bolts if they're rusted.Depending on your vehicle, there may also be a sway, anti-roll or stabilizer bar that needs to be removed. Step 6.Open the hood and locate the top of the stud where it's attached to the vehicle. On many vehicles, it will appear as three bolts in a circular pattern around a center bolt. Do not remove the center bolt as the strut is compressed under high pressure and loosening the center bolt will allow it to fly loose, damaging anything in its path. Remove the three bolts surrounding the center bolt.At this point, it may be helpful to have a partner holding the strut to keep it from falling and possibly damaging other components like flexible brake lines and boots. Step 7.Remove old strut assembly from the wheel well, avoiding contact with the CV axle or drive axle so you don't damage them. Step 8.Install the quick strut following the manufacturer's directions. Step 9.Repeat the procedure for changing struts on the vehicle's other side. Step 10.Take the vehicle for a low-speed test drive. After confirming your repair, head down to your trusted repair facility for an alignment.
Why choose us?
Note
Note:
Do check the compatible chart before placing order. Payment:
Paypal Only Shipping:
48-hour Handling time. 2-8 days delivery with fedEx, USPS, UPS. Returns & Refunds:
30-day Free Return. Expect: I Don't want it. No Needed. Ordered by mistake. Contact Us:
Any question or problem, do feel free to contact us. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||
- UPC: Does not apply
- Brand: CPSCLUB
- Manufacturer Part Number: 10381374
- Placement on Vehicle: Front,Left, Right
- Type: Shock Absorber Set
- Fitment Type: Direct Replacement
- Included Hardware: Mounting Hardware
- Manufacturer Warranty: 2 Year
- Adjustable: No
- Features: Sealed
- Interchange Part Number: 235060 ,71962,Driver Side Passenger Side
- Other Part Number: 71963
- Custom Bundle: Yes
- Surface Finish: Gloss Black
- Modified Item: No
- Color: Black
- Kit or Single Part: Kit
- Pieces: 2 pcs
- Gas Charged Shock: Yes
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.