autoutdoor 2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
autoutdoor 2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
autoutdoor 2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted Connector for Easy Installation
- Precision manufactured with a sensing element incorporating premier technical ceramics
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
Fit Vehicles:
2013-2014 Ram 1500 3.6L
Features:
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
-
Supplied With a Factory-Fitted Connector for Easy Installation
-
Precision manufactured with a sensing element incorporating premier technical ceramics
Where are my oxygen sensors located?
Diagnostic Trouble Codes (DTC)
When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.
How to replace an oxygen sensor?
1- Disconnect the battery.
2- Locate the sensor connector by following its wires. Disconnect it.?
3- Remove the sensor cable from its clips all along its way to the sensor.
4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.
5- Remove the sensor and fit the new one.
6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.
7- Reconnect the battery and wait 5 minutes before starting the engine.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
| Item Specifics | |
|---|---|
| Brand : | autoutdoor |
| Manufacturer Part Number : | ADD83624390R |
| Manufacturer Warranty : | 1 Year |
| Number of Pieces : | 2 |
| Fitment Type : | Direct Replacement |
| Type : | Oxygen Sensor |
| Custom Bundle : | Yes |
| Modified Item : | No |
| Position : | 1Pcs Upstream 1Pcs Downstream |
| Universal Or Specific Fit : | Specific |
| Attachment Method : | Screw-On |
| Thread Size : | M18 |
| Terminal Type : | Blade |
| Thread Diameter : | 0.708 In. |
| Heated : | Yes |
| Hex size : | 7/8 in |
| Number of Wires : | 4 |
| Heated : | Yes |
| Housing Material : | Metal |
| Automotive Color / Finish : | Steel |
| Technology : | Narrow-band |
| Placement on Vehicle : | Before After Catalytic Converter |
| Location : | Front, Rear |
| Output Signal Range (V) : | 0.2 To 0.8 Volt |
| Placement on Vehicle : | Before After Catalytic Converter |
| Location : | Front, Rear |
| Output Signal Range (V) : | 0.2 To 0.8 Volt |
| Type : | Sensor |
| Features : | Direct Fit |
Payment
We will only ship to the confirmed shipping address given with the payment.
We do not offer local pickups.
Shipping
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. The images shown are not the actual item and are for your reference only.
3. Fast shipping:All our packages use USPS Package Service
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
Contact Us
We are always been trying to provide best service and reliable products for every customer.
If you are satisfed with the product you recieved,please leave us positive feedback.
If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.
Shop Category |
2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
Fit Vehicles: 2013-2014 Ram 1500 3.6L
Features:
Where are my oxygen sensors located?
Diagnostic Trouble Codes (DTC)
How to replace an oxygen sensor?
1- Disconnect the battery. 2- Locate the sensor connector by following its wires. Disconnect it.? 3- Remove the sensor cable from its clips all along its way to the sensor. 4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily. 5- Remove the sensor and fit the new one. 6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector. 7- Reconnect the battery and wait 5 minutes before starting the engine.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
We will only ship to the confirmed shipping address given with the payment. We do not offer local pickups. 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. The images shown are not the actual item and are for your reference only. 3. Fast shipping:All our packages use USPS Package Service 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. We are always been trying to provide best service and reliable products for every customer.
Copyright of autoutdoor. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Brand: | autoutdoor |
|---|---|
| Isin: | IUPGJ8ILJHLW |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted Connector for Easy Installation
- Precision manufactured with a sensing element incorporating premier technical ceramics
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
Fit Vehicles:
2013-2014 Ram 1500 3.6L
Features:
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
-
Supplied With a Factory-Fitted Connector for Easy Installation
-
Precision manufactured with a sensing element incorporating premier technical ceramics
Where are my oxygen sensors located?
Diagnostic Trouble Codes (DTC)
When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.
How to replace an oxygen sensor?
1- Disconnect the battery.
2- Locate the sensor connector by following its wires. Disconnect it.?
3- Remove the sensor cable from its clips all along its way to the sensor.
4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.
5- Remove the sensor and fit the new one.
6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.
7- Reconnect the battery and wait 5 minutes before starting the engine.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
| Item Specifics | |
|---|---|
| Brand : | autoutdoor |
| Manufacturer Part Number : | ADD83624390R |
| Manufacturer Warranty : | 1 Year |
| Number of Pieces : | 2 |
| Fitment Type : | Direct Replacement |
| Type : | Oxygen Sensor |
| Custom Bundle : | Yes |
| Modified Item : | No |
| Position : | 1Pcs Upstream 1Pcs Downstream |
| Universal Or Specific Fit : | Specific |
| Attachment Method : | Screw-On |
| Thread Size : | M18 |
| Terminal Type : | Blade |
| Thread Diameter : | 0.708 In. |
| Heated : | Yes |
| Hex size : | 7/8 in |
| Number of Wires : | 4 |
| Heated : | Yes |
| Housing Material : | Metal |
| Automotive Color / Finish : | Steel |
| Technology : | Narrow-band |
| Placement on Vehicle : | Before After Catalytic Converter |
| Location : | Front, Rear |
| Output Signal Range (V) : | 0.2 To 0.8 Volt |
| Placement on Vehicle : | Before After Catalytic Converter |
| Location : | Front, Rear |
| Output Signal Range (V) : | 0.2 To 0.8 Volt |
| Type : | Sensor |
| Features : | Direct Fit |
Payment
We will only ship to the confirmed shipping address given with the payment.
We do not offer local pickups.
Shipping
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. The images shown are not the actual item and are for your reference only.
3. Fast shipping:All our packages use USPS Package Service
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
Contact Us
We are always been trying to provide best service and reliable products for every customer.
If you are satisfed with the product you recieved,please leave us positive feedback.
If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.
Shop Category
Hot Item
New List Item
|
2pcs Oxygen O2 02 Sensor for 2013-2014 Ram 1500 3.6L Upstream Downstream
Fit Vehicles: 2013-2014 Ram 1500 3.6L
Features:
Where are my oxygen sensors located?
Diagnostic Trouble Codes (DTC)
How to replace an oxygen sensor?
1- Disconnect the battery. 2- Locate the sensor connector by following its wires. Disconnect it.? 3- Remove the sensor cable from its clips all along its way to the sensor. 4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily. 5- Remove the sensor and fit the new one. 6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector. 7- Reconnect the battery and wait 5 minutes before starting the engine.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
We will only ship to the confirmed shipping address given with the payment. We do not offer local pickups. 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. The images shown are not the actual item and are for your reference only. 3. Fast shipping:All our packages use USPS Package Service 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. We are always been trying to provide best service and reliable products for every customer.
Copyright of autoutdoor. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- Brand: autoutdoor
- Manufacturer Part Number: ADD83624390R
- Manufacturer Warranty: 1 Year
- UPC: Does not apply
- Number of Pieces: 2
- Fitment Type: Direct Replacement
- Type: Sensor
- Custom Bundle: Yes
- Modified Item: No
- Position: 1Pcs Upstream, 1Pcs Downstream
- Universal Or Specific Fit: Specific
- Attachment Method: Screw-On
- Thread Size: M18
- Terminal Type: Blade
- Thread Diameter: 0.708 In.
- Heated: Yes
- Hex Size: 7/8 in
- Number of Wires: 4
- Housing Material: Metal
- Automotive Color / Finish: Steel
- Technology: Narrow-band
- Placement on Vehicle: Before After Catalytic Converter
- Location: Front, Rear
- Output Signal Range (V): 0.2 To 0.8 Volt
- Features: Direct Fit
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.