Autolution AC Compressor w/ Clutch For Nissan Maxima 3.5L 2009-2013 Murano 09-14 CO 11319C
Autolution AC Compressor w/ Clutch For Nissan Maxima 3.5L 2009-2013 Murano 09-14 CO 11319C
Autolution AC Compressor w/ Clutch For Nissan Maxima 3.5L 2009-2013 Murano 09-14 CO 11319C
- ▶Other
- ▶Power Steering Pump
- ▶Timing Chain Kit
- ▶Ignition Coils
- ▶Power Steering Rack and Pinion
- ▶TurboCharger
- ▶Air Suspension Shock Parts
- ▶Engine Overhaul Kit
- ▶Radiator & Cooling Fan
- ▶Water Pump
- ▶Engine Trans Mount
- ▶A/C Compressor Clutch Kits
- ▶AC Condenser
- ▶Starter
- ▶Alternator
- ▶Carburetor
- ▶Wheel Hub Assembly
- ▶Catalytic Converter
- ▶Auto Light Assembly
- ▶Power Window Regulator
- ▶Throttle Body
- ▶Side Mirror Parts
- ▶Fuel Injectors
AC Compressor w/ Clutch For Nissan Maxima 3.5L 2009-2013 Murano 09-14 CO 11319C
Item Description
OEM/Interchange Part Number:
CO 11319C, 68671, 67671, 11167671, 7512742
68671, 10347880, 5512742, 92600JP01C, 2021990AM
10000652, 6512742
Application For:
For Nissan Maxima 3.5L 2009 2010-2013 For Murano 2009-2013 2014
Specifications:
Length(cm): nan, width(cm): nan, height(cm): nan
Weight(kg): nan
Material: Aluminum Alloy
Color: Silver Black
Placement on Vehicle: Front
Compressor Type: Bidirectional Piston Type
Voltage: 12V
Pulley Groove Quantity: ７ＰＶ
Fitment Type: Belt Driven
Features
Built to strict quality control standards 100% factory tested
Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.
Perfect match for the original car.
Protection against vibration and light side forces.
Great life cycles.
Guaranteed Exact Fit for easy installation
Attention
1. Please confirm compatibility before purchasing to ensure correct fitment. 2. Please ensure the installation site is clean otherwise it will lead to the high temperature of the compressor and the melt of the clutch. 3. Noise, vibration, durability, vacuum decay, and pressure decay need to be tested to ensure no leaks and keep longer life of the compressor. 4. It is strongly recommended to conduct professional maintenance and installation.
Note
The compressor you are ready to replace has failed for some reason, and it is important that you find out the cause of the compressor failure before installing our compressor, a step that allow you to avoid the pain of multiple replacement. 80% of the compressor fail because of a lack of lubricating oil or because of the blockage of the system. Remember, 60% of the oil in the refrigeration system should be in the compressor. So, if the total amount of oil in the system is 200 ML (6.76oz) then the compressor should have 130ML (4.39oz) of oil. Because the refrigerants are circulating in the system with oil, and finally they flow back to the compressor. If the reason for the failure of the original compressor is that there is not oil or there is not enough oil, then the system has a leakage of refrigerant or a place to block, preventing the lubricating oil from flowing back to the compressor. The residue and blockage in the system prevent the normal oil from flowing back to the compressor during the day. If you don’t fix the leak and blockage, this compressor will also fail. Confirm the correct amount of refrigerants on board according to the requirements of OEM. If the refrigerating capacity of the car is insufficient, the amount of refrigerants should be increased. Refer specifically to OEM instructions. After the old compressor is taken down, drain out the oil in it. In this way, turn the compressor upside down and shake the position above the middle of the compressor to pour out the oil. Pour the used oil into a clean cup to see if there is any residue and stains in it. Both variable and compressors have an oil plug that should be removed before pouring oil. If the oil poured out of the old compressor is a thousand clean and has 60% or more of the OEM requirements, flush out remaining oil in the system. At this time, it is necessary to determine why the original compressor failed. *Did the clutch burn out
*Is the voltage output from the system to the clutch correctly
*Is the shaft seal of the compressor or gasket of the cylinder block leaking
If it is one of the above problems, then it is the compressor problem. If the condenser fan fails, it will cause the air flow to reach the condenser to weaken, so that the refrigeration system does not get the required heat. If there is not oil or not enough oil in the compressor, there may be a freon leak in the system, find the leaked part, fix it or replace it, and do not use sealant in the system. Before installing the compressor make sure that the system has the recommended amount of oil too. If the compressor has the amount of oil required but the system doesn’t have enough this will lead to compressor failure any way It takes at least 45 min to clean the system, a process that removes residual solvents and moisture.
NOTICE:Please provide the following shipping information for your order,
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped
3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible
4. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, the updated result will be informed.
If you have made a mistake on purchase and wish to cancel the order before it is dispatched please contact us by ebay message as quickly as possible.
Note:
All parcel will be collected by carrier at 8:00am on Monday to Friday.
SHIPPING:USA Shipping Notice - All items will be dispatched within 24hrs(Mon-Fri)
Estimated Delivery Time
From To Service Est.Delivery Time
US US UPS or Fedex Ground 3-5 Business days
Outside of US DHL FedEx 4-7 Business days
All products have 90 days -5 years warranty (unless otherwise stated).In the very unlikely event that you have a problem with our product, please contact us via eBay messages.
Welcome to our TMG-ToMyGarage eBay Shop. We sell Brand New Auto Parts at factory prices. We have many aftermarket auto parts. including Coilovers ,turbo, Ignition Coils, air spring bags, Air suspension, Cartridge, steering pats, stators.etc. Please remember to add us to your list of favourite sellers.
for comfortable use and best quality in order to guarantee maximum customer satisfaction.We send our products by the selected delivery method within 24 hours and deliver quickly.We guarantee excellent service at fair prices and competent customer support.
Double check shipping address.
We are not responsible for any changes to address after item has been shipped.
Transaction will be held until a full shipping amount received.
Customer assumes shipping charges incurred in shipping to undeliverable address.
Please use Shipping & Payments tab on top of page for shipping details for your location.
International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
| Brand: | Autolution |
|---|---|
| Isin: | I97UGCC3L4P5 |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
- ▶Other
- ▶Power Steering Pump
- ▶Timing Chain Kit
- ▶Ignition Coils
- ▶Power Steering Rack and Pinion
- ▶TurboCharger
- ▶Air Suspension Shock Parts
- ▶Engine Overhaul Kit
- ▶Radiator & Cooling Fan
- ▶Water Pump
- ▶Engine Trans Mount
- ▶A/C Compressor Clutch Kits
- ▶AC Condenser
- ▶Starter
- ▶Alternator
- ▶Carburetor
- ▶Wheel Hub Assembly
- ▶Catalytic Converter
- ▶Auto Light Assembly
- ▶Power Window Regulator
- ▶Throttle Body
- ▶Side Mirror Parts
- ▶Fuel Injectors
AC Compressor w/ Clutch For Nissan Maxima 3.5L 2009-2013 Murano 09-14 CO 11319C
Item Description
OEM/Interchange Part Number:
CO 11319C, 68671, 67671, 11167671, 7512742
68671, 10347880, 5512742, 92600JP01C, 2021990AM
10000652, 6512742
Application For:
For Nissan Maxima 3.5L 2009 2010-2013 For Murano 2009-2013 2014
Specifications:
Length(cm): nan, width(cm): nan, height(cm): nan
Weight(kg): nan
Material: Aluminum Alloy
Color: Silver Black
Placement on Vehicle: Front
Compressor Type: Bidirectional Piston Type
Voltage: 12V
Pulley Groove Quantity: ７ＰＶ
Fitment Type: Belt Driven
Features
Built to strict quality control standards 100% factory tested
Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.
Perfect match for the original car.
Protection against vibration and light side forces.
Great life cycles.
Guaranteed Exact Fit for easy installation
Attention
1. Please confirm compatibility before purchasing to ensure correct fitment. 2. Please ensure the installation site is clean otherwise it will lead to the high temperature of the compressor and the melt of the clutch. 3. Noise, vibration, durability, vacuum decay, and pressure decay need to be tested to ensure no leaks and keep longer life of the compressor. 4. It is strongly recommended to conduct professional maintenance and installation.
Note
The compressor you are ready to replace has failed for some reason, and it is important that you find out the cause of the compressor failure before installing our compressor, a step that allow you to avoid the pain of multiple replacement. 80% of the compressor fail because of a lack of lubricating oil or because of the blockage of the system. Remember, 60% of the oil in the refrigeration system should be in the compressor. So, if the total amount of oil in the system is 200 ML (6.76oz) then the compressor should have 130ML (4.39oz) of oil. Because the refrigerants are circulating in the system with oil, and finally they flow back to the compressor. If the reason for the failure of the original compressor is that there is not oil or there is not enough oil, then the system has a leakage of refrigerant or a place to block, preventing the lubricating oil from flowing back to the compressor. The residue and blockage in the system prevent the normal oil from flowing back to the compressor during the day. If you don’t fix the leak and blockage, this compressor will also fail. Confirm the correct amount of refrigerants on board according to the requirements of OEM. If the refrigerating capacity of the car is insufficient, the amount of refrigerants should be increased. Refer specifically to OEM instructions. After the old compressor is taken down, drain out the oil in it. In this way, turn the compressor upside down and shake the position above the middle of the compressor to pour out the oil. Pour the used oil into a clean cup to see if there is any residue and stains in it. Both variable and compressors have an oil plug that should be removed before pouring oil. If the oil poured out of the old compressor is a thousand clean and has 60% or more of the OEM requirements, flush out remaining oil in the system. At this time, it is necessary to determine why the original compressor failed. *Did the clutch burn out
*Is the voltage output from the system to the clutch correctly
*Is the shaft seal of the compressor or gasket of the cylinder block leaking
If it is one of the above problems, then it is the compressor problem. If the condenser fan fails, it will cause the air flow to reach the condenser to weaken, so that the refrigeration system does not get the required heat. If there is not oil or not enough oil in the compressor, there may be a freon leak in the system, find the leaked part, fix it or replace it, and do not use sealant in the system. Before installing the compressor make sure that the system has the recommended amount of oil too. If the compressor has the amount of oil required but the system doesn’t have enough this will lead to compressor failure any way It takes at least 45 min to clean the system, a process that removes residual solvents and moisture.
NOTICE:Please provide the following shipping information for your order,
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped
3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible
4. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, the updated result will be informed.
If you have made a mistake on purchase and wish to cancel the order before it is dispatched please contact us by ebay message as quickly as possible.
Note:
All parcel will be collected by carrier at 8:00am on Monday to Friday.
SHIPPING:USA Shipping Notice - All items will be dispatched within 24hrs(Mon-Fri)
Estimated Delivery Time
From To Service Est.Delivery Time
US US UPS or Fedex Ground 3-5 Business days
Outside of US DHL FedEx 4-7 Business days
All products have 90 days -5 years warranty (unless otherwise stated).In the very unlikely event that you have a problem with our product, please contact us via eBay messages.
Welcome to our TMG-ToMyGarage eBay Shop. We sell Brand New Auto Parts at factory prices. We have many aftermarket auto parts. including Coilovers ,turbo, Ignition Coils, air spring bags, Air suspension, Cartridge, steering pats, stators.etc. Please remember to add us to your list of favourite sellers.
for comfortable use and best quality in order to guarantee maximum customer satisfaction.We send our products by the selected delivery method within 24 hours and deliver quickly.We guarantee excellent service at fair prices and competent customer support.
Double check shipping address.
We are not responsible for any changes to address after item has been shipped.
Transaction will be held until a full shipping amount received.
Customer assumes shipping charges incurred in shipping to undeliverable address.
Please use Shipping & Payments tab on top of page for shipping details for your location.
International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Brand: Autolution
- Interchange Part Number: CO 11319C
- Items Included: 1 A/C COMPRESSOR W/ CLUTCH
- Manufacturer Part Number: CO 11319C
- Manufacturer Warranty: 5 Years
- Material: Aluminum Alloy
- OE/OEM Part Number: 10000652, 10347880, 11167671, 2021990AM, 5512742, 6512742, 67671, 68671, 7512742, 92600JP01C, CO 11319C
- Pulley Groove Quantity: 7
- Type: A/C Compressor
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.