Aero-Lites.com Aero-Lites LED Aircraft Grade Landing Light Replacement 10-30VDC
Aero-Lites.com Aero-Lites LED Aircraft Grade Landing Light Replacement 10-30VDC
Aero-Lites.com Aero-Lites LED Aircraft Grade Landing Light Replacement 10-30VDC
PAR36 S-L LED Replacement Sealed Beam Spot Lamp | 1,500 Lumens
The S Series is a premium grade PAR36 size LED replacement sealed beam lamp which features a 10degree spot beam. Engineered with aircraft grade components, this is the optimum LED replacement for low to medium wattage (30-100watt) incandescent and halogen glass sealed beam lamps. LED efficiency means this lamp to draw a mere 14watts of power (1.0amp @14VDC). No excuses fit that conforms to virtually all PAR36 critical parameters Including form, fit & function. Our customer base demands guaranteed no excuse fit, RFI/EMI-free aircraft grade components consistent with lamps many times the cost.. Emits 1,500 lumens, low current draw, no heat, and a design life exceeding 10,000 hours.
​
By selling direct to consumers, we are able to offer this high-performance, high-quality lamp for a fraction of the cost of competitors, while providing industry leading in-house customer support.
​
Replaces ANSI Bulb Codes:
Spot Beam: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604
Flood Beam: 4406, 4410, 4411, 4415, 4466, 4502, 4519, 4589, 4593, 4627, 4411-3, H7606, H7610, H7614
​
Spot UPC: 713145670310
Flood UPC: 713145670303
100% satisfaction guarantee and 2-year limited warranty.
SPECIFICATIONS:
Guaranteed EMI/RFI Free
ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 6pc 3watt CREE XP-E
Input voltage: +10 to +30 VDC | Current: 1.0A @ 14vdc / 0.53A @ 28vdc | Beam Pattern: 15° x 15°
Light Intensity: 1,450 Lumens | Color Temperature: 6,000k | Weight: 0.80 lbs | Design life: >20,000hr Wire Termination: 8-32 brass screw terminals | Housing Material: Powdercoated Aluminum Alloy Lens Material: Shatterproof Polycarbonate | Certifications: NOT FAA/PMA APPROVED
LED lighting helps to promote environmental sustainability by reducing energy consumption
DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS
IN THE
USA
Water Resistant / Shockproof
Dust-proof
The LED Aero-Form Advantage: Why choose our LEDs vs legacy sealed beams?
​
Safety
No matter the application, our LED sealed beams are rated for continuous duty-cycle utilization, while emitting negligible radiant heat profile. This feature encourages operators to use the lamp without fear of damage to heat sensitive acrylic light covers, potential for personal injury from burns due to contact with the lamp, or worse case scenarios where collision accidents may compromise the glass envelope of filament style lamps and pose a fire hazard or even explosions if in proximity to volatile compound like fuel and other combustible chemicals.The brightness of LED lamps makes an optimum solution when the lamp is utilized as a signaling/recognition light. The extreme concentration of the light emitted from our lamps is consistent with that of the sun (similar to the reflection of the Sun on an object such as a mirror or reflective glass). This intense brightness is significantly more visible and significantly increases recognition even during the brightest daylight conditions. Our LED sealed beams are not affected by on/off power cycles and the instant illumination of the led when power is applied significantly increases visual stimulation toward the light source. This feature is critical for applications requiring the lamps to pulse/flash for enhanced recognition. *Data has proven that alternating flash patterns measurably reduce bird strike occurrences for aerial applications.​
Efficiency
Our LED direct replacement lamps exclusively feature genuine USA-made CREE chips and requires less than 1/5th of the power of the filament type lamps that they replace. This significant reduction in current makes available valuable electrical current for reduced load on charging systems and batteries, which ensures reserve electrical capacity for other critical appliances such as communication/navigation equipment. The light output of legacy sealed beams is a function of the input voltage. During low engine RPM conditions your charging system may not be able to sustain the required 14 or 28 volts required per the lamp specs, so your sealed beams lamps are likely producing much less than the spec'd light output. Our LED retrofit products feature constant current regulation and produce the same stable light output at any voltage as low as 10-Volts up to 30-Volts DC to eliminate degraded light output in low-voltage situations.​
Durability
Each sealed beam lamp we distribute features durable powder coated aluminum alloy heat sink housings for efficient heat dissipation and maximum protection from chemical, salt spray and moisture exposure. UV-resistant poly-carbonate lenses are virtually indestructible and can be cleaned and polished for years of trouble-free utilization. Epoxy potted heavy duty brass electrical terminals feature stainless steel SAE 8-32 thread wire termination screws to insure excellent mechanical bonding from the circuit wiring to the lamp input terminals. Where many legacy sealed beams are factory rated at 25 hours service life in the most ideal situation, our LED replacements will likely outlive the vehicle on which it is installed considering their design service life exceeding 10,000 hours. Since our LED are not affected by vibration, you will eliminate the aggravation of premature lamp failures and the expense of repetitive replacement of burned out lamps.Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4591, GE 4596, GE 7604, GE 4631 Be sure to compare our lamps to Whelen Parmetheus, AeroLEDs Sunspot, Aveo Engineering, or Teledyne Alphabeam before you spend your hard-earned money!
PAR36 S-L LED Replacement Sealed Beam Spot Lamp | 1,500 Lumens
The S Series is a premium grade PAR36 size LED replacement sealed beam lamp which features a 10degree spot beam. Engineered with aircraft grade components, this is the optimum LED replacement for low to medium wattage (30-100watt) incandescent and halogen glass sealed beam lamps. LED efficiency means this lamp to draw a mere 14watts of power (1.0amp @14VDC). No excuses fit that conforms to virtually all PAR36 critical parameters Including form, fit & function. Our customer base demands guaranteed no excuse fit, RFI/EMI-free aircraft grade components consistent with lamps many times the cost.. Emits 1,500 lumens, low current draw, no heat, and a design life exceeding 10,000 hours.
​
By selling direct to consumers, we are able to offer this high-performance, high-quality lamp for a fraction of the cost of competitors, while providing industry leading in-house customer support.
​
Replaces ANSI Bulb Codes:
Spot Beam: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604
Flood Beam: 4406, 4410, 4411, 4415, 4466, 4502, 4519, 4589, 4593, 4627, 4411-3, H7606, H7610, H7614
​
Spot UPC: 713145670310
Flood UPC: 713145670303
100% satisfaction guarantee and 2-year limited warranty.
SPECIFICATIONS:
ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 6pc 3watt CREE XP-E
Input voltage: +10 to +30 VDC | Current: 1.0A @ 14vdc / 0.53A @ 28vdc | Beam Pattern: 15° x 15°
Light Intensity: 1,450 Lumens | Color Temperature: 6,000k | Weight: 0.80 lbs | Design life: >20,000hr Wire Termination: 8-32 brass screw terminals | Housing Material: Powdercoated Aluminum Alloy Lens Material: Shatterproof Polycarbonate | Certifications: NOT FAA/PMA APPROVED
Guaranteed EMI/RFI Free
Water Resistant / Shockproof
Dust-proof
LED lighting helps to promote environmental sustainability by reducing energy consumption
DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS
IN THE
USA
The LED Aero-Form Advantage: Why choose our LEDs vs legacy sealed beams?
​
Safety
No matter the application, our LED sealed beams are rated for continuous duty-cycle utilization, while emitting negligible radiant heat profile. This feature encourages operators to use the lamp without fear of damage to heat sensitive acrylic light covers, potential for personal injury from burns due to contact with the lamp, or worse case scenarios where collision accidents may compromise the glass envelope of filament style lamps and pose a fire hazard or even explosions if in proximity to volatile compound like fuel and other combustible chemicals.The brightness of LED lamps makes an optimum solution when the lamp is utilized as a signaling/recognition light. The extreme concentration of the light emitted from our lamps is consistent with that of the sun (similar to the reflection of the Sun on an object such as a mirror or reflective glass). This intense brightness is significantly more visible and significantly increases recognition even during the brightest daylight conditions. Our LED sealed beams are not affected by on/off power cycles and the instant illumination of the led when power is applied significantly increases visual stimulation toward the light source. This feature is critical for applications requiring the lamps to pulse/flash for enhanced recognition. *Data has proven that alternating flash patterns measurably reduce bird strike occurrences for aerial applications.​
Efficiency
Our LED direct replacement lamps exclusively feature genuine USA-made CREE chips and requires less than 1/5th of the power of the filament type lamps that they replace. This significant reduction in current makes available valuable electrical current for reduced load on charging systems and batteries, which ensures reserve electrical capacity for other critical appliances such as communication/navigation equipment. The light output of legacy sealed beams is a function of the input voltage. During low engine RPM conditions your charging system may not be able to sustain the required 14 or 28 volts required per the lamp specs, so your sealed beams lamps are likely producing much less than the spec'd light output. Our LED retrofit products feature constant current regulation and produce the same stable light output at any voltage as low as 10-Volts up to 30-Volts DC to eliminate degraded light output in low-voltage situations.​
Durability
Each sealed beam lamp we distribute features durable powder coated aluminum alloy heat sink housings for efficient heat dissipation and maximum protection from chemical, salt spray and moisture exposure. UV-resistant poly-carbonate lenses are virtually indestructible and can be cleaned and polished for years of trouble-free utilization. Epoxy potted heavy duty brass electrical terminals feature stainless steel SAE 8-32 thread wire termination screws to insure excellent mechanical bonding from the circuit wiring to the lamp input terminals. Where many legacy sealed beams are factory rated at 25 hours service life in the most ideal situation, our LED replacements will likely outlive the vehicle on which it is installed considering their design service life exceeding 10,000 hours. Since our LED are not affected by vibration, you will eliminate the aggravation of premature lamp failures and the expense of repetitive replacement of burned out lamps.| Satisfaction Guarantee / Feedback |
Our 100% feedback score is very important to us. If for some reason
you are not satisfied with your purchase please don't hesitate to contact us
and get the issue resolved prior to leaving feedback.
- If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase.
What we mean by our "DROP-IN REPLACEMENT GUARANTEE":
it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY!
WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING!
Drop-in replacement for:
GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4591, GE 4596, GE 7604, GE 4631
Be sure to compare our lamps to Whelen Parmetheus, AeroLEDs Sunspot, Aveo Engineering, or Teledyne Alphabeam before you spend your hard-earned money!
| Brand: | Aero-Lites.com |
|---|---|
| Isin: | ISWVP2EM7IRP |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
PAR36 S-L LED Replacement Sealed Beam Spot Lamp | 1,500 Lumens
The S Series is a premium grade PAR36 size LED replacement sealed beam lamp which features a 10degree spot beam. Engineered with aircraft grade components, this is the optimum LED replacement for low to medium wattage (30-100watt) incandescent and halogen glass sealed beam lamps. LED efficiency means this lamp to draw a mere 14watts of power (1.0amp @14VDC). No excuses fit that conforms to virtually all PAR36 critical parameters Including form, fit & function. Our customer base demands guaranteed no excuse fit, RFI/EMI-free aircraft grade components consistent with lamps many times the cost.. Emits 1,500 lumens, low current draw, no heat, and a design life exceeding 10,000 hours.
​
By selling direct to consumers, we are able to offer this high-performance, high-quality lamp for a fraction of the cost of competitors, while providing industry leading in-house customer support.
​
Replaces ANSI Bulb Codes:
Spot Beam: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604
Flood Beam: 4406, 4410, 4411, 4415, 4466, 4502, 4519, 4589, 4593, 4627, 4411-3, H7606, H7610, H7614
​
Spot UPC: 713145670310
Flood UPC: 713145670303
100% satisfaction guarantee and 2-year limited warranty.
SPECIFICATIONS:
Guaranteed EMI/RFI Free
ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 6pc 3watt CREE XP-E
Input voltage: +10 to +30 VDC | Current: 1.0A @ 14vdc / 0.53A @ 28vdc | Beam Pattern: 15° x 15°
Light Intensity: 1,450 Lumens | Color Temperature: 6,000k | Weight: 0.80 lbs | Design life: >20,000hr Wire Termination: 8-32 brass screw terminals | Housing Material: Powdercoated Aluminum Alloy Lens Material: Shatterproof Polycarbonate | Certifications: NOT FAA/PMA APPROVED
LED lighting helps to promote environmental sustainability by reducing energy consumption
DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS
IN THE
USA
Water Resistant / Shockproof
Dust-proof
The LED Aero-Form Advantage: Why choose our LEDs vs legacy sealed beams?
​
Safety
No matter the application, our LED sealed beams are rated for continuous duty-cycle utilization, while emitting negligible radiant heat profile. This feature encourages operators to use the lamp without fear of damage to heat sensitive acrylic light covers, potential for personal injury from burns due to contact with the lamp, or worse case scenarios where collision accidents may compromise the glass envelope of filament style lamps and pose a fire hazard or even explosions if in proximity to volatile compound like fuel and other combustible chemicals.The brightness of LED lamps makes an optimum solution when the lamp is utilized as a signaling/recognition light. The extreme concentration of the light emitted from our lamps is consistent with that of the sun (similar to the reflection of the Sun on an object such as a mirror or reflective glass). This intense brightness is significantly more visible and significantly increases recognition even during the brightest daylight conditions. Our LED sealed beams are not affected by on/off power cycles and the instant illumination of the led when power is applied significantly increases visual stimulation toward the light source. This feature is critical for applications requiring the lamps to pulse/flash for enhanced recognition. *Data has proven that alternating flash patterns measurably reduce bird strike occurrences for aerial applications.​
Efficiency
Our LED direct replacement lamps exclusively feature genuine USA-made CREE chips and requires less than 1/5th of the power of the filament type lamps that they replace. This significant reduction in current makes available valuable electrical current for reduced load on charging systems and batteries, which ensures reserve electrical capacity for other critical appliances such as communication/navigation equipment. The light output of legacy sealed beams is a function of the input voltage. During low engine RPM conditions your charging system may not be able to sustain the required 14 or 28 volts required per the lamp specs, so your sealed beams lamps are likely producing much less than the spec'd light output. Our LED retrofit products feature constant current regulation and produce the same stable light output at any voltage as low as 10-Volts up to 30-Volts DC to eliminate degraded light output in low-voltage situations.​
Durability
Each sealed beam lamp we distribute features durable powder coated aluminum alloy heat sink housings for efficient heat dissipation and maximum protection from chemical, salt spray and moisture exposure. UV-resistant poly-carbonate lenses are virtually indestructible and can be cleaned and polished for years of trouble-free utilization. Epoxy potted heavy duty brass electrical terminals feature stainless steel SAE 8-32 thread wire termination screws to insure excellent mechanical bonding from the circuit wiring to the lamp input terminals. Where many legacy sealed beams are factory rated at 25 hours service life in the most ideal situation, our LED replacements will likely outlive the vehicle on which it is installed considering their design service life exceeding 10,000 hours. Since our LED are not affected by vibration, you will eliminate the aggravation of premature lamp failures and the expense of repetitive replacement of burned out lamps.Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4591, GE 4596, GE 7604, GE 4631 Be sure to compare our lamps to Whelen Parmetheus, AeroLEDs Sunspot, Aveo Engineering, or Teledyne Alphabeam before you spend your hard-earned money!
PAR36 S-L LED Replacement Sealed Beam Spot Lamp | 1,500 Lumens
The S Series is a premium grade PAR36 size LED replacement sealed beam lamp which features a 10degree spot beam. Engineered with aircraft grade components, this is the optimum LED replacement for low to medium wattage (30-100watt) incandescent and halogen glass sealed beam lamps. LED efficiency means this lamp to draw a mere 14watts of power (1.0amp @14VDC). No excuses fit that conforms to virtually all PAR36 critical parameters Including form, fit & function. Our customer base demands guaranteed no excuse fit, RFI/EMI-free aircraft grade components consistent with lamps many times the cost.. Emits 1,500 lumens, low current draw, no heat, and a design life exceeding 10,000 hours.
​
By selling direct to consumers, we are able to offer this high-performance, high-quality lamp for a fraction of the cost of competitors, while providing industry leading in-house customer support.
​
Replaces ANSI Bulb Codes:
Spot Beam: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604
Flood Beam: 4406, 4410, 4411, 4415, 4466, 4502, 4519, 4589, 4593, 4627, 4411-3, H7606, H7610, H7614
​
Spot UPC: 713145670310
Flood UPC: 713145670303
100% satisfaction guarantee and 2-year limited warranty.
SPECIFICATIONS:
ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 6pc 3watt CREE XP-E
Input voltage: +10 to +30 VDC | Current: 1.0A @ 14vdc / 0.53A @ 28vdc | Beam Pattern: 15° x 15°
Light Intensity: 1,450 Lumens | Color Temperature: 6,000k | Weight: 0.80 lbs | Design life: >20,000hr Wire Termination: 8-32 brass screw terminals | Housing Material: Powdercoated Aluminum Alloy Lens Material: Shatterproof Polycarbonate | Certifications: NOT FAA/PMA APPROVED
Guaranteed EMI/RFI Free
Water Resistant / Shockproof
Dust-proof
LED lighting helps to promote environmental sustainability by reducing energy consumption
DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS
IN THE
USA
The LED Aero-Form Advantage: Why choose our LEDs vs legacy sealed beams?
​
Safety
No matter the application, our LED sealed beams are rated for continuous duty-cycle utilization, while emitting negligible radiant heat profile. This feature encourages operators to use the lamp without fear of damage to heat sensitive acrylic light covers, potential for personal injury from burns due to contact with the lamp, or worse case scenarios where collision accidents may compromise the glass envelope of filament style lamps and pose a fire hazard or even explosions if in proximity to volatile compound like fuel and other combustible chemicals.The brightness of LED lamps makes an optimum solution when the lamp is utilized as a signaling/recognition light. The extreme concentration of the light emitted from our lamps is consistent with that of the sun (similar to the reflection of the Sun on an object such as a mirror or reflective glass). This intense brightness is significantly more visible and significantly increases recognition even during the brightest daylight conditions. Our LED sealed beams are not affected by on/off power cycles and the instant illumination of the led when power is applied significantly increases visual stimulation toward the light source. This feature is critical for applications requiring the lamps to pulse/flash for enhanced recognition. *Data has proven that alternating flash patterns measurably reduce bird strike occurrences for aerial applications.​
Efficiency
Our LED direct replacement lamps exclusively feature genuine USA-made CREE chips and requires less than 1/5th of the power of the filament type lamps that they replace. This significant reduction in current makes available valuable electrical current for reduced load on charging systems and batteries, which ensures reserve electrical capacity for other critical appliances such as communication/navigation equipment. The light output of legacy sealed beams is a function of the input voltage. During low engine RPM conditions your charging system may not be able to sustain the required 14 or 28 volts required per the lamp specs, so your sealed beams lamps are likely producing much less than the spec'd light output. Our LED retrofit products feature constant current regulation and produce the same stable light output at any voltage as low as 10-Volts up to 30-Volts DC to eliminate degraded light output in low-voltage situations.​
Durability
Each sealed beam lamp we distribute features durable powder coated aluminum alloy heat sink housings for efficient heat dissipation and maximum protection from chemical, salt spray and moisture exposure. UV-resistant poly-carbonate lenses are virtually indestructible and can be cleaned and polished for years of trouble-free utilization. Epoxy potted heavy duty brass electrical terminals feature stainless steel SAE 8-32 thread wire termination screws to insure excellent mechanical bonding from the circuit wiring to the lamp input terminals. Where many legacy sealed beams are factory rated at 25 hours service life in the most ideal situation, our LED replacements will likely outlive the vehicle on which it is installed considering their design service life exceeding 10,000 hours. Since our LED are not affected by vibration, you will eliminate the aggravation of premature lamp failures and the expense of repetitive replacement of burned out lamps.| Satisfaction Guarantee / Feedback |
Our 100% feedback score is very important to us. If for some reason
you are not satisfied with your purchase please don't hesitate to contact us
and get the issue resolved prior to leaving feedback.
- If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase.
What we mean by our "DROP-IN REPLACEMENT GUARANTEE":
it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY!
WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING!
Drop-in replacement for:
GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4591, GE 4596, GE 7604, GE 4631
Be sure to compare our lamps to Whelen Parmetheus, AeroLEDs Sunspot, Aveo Engineering, or Teledyne Alphabeam before you spend your hard-earned money!
Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...
Brand
Aero-Lites.com
Compatible Make
PAR36
Manufacturer Part Number
PAR36L201
UPC
713145670273
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.