XADO Premium Full Synthetic 5W-20 SN/GF-5 Motor Oil 7 Quarts (7 x 1 Quart)
XADO Premium Full Synthetic 5W-20 SN/GF-5 Motor Oil 7 Quarts (7 x 1 Quart)
XADO Premium Full Synthetic 5W-20 SN/GF-5 Motor Oil 7 Quarts (7 x 1 Quart)
start_elivehelp_btncodeend_elivehelp_btncode
XADO 5W-20 SN/GF-5 Full Synthetic motor oil with Smart Nanotechnology REVITALIZANT®. This product provides the maximum level of engine protection. It effectively compensates the ongoing wear of engine parts during vehicle operation. Can be used in most passenger cars and light trucks.
- Premium Full Synthetic Motor Oil
- Contains patented XADO® Smart Nanotechnology - Revitalizant®
- Contains Smart Ceramic-Metal Technology
- Prolongs engines Service Life
- Compensates the ongoing wear of engine assemblies and parts
XADO 5W-20 Full Synthetic motor oil meets or exceeds:
SAE 5W-20
API SN-RC
ILSAC GF-5
GM 6094M, Chrysler MS 6395, Ford WSS-M2C-945A/946A, GM dexos1™ Suitable for use in hybrid cars
XADO CHEMICAL GROUP
RIGHT TECHNOLOGY AT THE RIGHT TIME!
Revitalizant®: metal can be healed!
Visual demonstration of Revitalization process
Tested part with a special marking. After an hour of operation the defect was eliminated, we see a perfectly smooth ceramic-metal coating.
Photo 1. The surface of the race groove with deliberately inflicted defect (in the form of letter N).
Photo 2. After 15 minutes – rebuilding of the defect is already evident.
Photo 3. After an hour – you can’t even see the trace of existed scratch!
Products with mysterious name "XADO Revitalizant" first appeared on the shelves of auto stores in December 1999. Today for many automotive enthusiasts around the world Revitalizants have become an integral part of vehicle maintenance and the technology of revitalization has earned a widespread recognition, it’s even included in tribology textbooks. Effective high-quality products containing Revitalizant can be found on the shelves of retail stores in many countries throughout the world. They help to restore and maintain engine compression as well as power and efficiency of the engine at the highest level, eliminate noise in the transmission and power steering, effectively adjust parts in the new vehicle and extend its life span. So how does Revitalizant really work?
Let's experiment!
There is a certain category of people for whom good result is not enough. They want to know the details: how is it done, by what means the result is achieved and exact processes that occur on the surfaces of parts. To see firsthand how terrible defects are eliminated and what is Revitalization, we turned to the experts of XADO tribology laboratory. To verify the claimed effect, it was decided to take a real machine part, measure it, inflict a defect, spread the "magic" grease on it and see what happens.
Revitalization – is the process of bringing back to life, rejuvenation, “healing” of metal surfaces and elimination of defects. These are not just statements, it really works.
The course of experiment
- 1. On the race groove of selected bearing we inflict a defect with the help of engraving cutter (see photo 4), that is we damage the surface on purpose and quite severely. For better visualization, the defects are several times more dangerous than those that may occur on the surface of the part during actual operation.
- 2. Next, we apply grease (0.5 ml). The carrier of Revitalizant in this experiment is "XADO Repairing" grease, which is designed for units and mechanisms with substantial wear up to 80%. This is a normal mass-produced product that can be easily obtained in the store.
- 3. We begin to “heal” the bearing with lubricant under high load conditions (the force of about 8000 N and rotation speed of 1000 rpm).
And this is when Revitalizant begins its treatment, that is, the elimination of the defect by forming a protective ceramic-metal coating on friction surfaces.
Rebuilding of the metal
The process is very fast, so after 15 minutes of work, when outlines of the defect are still visible, we pause the test to see what happened to the surface. Even without any special equipment we can see that the defect is much reduced and there is a build-up of ceramic-metal on the edges. Photos from the microscope (see Photo 5) allow us to view the changes in details - small traces of the factory polishing have already disappeared completely, there is an inflow of the new coating on the edges of the crater.
Photo 4. A fragment of the race groove of the bearing. The original factory surface is rough with deep traces from the factory polishing. In the center - a pinhole (crater), it measures over 0.5 mm in diameter and 0.7 mm in depth, which we created deliberately with engraving cutter for testing purposes.
Photo 5. The same area of the bearing after 15 minutes of high load operation with "XADO Repairing" grease. The surface is smooth and glassy. Traces of the factory polishing have completely disappeared. You can still see the outline of the crater, but you can also clearly see the amount of ceramic-metal layer that rebuilds the pinhole back up.
The growth of ceramic-metal layer occurs at the edges of the crater, gradually filling the defect from the edges toward the center (see drawings).
The complex physics in simple terms.
The work of the bearing under load provides a special machine , which allows to examine the level of reparative, protective and regenerative properties of the products with Revitalizant (gels and lubricants).
We have seen that Revitalizant begins to work in overloaded areas (the extreme wear zones) and the initial rebuilding of the surface during revitalization always occurs in the area of the defect. Why?
Let's see how defects occur in actual engine parts. A scratch or a spall from foreign solid particles (dust, dirt, fine shavings, chips) is enough to cause a defect. It creates a zone of abnormal surface activity. In these zones metal atoms have an uncompensated bond and with the increasing workload they easily "shake" and detach from the matrix. Metal begins to chip. The defect increases in size and the wear progresses even further.
By the way, the effects of such engine wear are predictable and very unpleasant: decrease of engine power and compression, increase in oil consumption and fuel, increase of toxic emissions. According to manufacturers’ technical regulations 20-25% of compression reduction (e.g. from 14 to 10 units) is considered a 100% engine wear. Also it is a bad sign when compression dispersion in cylinders is more than 1.5 units, and oil flow is greater than 0.4-0.6% of fuel consumption (i.e. 0.8 qt for 620 miles with fuel consumption rate 2.6 gal per 62 miles).
To understand the scale of this process, it is enough to say that every gallon of used oil contains about 2 grams of metal. For an engine with 1800 cm3 capacity the loss of only 60 grams of metal is enough for a major overhaul due to wear. It seems that 60 grams for a 220-pound engine is a drop in a bucket. But the trouble is that the loss of metal happens exactly in the key friction pairs (ring - cylinder, neck of the crankshaft - bush, etc.), which are responsible for the operation of the engine! Is it possible to fight wear and remove, rebuild defects? Yes, it is possible, and our experiment is a clear proof of that.
Revitalizant begins to work in the extreme wear points, because there is enough excess energy to start the process and the metal atoms have the largest amount of free uncompensated bonds. These links are like magnets, seize and hold building material – Revitalizant – directly in the extreme wear zone. A few minutes after Revitalization process begins scratches are covered with ceramic-metal patch (photo 2, 5). The zone of abnormal activity disappears. Energy processes are stabilized and build-up of ceramic-metal layer stops.
Demonstration
Mass-production bearing used in fuel systems of diesel engines.
So is it possible to rebuild the metal and eliminate defects? Yes, and our experiment is a clear proof of that.
As an object for demonstration we chose a common bearing. It is easily assembled and disassembled, can withstand heavy loads. It is made of high-alloy tool steel. In vehicles it is used for the production of such high loaded and essentially important units as CV joints, pusher rollers, high pressure pumps’ plungers and gearbox shafts’ bearings.
Conclusion
Revitalizant works wherever there is friction and load. It eliminates bearing clearance and increases its accuracy, reduces ellipticity of the cylinder, optimizes the zones of contact in the toothing of gears, etc. Revitalizant also successfully repairs production defects, which are common.
Metal can really be healed!
© 1991-2017 XADO Chemical Group. All rights reserved.
| Brand: | XADO |
|---|---|
| Isin: | I7NIMQSZWO70 |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
start_elivehelp_btncodeend_elivehelp_btncode
XADO 5W-20 SN/GF-5 Full Synthetic motor oil with Smart Nanotechnology REVITALIZANT®. This product provides the maximum level of engine protection. It effectively compensates the ongoing wear of engine parts during vehicle operation. Can be used in most passenger cars and light trucks.
- Premium Full Synthetic Motor Oil
- Contains patented XADO® Smart Nanotechnology - Revitalizant®
- Contains Smart Ceramic-Metal Technology
- Prolongs engines Service Life
- Compensates the ongoing wear of engine assemblies and parts
XADO 5W-20 Full Synthetic motor oil meets or exceeds:
SAE 5W-20
API SN-RC
ILSAC GF-5
GM 6094M, Chrysler MS 6395, Ford WSS-M2C-945A/946A, GM dexos1™ Suitable for use in hybrid cars
XADO CHEMICAL GROUP
RIGHT TECHNOLOGY AT THE RIGHT TIME!
Revitalizant®: metal can be healed!
Visual demonstration of Revitalization process
Tested part with a special marking. After an hour of operation the defect was eliminated, we see a perfectly smooth ceramic-metal coating.
Photo 1. The surface of the race groove with deliberately inflicted defect (in the form of letter N).
Photo 2. After 15 minutes – rebuilding of the defect is already evident.
Photo 3. After an hour – you can’t even see the trace of existed scratch!
Products with mysterious name "XADO Revitalizant" first appeared on the shelves of auto stores in December 1999. Today for many automotive enthusiasts around the world Revitalizants have become an integral part of vehicle maintenance and the technology of revitalization has earned a widespread recognition, it’s even included in tribology textbooks. Effective high-quality products containing Revitalizant can be found on the shelves of retail stores in many countries throughout the world. They help to restore and maintain engine compression as well as power and efficiency of the engine at the highest level, eliminate noise in the transmission and power steering, effectively adjust parts in the new vehicle and extend its life span. So how does Revitalizant really work?
Let's experiment!
There is a certain category of people for whom good result is not enough. They want to know the details: how is it done, by what means the result is achieved and exact processes that occur on the surfaces of parts. To see firsthand how terrible defects are eliminated and what is Revitalization, we turned to the experts of XADO tribology laboratory. To verify the claimed effect, it was decided to take a real machine part, measure it, inflict a defect, spread the "magic" grease on it and see what happens.
Revitalization – is the process of bringing back to life, rejuvenation, “healing” of metal surfaces and elimination of defects. These are not just statements, it really works.
The course of experiment
- 1. On the race groove of selected bearing we inflict a defect with the help of engraving cutter (see photo 4), that is we damage the surface on purpose and quite severely. For better visualization, the defects are several times more dangerous than those that may occur on the surface of the part during actual operation.
- 2. Next, we apply grease (0.5 ml). The carrier of Revitalizant in this experiment is "XADO Repairing" grease, which is designed for units and mechanisms with substantial wear up to 80%. This is a normal mass-produced product that can be easily obtained in the store.
- 3. We begin to “heal” the bearing with lubricant under high load conditions (the force of about 8000 N and rotation speed of 1000 rpm).
And this is when Revitalizant begins its treatment, that is, the elimination of the defect by forming a protective ceramic-metal coating on friction surfaces.
Rebuilding of the metal
The process is very fast, so after 15 minutes of work, when outlines of the defect are still visible, we pause the test to see what happened to the surface. Even without any special equipment we can see that the defect is much reduced and there is a build-up of ceramic-metal on the edges. Photos from the microscope (see Photo 5) allow us to view the changes in details - small traces of the factory polishing have already disappeared completely, there is an inflow of the new coating on the edges of the crater.
Photo 4. A fragment of the race groove of the bearing. The original factory surface is rough with deep traces from the factory polishing. In the center - a pinhole (crater), it measures over 0.5 mm in diameter and 0.7 mm in depth, which we created deliberately with engraving cutter for testing purposes.
Photo 5. The same area of the bearing after 15 minutes of high load operation with "XADO Repairing" grease. The surface is smooth and glassy. Traces of the factory polishing have completely disappeared. You can still see the outline of the crater, but you can also clearly see the amount of ceramic-metal layer that rebuilds the pinhole back up.
The growth of ceramic-metal layer occurs at the edges of the crater, gradually filling the defect from the edges toward the center (see drawings).
The complex physics in simple terms.
The work of the bearing under load provides a special machine , which allows to examine the level of reparative, protective and regenerative properties of the products with Revitalizant (gels and lubricants).
We have seen that Revitalizant begins to work in overloaded areas (the extreme wear zones) and the initial rebuilding of the surface during revitalization always occurs in the area of the defect. Why?
Let's see how defects occur in actual engine parts. A scratch or a spall from foreign solid particles (dust, dirt, fine shavings, chips) is enough to cause a defect. It creates a zone of abnormal surface activity. In these zones metal atoms have an uncompensated bond and with the increasing workload they easily "shake" and detach from the matrix. Metal begins to chip. The defect increases in size and the wear progresses even further.
By the way, the effects of such engine wear are predictable and very unpleasant: decrease of engine power and compression, increase in oil consumption and fuel, increase of toxic emissions. According to manufacturers’ technical regulations 20-25% of compression reduction (e.g. from 14 to 10 units) is considered a 100% engine wear. Also it is a bad sign when compression dispersion in cylinders is more than 1.5 units, and oil flow is greater than 0.4-0.6% of fuel consumption (i.e. 0.8 qt for 620 miles with fuel consumption rate 2.6 gal per 62 miles).
To understand the scale of this process, it is enough to say that every gallon of used oil contains about 2 grams of metal. For an engine with 1800 cm3 capacity the loss of only 60 grams of metal is enough for a major overhaul due to wear. It seems that 60 grams for a 220-pound engine is a drop in a bucket. But the trouble is that the loss of metal happens exactly in the key friction pairs (ring - cylinder, neck of the crankshaft - bush, etc.), which are responsible for the operation of the engine! Is it possible to fight wear and remove, rebuild defects? Yes, it is possible, and our experiment is a clear proof of that.
Revitalizant begins to work in the extreme wear points, because there is enough excess energy to start the process and the metal atoms have the largest amount of free uncompensated bonds. These links are like magnets, seize and hold building material – Revitalizant – directly in the extreme wear zone. A few minutes after Revitalization process begins scratches are covered with ceramic-metal patch (photo 2, 5). The zone of abnormal activity disappears. Energy processes are stabilized and build-up of ceramic-metal layer stops.
Demonstration
Mass-production bearing used in fuel systems of diesel engines.
So is it possible to rebuild the metal and eliminate defects? Yes, and our experiment is a clear proof of that.
As an object for demonstration we chose a common bearing. It is easily assembled and disassembled, can withstand heavy loads. It is made of high-alloy tool steel. In vehicles it is used for the production of such high loaded and essentially important units as CV joints, pusher rollers, high pressure pumps’ plungers and gearbox shafts’ bearings.
Conclusion
Revitalizant works wherever there is friction and load. It eliminates bearing clearance and increases its accuracy, reduces ellipticity of the cylinder, optimizes the zones of contact in the toothing of gears, etc. Revitalizant also successfully repairs production defects, which are common.
Metal can really be healed!
© 1991-2017 XADO Chemical Group. All rights reserved.
- Country/Region of Manufacture: United States
- Type: Full Synthetic
- Application: Conventional Vehicle
- Units Per Package: Pack of 5
- Manufacturer Part Number: XA 23378
- Volume: 1qt.
- Oil Viscosity: 5W - 20
- Brand: XADO
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.