Unbranded Dim Bulb Tester for Amplifiers current limiter *INCLUDING 100W bulb & METER*
Unbranded Dim Bulb Tester for Amplifiers current limiter *INCLUDING 100W bulb & METER*
Unbranded Dim Bulb Tester for Amplifiers current limiter *INCLUDING 100W bulb & METER*
This is a Dim Bulb Tester
Current Limiter for Stereos, Amplifiers
Current Limiter for Stereos, Amplifiers
Guitar amps
A helpful tool for tube or solid state electronics
including a Standard 100 Watt incandescent bulb
ALSO INCLUDES built-in VOLTMETER!
A NEW 100-watt incandescent light bulb is included for testing most tube circuits
Alternatively,
A 25-35 bulb watt can be employed for testing solid state amplifiers, while a 60 watt bulb would match an all-american-five tube style table radio. Generally the 75-100 watt bulb works well for servicing tube electronic devices, I have found that 150W or more is helpful for devices which also contain motors. I like to gather and keep a set of various wattages for different gear.
This unit is fully built and tested on my bench before I send it to you, should be fully ready-to-use. The switch is for turning everything off/on and could easily be re-wired as a bypass switch if desired. The meter is directly connected to the bottom outlet measuring the voltage your tested item will see.
A dim bulb tester, also known as a light bulb current limiter, is a simple and effective device used in electronics to limit the amount of current flowing through a circuit. The main component of this device is a standard incandescent light bulb, usually of low wattage. The 100 WATT bulb is connected in series with the circuit under test and it will limit current from the full 15 watts down to
0.83 amps
note: voltmeter color/style may differ from that shown in the picture
Here's how it works:
Current Limitation:
When the circuit is powered on, the light bulb acts as a resistor. In the initial moments of powering up the circuit, the resistance of the cold filament in the bulb is much lower than when it's at operating temperature. As a result, a surge of current flows through the bulb.
Filament Resistance:
As the current passes through the filament of the bulb, it heats up and its resistance increases. This rise in resistance limits the current flowing through the circuit.
Indicator of Faults:
If there is a short circuit or excessive current draw in the circuit being tested, the bulb will draw more current, causing it to glow brightly. This serves as an indicator that there is an issue in the circuit.
Troubleshooting Tool:
The dim bulb tester is often used during the initial power-up of a circuit that has been recently constructed or modified, or an older device of unknown condition that has been stored for a length of time. If there are faults such as a short circuit or incorrect connections, the bulb will light up brightly, allowing the user to identify and rectify the issue before connecting the circuit to full power.
Gradual Power-Up:
The gradual warming up of the filament in the bulb also serves as a form of soft start, reducing stress on components and minimizing the risk of damage to the device you are testing during power-up. By limiting the current, it helps prevent damage to sensitive components in case of a fault. Limit current inrush to capacitors and other sensitive components.
While the dim bulb tester is a simple and effective tool for troubleshooting and protecting circuits, it's important to note that it may not catch all types of faults. Additionally, it is not a substitute for proper circuit design and testing procedures.
The bulb may glow under normal operation of the device you are testing, a larger wattage incandescent bulb can be used to raise the current threshold of the tester if the device you are testing is a larger one that seems to "need more power"
Only incandescent bulbs can be used with this unit, DO NOT USE CFL fluorescent or LED bulbs in this unit as it will not provide the desired current limiting functionality.
Use with caution - Use at your own risk
There are dangerous high voltages used in older equipment.
Use with a grounded receptacle, the outlet is grounded to it.
for more great information about dim bulb testers visit sites like:
https://antiqueradio.org/dimbulb.htm
I find it helpful to monitor the voltage going into the equipment with a voltmeter, so I added one! Base/box color may vary from blue ot gray. The voltmeter may vary from blue to green.
This one has a red display as shown. The meter will show the voltage at the outlet of your device.
I have bench tested each unit during assembly, Enjoy!
Don't take my word for it, consider this message from the AI robot:
"This Dim Bulb Tester is a must-have for anyone who works with amplifiers, stereos, or guitar amps. It is designed to limit the current flowing through the device being tested, which helps to avoid damaging it. Made in the United States, this tool is of high quality and is an essential item for any professional or DIY enthusiast.
With its ability to limit current flow, this Dim Bulb Tester is a valuable tool for troubleshooting and testing devices in the audio industry. Its compact size and ease of use make it a convenient addition to any workspace. Whether you're a seasoned professional or just starting out, this Dim Bulb Tester is an essential item that will help you get the job done right."| Brand: | Unbranded |
|---|---|
| Isin: | IGQWXZBXCZ5B |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
This is a Dim Bulb Tester
Current Limiter for Stereos, Amplifiers
Current Limiter for Stereos, Amplifiers
Guitar amps
A helpful tool for tube or solid state electronics
including a Standard 100 Watt incandescent bulb
ALSO INCLUDES built-in VOLTMETER!
A NEW 100-watt incandescent light bulb is included for testing most tube circuits
Alternatively,
A 25-35 bulb watt can be employed for testing solid state amplifiers, while a 60 watt bulb would match an all-american-five tube style table radio. Generally the 75-100 watt bulb works well for servicing tube electronic devices, I have found that 150W or more is helpful for devices which also contain motors. I like to gather and keep a set of various wattages for different gear.
This unit is fully built and tested on my bench before I send it to you, should be fully ready-to-use. The switch is for turning everything off/on and could easily be re-wired as a bypass switch if desired. The meter is directly connected to the bottom outlet measuring the voltage your tested item will see.
A dim bulb tester, also known as a light bulb current limiter, is a simple and effective device used in electronics to limit the amount of current flowing through a circuit. The main component of this device is a standard incandescent light bulb, usually of low wattage. The 100 WATT bulb is connected in series with the circuit under test and it will limit current from the full 15 watts down to
0.83 amps
note: voltmeter color/style may differ from that shown in the picture
Here's how it works:
Current Limitation:
When the circuit is powered on, the light bulb acts as a resistor. In the initial moments of powering up the circuit, the resistance of the cold filament in the bulb is much lower than when it's at operating temperature. As a result, a surge of current flows through the bulb.
Filament Resistance:
As the current passes through the filament of the bulb, it heats up and its resistance increases. This rise in resistance limits the current flowing through the circuit.
Indicator of Faults:
If there is a short circuit or excessive current draw in the circuit being tested, the bulb will draw more current, causing it to glow brightly. This serves as an indicator that there is an issue in the circuit.
Troubleshooting Tool:
The dim bulb tester is often used during the initial power-up of a circuit that has been recently constructed or modified, or an older device of unknown condition that has been stored for a length of time. If there are faults such as a short circuit or incorrect connections, the bulb will light up brightly, allowing the user to identify and rectify the issue before connecting the circuit to full power.
Gradual Power-Up:
The gradual warming up of the filament in the bulb also serves as a form of soft start, reducing stress on components and minimizing the risk of damage to the device you are testing during power-up. By limiting the current, it helps prevent damage to sensitive components in case of a fault. Limit current inrush to capacitors and other sensitive components.
While the dim bulb tester is a simple and effective tool for troubleshooting and protecting circuits, it's important to note that it may not catch all types of faults. Additionally, it is not a substitute for proper circuit design and testing procedures.
The bulb may glow under normal operation of the device you are testing, a larger wattage incandescent bulb can be used to raise the current threshold of the tester if the device you are testing is a larger one that seems to "need more power"
Only incandescent bulbs can be used with this unit, DO NOT USE CFL fluorescent or LED bulbs in this unit as it will not provide the desired current limiting functionality.
Use with caution - Use at your own risk
There are dangerous high voltages used in older equipment.
Use with a grounded receptacle, the outlet is grounded to it.
for more great information about dim bulb testers visit sites like:
https://antiqueradio.org/dimbulb.htm
I find it helpful to monitor the voltage going into the equipment with a voltmeter, so I added one! Base/box color may vary from blue ot gray. The voltmeter may vary from blue to green.
This one has a red display as shown. The meter will show the voltage at the outlet of your device.
I have bench tested each unit during assembly, Enjoy!
Don't take my word for it, consider this message from the AI robot:
"This Dim Bulb Tester is a must-have for anyone who works with amplifiers, stereos, or guitar amps. It is designed to limit the current flowing through the device being tested, which helps to avoid damaging it. Made in the United States, this tool is of high quality and is an essential item for any professional or DIY enthusiast.
With its ability to limit current flow, this Dim Bulb Tester is a valuable tool for troubleshooting and testing devices in the audio industry. Its compact size and ease of use make it a convenient addition to any workspace. Whether you're a seasoned professional or just starting out, this Dim Bulb Tester is an essential item that will help you get the job done right."- Brand: Unbranded
- Type: Dim Bulb Tester
- MPN: not applicable
- Country/Region of Manufacture: United States
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.