Tred-Not 4" dia stovepipe heat exchangers, stove pipe stack snap-on heat radiators
$69.70
- Free US shipping
-
Arrives
This is a set of six cooling radiators. Add on / snap on easily to 4" diameter pipe or stack. (13" circumference) (see other listings for other sizes.)
Popular as stovepipe heat reclaimers / radiators that extract heat from the hot stove pipe and radiate the heat into the room. They will fit 4 inch diameter pipe or stack. See my other listings for 3", 3.6", 5, 6", 7, or 8" diameters. CUSTOM SIZES AVAILABLE....CONTACT ME.
Installed, they make close contact with your pipe and dissipate heat from the hot pipe to be released into the air. They, in effect, increase the surface area of your pipe, therefore allowing more heat to be radiated and released out of the pipe. They work just like the aluminum fins on a motorcycle engine, the increase the area of heat dissipation.
You get one lot of 6 radiators. They are made of 28 high conductivity aluminum, 1 ½" wide. They will work with any hot pipe....home, industrial, automotive exhaust stack, refrigeration, etc.
They attach quickly and easily to your pipe....no screws or tools needed. The ends lock into each other. It takes about 2 minutes to attach all six radiators. The bands conduct heat from the points of contact on the pipe to the loops in the band where the heat is released into the air.
PLEASE, PLEASE......MEASURE THE CIRCUMFERENCE OF YOUR PIPE (the length around) WITH A FLEXIBLE TAPE MEASURE ! Do not guess at your diameter...it is impossible to measure the diameter of an installed pipe. ORDER BY CIRCUMFERENCE....see below.
FREE HEAT...
How much heat? Here is an example for 6" diameter set applied to a stovepipe to capture / reclaim, and dissipate heat into the room:
Each 6” diameter radiator has 11 loops that are 2” x 1.5”…that is 33 square inches of sheet metal.
6 x 33 sq/in = 198 square inches of sheet metal. That is equivalent to a 10" x 19.8” sheet of metal.
So in effect, by installing this set of 6 bands, you create the equivalent of this 10" x 19.8” sheet of hot sheet metal, 300 - 500 degrees, radiating heat from both sides of the sheet into the room before it escapes out the chimney. That is like a small space heater itself...and it is FREE HEAT.
See my other listing for radiators for 3", 3.6", 5", 6", 7", and 8" dia. standard pipes. CUSTOM SIZES AVAILABLE.
If there is a question about which diameter pipe you have, just measure the circumference (around the pipe) and divide by 3.14. The bands will stretch to fit.
They will last a lifetime. They never need maintenance. They may be re-used if you replace the old pipe.
They are guaranteed to draw more heat from the pipe or stack.
You may put on as many bands as you wish or have room for. (Leave at least 1" between bands)
NOTE: The length of pipe in the picture is not part of the sale... It was just for pictures to show the application.
----------------------------------- Stovepipe Sizes Approx. Circumference Diameter Inches (mm) 3” dia = 9 1/2” 240
3.6” dia. = 11.3 290
4” dia = 13” 320
5” dia = 15.7” 400
6” dia = 19” 480
7” dia= 22” 560
8” dia = 25 640 CUSTOM SIZES AVAILABLE.
Note: The bands are adjustable to fit the pipe tightly. They may be stretched to reach about 5% further or the loops may be pinched to make the band 5% shorter (and tighter). |
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
This is a set of six cooling radiators. Add on / snap on easily to 4" diameter pipe or stack. (13" circumference) (see other listings for other sizes.)
Popular as stovepipe heat reclaimers / radiators that extract heat from the hot stove pipe and radiate the heat into the room. They will fit 4 inch diameter pipe or stack. See my other listings for 3", 3.6", 5, 6", 7, or 8" diameters. CUSTOM SIZES AVAILABLE....CONTACT ME.
Installed, they make close contact with your pipe and dissipate heat from the hot pipe to be released into the air. They, in effect, increase the surface area of your pipe, therefore allowing more heat to be radiated and released out of the pipe. They work just like the aluminum fins on a motorcycle engine, the increase the area of heat dissipation.
You get one lot of 6 radiators. They are made of 28 high conductivity aluminum, 1 ½" wide. They will work with any hot pipe....home, industrial, automotive exhaust stack, refrigeration, etc.
They attach quickly and easily to your pipe....no screws or tools needed. The ends lock into each other. It takes about 2 minutes to attach all six radiators. The bands conduct heat from the points of contact on the pipe to the loops in the band where the heat is released into the air.
PLEASE, PLEASE......MEASURE THE CIRCUMFERENCE OF YOUR PIPE (the length around) WITH A FLEXIBLE TAPE MEASURE ! Do not guess at your diameter...it is impossible to measure the diameter of an installed pipe. ORDER BY CIRCUMFERENCE....see below.
FREE HEAT...
How much heat? Here is an example for 6" diameter set applied to a stovepipe to capture / reclaim, and dissipate heat into the room:
Each 6” diameter radiator has 11 loops that are 2” x 1.5”…that is 33 square inches of sheet metal.
6 x 33 sq/in = 198 square inches of sheet metal. That is equivalent to a 10" x 19.8” sheet of metal.
So in effect, by installing this set of 6 bands, you create the equivalent of this 10" x 19.8” sheet of hot sheet metal, 300 - 500 degrees, radiating heat from both sides of the sheet into the room before it escapes out the chimney. That is like a small space heater itself...and it is FREE HEAT.
See my other listing for radiators for 3", 3.6", 5", 6", 7", and 8" dia. standard pipes. CUSTOM SIZES AVAILABLE.
If there is a question about which diameter pipe you have, just measure the circumference (around the pipe) and divide by 3.14. The bands will stretch to fit.
They will last a lifetime. They never need maintenance. They may be re-used if you replace the old pipe.
They are guaranteed to draw more heat from the pipe or stack.
You may put on as many bands as you wish or have room for. (Leave at least 1" between bands)
NOTE: The length of pipe in the picture is not part of the sale... It was just for pictures to show the application.
----------------------------------- Stovepipe Sizes Approx. Circumference Diameter Inches (mm) 3” dia = 9 1/2” 240
3.6” dia. = 11.3 290
4” dia = 13” 320
5” dia = 15.7” 400
6” dia = 19” 480
7” dia= 22” 560
8” dia = 25 640 CUSTOM SIZES AVAILABLE.
Note: The bands are adjustable to fit the pipe tightly. They may be stretched to reach about 5% further or the loops may be pinched to make the band 5% shorter (and tighter). |
This is a set of six cooling radiators. Add on / snap on easily to 4" diameter pipe or stack. (13" circumference) (see other listings for other sizes.)
Popular as stovepipe heat reclaimers / radiators that extract heat from the hot stove pipe and radiate the heat into the room. They will fit 4 inch diameter pipe or stack. See my other listings for 3", 3.6", 5, 6", 7, or 8" diameters. CUSTOM SIZES AVAILABLE....CONTACT ME.
Installed, they make close contact with your pipe and dissipate heat from the hot pipe to be released into the air. They, in effect, increase the surface area of your pipe, therefore allowing more heat to be radiated and released out of the pipe. They work just like the aluminum fins on a motorcycle engine, the increase the area of heat dissipation.
You get one lot of 6 radiators. They are made of 28 high conductivity aluminum, 1 ½" wide. They will work with any hot pipe....home, industrial, automotive exhaust stack, refrigeration, etc.
They attach quickly and easily to your pipe....no screws or tools needed. The ends lock into each other. It takes about 2 minutes to attach all six radiators. The bands conduct heat from the points of contact on the pipe to the loops in the band where the heat is released into the air.
PLEASE, PLEASE......MEASURE THE CIRCUMFERENCE OF YOUR PIPE (the length around) WITH A FLEXIBLE TAPE MEASURE ! Do not guess at your diameter...it is impossible to measure the diameter of an installed pipe. ORDER BY CIRCUMFERENCE....see below.
FREE HEAT...
How much heat? Here is an example for 6" diameter set applied to a stovepipe to capture / reclaim, and dissipate heat into the room:
Each 6” diameter radiator has 11 loops that are 2” x 1.5”…that is 33 square inches of sheet metal.
6 x 33 sq/in = 198 square inches of sheet metal. That is equivalent to a 10" x 19.8” sheet of metal.
So in effect, by installing this set of 6 bands, you create the equivalent of this 10" x 19.8” sheet of hot sheet metal, 300 - 500 degrees, radiating heat from both sides of the sheet into the room before it escapes out the chimney. That is like a small space heater itself...and it is FREE HEAT.
See my other listing for radiators for 3", 3.6", 5", 6", 7", and 8" dia. standard pipes. CUSTOM SIZES AVAILABLE.
If there is a question about which diameter pipe you have, just measure the circumference (around the pipe) and divide by 3.14. The bands will stretch to fit.
They will last a lifetime. They never need maintenance. They may be re-used if you replace the old pipe.
They are guaranteed to draw more heat from the pipe or stack.
You may put on as many bands as you wish or have room for. (Leave at least 1" between bands)
NOTE: The length of pipe in the picture is not part of the sale... It was just for pictures to show the application.
----------------------------------- Stovepipe Sizes Approx. Circumference Diameter Inches (mm) 3” dia = 9 1/2” 240
3.6” dia. = 11.3 290
4” dia = 13” 320
5” dia = 15.7” 400
6” dia = 19” 480
7” dia= 22” 560
8” dia = 25 640 CUSTOM SIZES AVAILABLE.
Note: The bands are adjustable to fit the pipe tightly. They may be stretched to reach about 5% further or the loops may be pinched to make the band 5% shorter (and tighter). |
- Brand: Tred-Not
- Type: Snap-On heat exchanger bands
- Color: Silver
- Number in Pack: 6
- Material: Aluminum
- Country/Region of Manufacture: United States
- UPC: 604013003494
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.