Temprid Bed Bug Killer Spray Temprid FX Insecticide Roach - Ant Killer - 8ML
$27.19
- Free US shipping
-
Arrives
Temprid FX Insecticide Professional BedBug Spray Conc 8mL Btl - Makes 1 Gal
Temprid FX Insecticide 8 mL Bottle
Temprid FX for Bed Bug Control:
Use at a rate of 0.27 fl oz (8 milliliters) of Temprid FX per gallon of water.
Temprid FX is a great product to use for treating Bed Bugs.
Bed Bug eggs that are treated directly with Temprid FX are killed outright while young nymphs that emerge from eggs are killed by dried residue.
1. For infested mattresses, remove bed linens and wash. Dry in a high heat dryer to kill bed bugs. Then, apply solution of Temprid FX and water (8ml product per 1 gallon of water) to tufts, seams, folds, and edges of mattress until moist. Remake bed once mattress dries.
2. In upholstered furniture, apply to tufts, seams, folds, and edges. Do not apply to flat surfaces where prolonged human contact will occur.
3. In luggage, apply to seams, folds, and edges until moist. Be sure luggage is empty and do not use or fill luggage until solution is dry.
4. On baseboards, moldings, curtains, furniture, beneath floor coverings and carpets, in closets, around shelves, and on picture frames, use Temprid FX as a crack and crevice treatment.
5. Reapply every 7 to 10 days as needed until infestation is eliminated.
Controls bed bug populations that are resistant to pyrethroid insecticides. Spray bugs and eggs directly wherever possible following site directions below:
For infested mattresses, remove linens and wash before reuse. Apply to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
Active Ingredient: Imidacloprid - 21%, Beta-Cyfluthrin - 10.5%
Target Insects:
Ants, bed bugs, beetles, crickets, fleas, millipedes, mosquitoes, roaches, silverfish, spiders, ticks, wasps, yellow jackets, stink bugs, kudzu bugs, wood-infesting pests, and many other common pests
INSECTS CONTROLLED: Ants, Bed bugs, Beetles (including Lyctid or powder post, Anobiid or deathwatch, False powderpost, Old house borers, Wharf borers, Ambrosia beetles, Bark beetles), Blue or Green Bottle flies, Boxelder bugs, Carpenter ants, Carpenter bees, Carpet beetles, Centipedes, Clothes moths, Clover mites, Cluster fly, Cockroaches, Crickets, Darkling beetles, Dermestids, Drywood termites, Earwigs, Elm leaf beetles, Fire ants, Firebrats, Fleas, Flesh flies, Flies, Fruit flies, Gnats, Ground beetles, Hide beetles, Hornets, House flies, Leather beetles, Midges, Millipedes, Mosquitoes, Moths, Multicolored Asian lady beetles, Phorid flies, Pill bugs, Sciarid flies (fungus gnats), Scorpions, Silverfish, Sow bugs, Spiders, Springtails, Stable flies, Ticks, Wasps, Yellow jackets
Uses:
Temprid FX provides quick knockdown and long residual control of more than 50 pests, including ants, spiders, cockroaches and other key perimeter pests. The dual action works extremely well on pests like ants, making it one of the best ant control products on the market. While Temprid FX is labeled for indoor and outdoor use, we recommend spraying outside and around the foundation of the home -- spray about 3 ft. up the side of the house, and about 3-5 ft. out from the structure from the base of the foundation (spraying directly on the ground) -- this will give you a powerful contiguous barrier against pests.
Temprid FX is also a powerful option for bed bug control in residential and commercial properties, even when resistance is a concern. Temprid FX is also labeled for many challenging ornamental pests and has low phytotoxicity on a variety of ornamental plants.
ACTIVE INGREDIENTS: Imidacloprid 21%; Beta-Cyfluthrin 10.5%
Temprid FX can be used indoors as a spot treatment or as a void injection by mist, foam, or crack and crevice spray, and outdoors as a perimeter treatment, general surface spray, or foliar application to established landscape ornamentals. Always read the product label completely before use.
Mixing Instructions - Shake concentrate before using. Mix the appropriate amount of Temprid FX Insecticide with water. Add product when filling spray tank with water; shake or agitate mixture. Diluted spray mixture can be stored overnight. Agitate before using.
Re-apply every 7 to 10 days, if needed.
Standard Application Dilution rates / Mixing Ratios:
0.27 fl. oz. (8 mL)/gal. of water – 0.075% total a.i. – maintenance or preventative treatments
0.54 fl. oz. (16 mL)/gal. of water – 0.15% total a.i. – severe infestations, faster knockdown, or longer residual needs
One gallon of finished solution covers approximately 1,000 square feet. For high volume applications for outdoor treatments, dilute at lower concentrations and apply in greater volumes of water.
Temprid FX Insecticide 8 mL Bottle
Temprid FX for Bed Bug Control:
Use at a rate of 0.27 fl oz (8 milliliters) of Temprid FX per gallon of water.
Temprid FX is a great product to use for treating Bed Bugs.
Bed Bug eggs that are treated directly with Temprid FX are killed outright while young nymphs that emerge from eggs are killed by dried residue.
1. For infested mattresses, remove bed linens and wash. Dry in a high heat dryer to kill bed bugs. Then, apply solution of Temprid FX and water (8ml product per 1 gallon of water) to tufts, seams, folds, and edges of mattress until moist. Remake bed once mattress dries.
2. In upholstered furniture, apply to tufts, seams, folds, and edges. Do not apply to flat surfaces where prolonged human contact will occur.
3. In luggage, apply to seams, folds, and edges until moist. Be sure luggage is empty and do not use or fill luggage until solution is dry.
4. On baseboards, moldings, curtains, furniture, beneath floor coverings and carpets, in closets, around shelves, and on picture frames, use Temprid FX as a crack and crevice treatment.
5. Reapply every 7 to 10 days as needed until infestation is eliminated.
Controls bed bug populations that are resistant to pyrethroid insecticides. Spray bugs and eggs directly wherever possible following site directions below:
For infested mattresses, remove linens and wash before reuse. Apply to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
Active Ingredient: Imidacloprid - 21%, Beta-Cyfluthrin - 10.5%
Target Insects:
Ants, bed bugs, beetles, crickets, fleas, millipedes, mosquitoes, roaches, silverfish, spiders, ticks, wasps, yellow jackets, stink bugs, kudzu bugs, wood-infesting pests, and many other common pests
INSECTS CONTROLLED: Ants, Bed bugs, Beetles (including Lyctid or powder post, Anobiid or deathwatch, False powderpost, Old house borers, Wharf borers, Ambrosia beetles, Bark beetles), Blue or Green Bottle flies, Boxelder bugs, Carpenter ants, Carpenter bees, Carpet beetles, Centipedes, Clothes moths, Clover mites, Cluster fly, Cockroaches, Crickets, Darkling beetles, Dermestids, Drywood termites, Earwigs, Elm leaf beetles, Fire ants, Firebrats, Fleas, Flesh flies, Flies, Fruit flies, Gnats, Ground beetles, Hide beetles, Hornets, House flies, Leather beetles, Midges, Millipedes, Mosquitoes, Moths, Multicolored Asian lady beetles, Phorid flies, Pill bugs, Sciarid flies (fungus gnats), Scorpions, Silverfish, Sow bugs, Spiders, Springtails, Stable flies, Ticks, Wasps, Yellow jackets
Uses:
Temprid FX provides quick knockdown and long residual control of more than 50 pests, including ants, spiders, cockroaches and other key perimeter pests. The dual action works extremely well on pests like ants, making it one of the best ant control products on the market. While Temprid FX is labeled for indoor and outdoor use, we recommend spraying outside and around the foundation of the home -- spray about 3 ft. up the side of the house, and about 3-5 ft. out from the structure from the base of the foundation (spraying directly on the ground) -- this will give you a powerful contiguous barrier against pests.
Temprid FX is also a powerful option for bed bug control in residential and commercial properties, even when resistance is a concern. Temprid FX is also labeled for many challenging ornamental pests and has low phytotoxicity on a variety of ornamental plants.
ACTIVE INGREDIENTS: Imidacloprid 21%; Beta-Cyfluthrin 10.5%
Temprid FX can be used indoors as a spot treatment or as a void injection by mist, foam, or crack and crevice spray, and outdoors as a perimeter treatment, general surface spray, or foliar application to established landscape ornamentals. Always read the product label completely before use.
Mixing Instructions - Shake concentrate before using. Mix the appropriate amount of Temprid FX Insecticide with water. Add product when filling spray tank with water; shake or agitate mixture. Diluted spray mixture can be stored overnight. Agitate before using.
Re-apply every 7 to 10 days, if needed.
Standard Application Dilution rates / Mixing Ratios:
0.27 fl. oz. (8 mL)/gal. of water – 0.075% total a.i. – maintenance or preventative treatments
0.54 fl. oz. (16 mL)/gal. of water – 0.15% total a.i. – severe infestations, faster knockdown, or longer residual needs
One gallon of finished solution covers approximately 1,000 square feet. For high volume applications for outdoor treatments, dilute at lower concentrations and apply in greater volumes of water.
Isin:
I2V3IUMFKDUD
Out of Stock
In Stock
• Free 30-Day returns
Backordered
Out of Stock
IBSPOT Buyer Protection
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
Temprid FX Insecticide Professional BedBug Spray Conc 8mL Btl - Makes 1 Gal
Temprid FX Insecticide 8 mL Bottle
Temprid FX for Bed Bug Control:
Use at a rate of 0.27 fl oz (8 milliliters) of Temprid FX per gallon of water.
Temprid FX is a great product to use for treating Bed Bugs.
Bed Bug eggs that are treated directly with Temprid FX are killed outright while young nymphs that emerge from eggs are killed by dried residue.
1. For infested mattresses, remove bed linens and wash. Dry in a high heat dryer to kill bed bugs. Then, apply solution of Temprid FX and water (8ml product per 1 gallon of water) to tufts, seams, folds, and edges of mattress until moist. Remake bed once mattress dries.
2. In upholstered furniture, apply to tufts, seams, folds, and edges. Do not apply to flat surfaces where prolonged human contact will occur.
3. In luggage, apply to seams, folds, and edges until moist. Be sure luggage is empty and do not use or fill luggage until solution is dry.
4. On baseboards, moldings, curtains, furniture, beneath floor coverings and carpets, in closets, around shelves, and on picture frames, use Temprid FX as a crack and crevice treatment.
5. Reapply every 7 to 10 days as needed until infestation is eliminated.
Controls bed bug populations that are resistant to pyrethroid insecticides. Spray bugs and eggs directly wherever possible following site directions below:
For infested mattresses, remove linens and wash before reuse. Apply to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
Active Ingredient: Imidacloprid - 21%, Beta-Cyfluthrin - 10.5%
Target Insects:
Ants, bed bugs, beetles, crickets, fleas, millipedes, mosquitoes, roaches, silverfish, spiders, ticks, wasps, yellow jackets, stink bugs, kudzu bugs, wood-infesting pests, and many other common pests
INSECTS CONTROLLED: Ants, Bed bugs, Beetles (including Lyctid or powder post, Anobiid or deathwatch, False powderpost, Old house borers, Wharf borers, Ambrosia beetles, Bark beetles), Blue or Green Bottle flies, Boxelder bugs, Carpenter ants, Carpenter bees, Carpet beetles, Centipedes, Clothes moths, Clover mites, Cluster fly, Cockroaches, Crickets, Darkling beetles, Dermestids, Drywood termites, Earwigs, Elm leaf beetles, Fire ants, Firebrats, Fleas, Flesh flies, Flies, Fruit flies, Gnats, Ground beetles, Hide beetles, Hornets, House flies, Leather beetles, Midges, Millipedes, Mosquitoes, Moths, Multicolored Asian lady beetles, Phorid flies, Pill bugs, Sciarid flies (fungus gnats), Scorpions, Silverfish, Sow bugs, Spiders, Springtails, Stable flies, Ticks, Wasps, Yellow jackets
Uses:
Temprid FX provides quick knockdown and long residual control of more than 50 pests, including ants, spiders, cockroaches and other key perimeter pests. The dual action works extremely well on pests like ants, making it one of the best ant control products on the market. While Temprid FX is labeled for indoor and outdoor use, we recommend spraying outside and around the foundation of the home -- spray about 3 ft. up the side of the house, and about 3-5 ft. out from the structure from the base of the foundation (spraying directly on the ground) -- this will give you a powerful contiguous barrier against pests.
Temprid FX is also a powerful option for bed bug control in residential and commercial properties, even when resistance is a concern. Temprid FX is also labeled for many challenging ornamental pests and has low phytotoxicity on a variety of ornamental plants.
ACTIVE INGREDIENTS: Imidacloprid 21%; Beta-Cyfluthrin 10.5%
Temprid FX can be used indoors as a spot treatment or as a void injection by mist, foam, or crack and crevice spray, and outdoors as a perimeter treatment, general surface spray, or foliar application to established landscape ornamentals. Always read the product label completely before use.
Mixing Instructions - Shake concentrate before using. Mix the appropriate amount of Temprid FX Insecticide with water. Add product when filling spray tank with water; shake or agitate mixture. Diluted spray mixture can be stored overnight. Agitate before using.
Re-apply every 7 to 10 days, if needed.
Standard Application Dilution rates / Mixing Ratios:
0.27 fl. oz. (8 mL)/gal. of water – 0.075% total a.i. – maintenance or preventative treatments
0.54 fl. oz. (16 mL)/gal. of water – 0.15% total a.i. – severe infestations, faster knockdown, or longer residual needs
One gallon of finished solution covers approximately 1,000 square feet. For high volume applications for outdoor treatments, dilute at lower concentrations and apply in greater volumes of water.
Temprid FX Insecticide 8 mL Bottle
Temprid FX for Bed Bug Control:
Use at a rate of 0.27 fl oz (8 milliliters) of Temprid FX per gallon of water.
Temprid FX is a great product to use for treating Bed Bugs.
Bed Bug eggs that are treated directly with Temprid FX are killed outright while young nymphs that emerge from eggs are killed by dried residue.
1. For infested mattresses, remove bed linens and wash. Dry in a high heat dryer to kill bed bugs. Then, apply solution of Temprid FX and water (8ml product per 1 gallon of water) to tufts, seams, folds, and edges of mattress until moist. Remake bed once mattress dries.
2. In upholstered furniture, apply to tufts, seams, folds, and edges. Do not apply to flat surfaces where prolonged human contact will occur.
3. In luggage, apply to seams, folds, and edges until moist. Be sure luggage is empty and do not use or fill luggage until solution is dry.
4. On baseboards, moldings, curtains, furniture, beneath floor coverings and carpets, in closets, around shelves, and on picture frames, use Temprid FX as a crack and crevice treatment.
5. Reapply every 7 to 10 days as needed until infestation is eliminated.
Controls bed bug populations that are resistant to pyrethroid insecticides. Spray bugs and eggs directly wherever possible following site directions below:
For infested mattresses, remove linens and wash before reuse. Apply to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
Active Ingredient: Imidacloprid - 21%, Beta-Cyfluthrin - 10.5%
Target Insects:
Ants, bed bugs, beetles, crickets, fleas, millipedes, mosquitoes, roaches, silverfish, spiders, ticks, wasps, yellow jackets, stink bugs, kudzu bugs, wood-infesting pests, and many other common pests
INSECTS CONTROLLED: Ants, Bed bugs, Beetles (including Lyctid or powder post, Anobiid or deathwatch, False powderpost, Old house borers, Wharf borers, Ambrosia beetles, Bark beetles), Blue or Green Bottle flies, Boxelder bugs, Carpenter ants, Carpenter bees, Carpet beetles, Centipedes, Clothes moths, Clover mites, Cluster fly, Cockroaches, Crickets, Darkling beetles, Dermestids, Drywood termites, Earwigs, Elm leaf beetles, Fire ants, Firebrats, Fleas, Flesh flies, Flies, Fruit flies, Gnats, Ground beetles, Hide beetles, Hornets, House flies, Leather beetles, Midges, Millipedes, Mosquitoes, Moths, Multicolored Asian lady beetles, Phorid flies, Pill bugs, Sciarid flies (fungus gnats), Scorpions, Silverfish, Sow bugs, Spiders, Springtails, Stable flies, Ticks, Wasps, Yellow jackets
Uses:
Temprid FX provides quick knockdown and long residual control of more than 50 pests, including ants, spiders, cockroaches and other key perimeter pests. The dual action works extremely well on pests like ants, making it one of the best ant control products on the market. While Temprid FX is labeled for indoor and outdoor use, we recommend spraying outside and around the foundation of the home -- spray about 3 ft. up the side of the house, and about 3-5 ft. out from the structure from the base of the foundation (spraying directly on the ground) -- this will give you a powerful contiguous barrier against pests.
Temprid FX is also a powerful option for bed bug control in residential and commercial properties, even when resistance is a concern. Temprid FX is also labeled for many challenging ornamental pests and has low phytotoxicity on a variety of ornamental plants.
ACTIVE INGREDIENTS: Imidacloprid 21%; Beta-Cyfluthrin 10.5%
Temprid FX can be used indoors as a spot treatment or as a void injection by mist, foam, or crack and crevice spray, and outdoors as a perimeter treatment, general surface spray, or foliar application to established landscape ornamentals. Always read the product label completely before use.
Mixing Instructions - Shake concentrate before using. Mix the appropriate amount of Temprid FX Insecticide with water. Add product when filling spray tank with water; shake or agitate mixture. Diluted spray mixture can be stored overnight. Agitate before using.
Re-apply every 7 to 10 days, if needed.
Standard Application Dilution rates / Mixing Ratios:
0.27 fl. oz. (8 mL)/gal. of water – 0.075% total a.i. – maintenance or preventative treatments
0.54 fl. oz. (16 mL)/gal. of water – 0.15% total a.i. – severe infestations, faster knockdown, or longer residual needs
One gallon of finished solution covers approximately 1,000 square feet. For high volume applications for outdoor treatments, dilute at lower concentrations and apply in greater volumes of water.
Isin:
I2V3IUMFKDUD
Temprid FX Insecticide Professional BedBug Spray Conc 8mL Btl - Makes 1 Gal
Temprid FX Insecticide 8 mL Bottle
Temprid FX for Bed Bug Control:
Use at a rate of 0.27 fl oz (8 milliliters) of Temprid FX per gallon of water.
Temprid FX is a great product to use for treating Bed Bugs.
Bed Bug eggs that are treated directly with Temprid FX are killed outright while young nymphs that emerge from eggs are killed by dried residue.
1. For infested mattresses, remove bed linens and wash. Dry in a high heat dryer to kill bed bugs. Then, apply solution of Temprid FX and water (8ml product per 1 gallon of water) to tufts, seams, folds, and edges of mattress until moist. Remake bed once mattress dries.
2. In upholstered furniture, apply to tufts, seams, folds, and edges. Do not apply to flat surfaces where prolonged human contact will occur.
3. In luggage, apply to seams, folds, and edges until moist. Be sure luggage is empty and do not use or fill luggage until solution is dry.
4. On baseboards, moldings, curtains, furniture, beneath floor coverings and carpets, in closets, around shelves, and on picture frames, use Temprid FX as a crack and crevice treatment.
5. Reapply every 7 to 10 days as needed until infestation is eliminated.
Controls bed bug populations that are resistant to pyrethroid insecticides. Spray bugs and eggs directly wherever possible following site directions below:
For infested mattresses, remove linens and wash before reuse. Apply to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
Active Ingredient: Imidacloprid - 21%, Beta-Cyfluthrin - 10.5%
Target Insects:
Ants, bed bugs, beetles, crickets, fleas, millipedes, mosquitoes, roaches, silverfish, spiders, ticks, wasps, yellow jackets, stink bugs, kudzu bugs, wood-infesting pests, and many other common pests
INSECTS CONTROLLED: Ants, Bed bugs, Beetles (including Lyctid or powder post, Anobiid or deathwatch, False powderpost, Old house borers, Wharf borers, Ambrosia beetles, Bark beetles), Blue or Green Bottle flies, Boxelder bugs, Carpenter ants, Carpenter bees, Carpet beetles, Centipedes, Clothes moths, Clover mites, Cluster fly, Cockroaches, Crickets, Darkling beetles, Dermestids, Drywood termites, Earwigs, Elm leaf beetles, Fire ants, Firebrats, Fleas, Flesh flies, Flies, Fruit flies, Gnats, Ground beetles, Hide beetles, Hornets, House flies, Leather beetles, Midges, Millipedes, Mosquitoes, Moths, Multicolored Asian lady beetles, Phorid flies, Pill bugs, Sciarid flies (fungus gnats), Scorpions, Silverfish, Sow bugs, Spiders, Springtails, Stable flies, Ticks, Wasps, Yellow jackets
Uses:
Temprid FX provides quick knockdown and long residual control of more than 50 pests, including ants, spiders, cockroaches and other key perimeter pests. The dual action works extremely well on pests like ants, making it one of the best ant control products on the market. While Temprid FX is labeled for indoor and outdoor use, we recommend spraying outside and around the foundation of the home -- spray about 3 ft. up the side of the house, and about 3-5 ft. out from the structure from the base of the foundation (spraying directly on the ground) -- this will give you a powerful contiguous barrier against pests.
Temprid FX is also a powerful option for bed bug control in residential and commercial properties, even when resistance is a concern. Temprid FX is also labeled for many challenging ornamental pests and has low phytotoxicity on a variety of ornamental plants.
ACTIVE INGREDIENTS: Imidacloprid 21%; Beta-Cyfluthrin 10.5%
Temprid FX can be used indoors as a spot treatment or as a void injection by mist, foam, or crack and crevice spray, and outdoors as a perimeter treatment, general surface spray, or foliar application to established landscape ornamentals. Always read the product label completely before use.
Mixing Instructions - Shake concentrate before using. Mix the appropriate amount of Temprid FX Insecticide with water. Add product when filling spray tank with water; shake or agitate mixture. Diluted spray mixture can be stored overnight. Agitate before using.
Re-apply every 7 to 10 days, if needed.
Standard Application Dilution rates / Mixing Ratios:
0.27 fl. oz. (8 mL)/gal. of water – 0.075% total a.i. – maintenance or preventative treatments
0.54 fl. oz. (16 mL)/gal. of water – 0.15% total a.i. – severe infestations, faster knockdown, or longer residual needs
One gallon of finished solution covers approximately 1,000 square feet. For high volume applications for outdoor treatments, dilute at lower concentrations and apply in greater volumes of water.
Temprid FX Insecticide 8 mL Bottle
Temprid FX for Bed Bug Control:
Use at a rate of 0.27 fl oz (8 milliliters) of Temprid FX per gallon of water.
Temprid FX is a great product to use for treating Bed Bugs.
Bed Bug eggs that are treated directly with Temprid FX are killed outright while young nymphs that emerge from eggs are killed by dried residue.
1. For infested mattresses, remove bed linens and wash. Dry in a high heat dryer to kill bed bugs. Then, apply solution of Temprid FX and water (8ml product per 1 gallon of water) to tufts, seams, folds, and edges of mattress until moist. Remake bed once mattress dries.
2. In upholstered furniture, apply to tufts, seams, folds, and edges. Do not apply to flat surfaces where prolonged human contact will occur.
3. In luggage, apply to seams, folds, and edges until moist. Be sure luggage is empty and do not use or fill luggage until solution is dry.
4. On baseboards, moldings, curtains, furniture, beneath floor coverings and carpets, in closets, around shelves, and on picture frames, use Temprid FX as a crack and crevice treatment.
5. Reapply every 7 to 10 days as needed until infestation is eliminated.
Controls bed bug populations that are resistant to pyrethroid insecticides. Spray bugs and eggs directly wherever possible following site directions below:
For infested mattresses, remove linens and wash before reuse. Apply to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed.
Apply to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust.
Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
Active Ingredient: Imidacloprid - 21%, Beta-Cyfluthrin - 10.5%
Target Insects:
Ants, bed bugs, beetles, crickets, fleas, millipedes, mosquitoes, roaches, silverfish, spiders, ticks, wasps, yellow jackets, stink bugs, kudzu bugs, wood-infesting pests, and many other common pests
INSECTS CONTROLLED: Ants, Bed bugs, Beetles (including Lyctid or powder post, Anobiid or deathwatch, False powderpost, Old house borers, Wharf borers, Ambrosia beetles, Bark beetles), Blue or Green Bottle flies, Boxelder bugs, Carpenter ants, Carpenter bees, Carpet beetles, Centipedes, Clothes moths, Clover mites, Cluster fly, Cockroaches, Crickets, Darkling beetles, Dermestids, Drywood termites, Earwigs, Elm leaf beetles, Fire ants, Firebrats, Fleas, Flesh flies, Flies, Fruit flies, Gnats, Ground beetles, Hide beetles, Hornets, House flies, Leather beetles, Midges, Millipedes, Mosquitoes, Moths, Multicolored Asian lady beetles, Phorid flies, Pill bugs, Sciarid flies (fungus gnats), Scorpions, Silverfish, Sow bugs, Spiders, Springtails, Stable flies, Ticks, Wasps, Yellow jackets
Uses:
Temprid FX provides quick knockdown and long residual control of more than 50 pests, including ants, spiders, cockroaches and other key perimeter pests. The dual action works extremely well on pests like ants, making it one of the best ant control products on the market. While Temprid FX is labeled for indoor and outdoor use, we recommend spraying outside and around the foundation of the home -- spray about 3 ft. up the side of the house, and about 3-5 ft. out from the structure from the base of the foundation (spraying directly on the ground) -- this will give you a powerful contiguous barrier against pests.
Temprid FX is also a powerful option for bed bug control in residential and commercial properties, even when resistance is a concern. Temprid FX is also labeled for many challenging ornamental pests and has low phytotoxicity on a variety of ornamental plants.
ACTIVE INGREDIENTS: Imidacloprid 21%; Beta-Cyfluthrin 10.5%
Temprid FX can be used indoors as a spot treatment or as a void injection by mist, foam, or crack and crevice spray, and outdoors as a perimeter treatment, general surface spray, or foliar application to established landscape ornamentals. Always read the product label completely before use.
Mixing Instructions - Shake concentrate before using. Mix the appropriate amount of Temprid FX Insecticide with water. Add product when filling spray tank with water; shake or agitate mixture. Diluted spray mixture can be stored overnight. Agitate before using.
Re-apply every 7 to 10 days, if needed.
Standard Application Dilution rates / Mixing Ratios:
0.27 fl. oz. (8 mL)/gal. of water – 0.075% total a.i. – maintenance or preventative treatments
0.54 fl. oz. (16 mL)/gal. of water – 0.15% total a.i. – severe infestations, faster knockdown, or longer residual needs
One gallon of finished solution covers approximately 1,000 square feet. For high volume applications for outdoor treatments, dilute at lower concentrations and apply in greater volumes of water.
Item Specifics
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.99 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We may provide a return shipping label for your return. If the return is due to our error, such as receiving the wrong item, a damaged item, or a defective product, we will cover the return shipping cost.
If the return is due to the customer’s reason, such as ordering the wrong item, changing your mind, or no longer needing the item, the original shipping fee and the return label fee will be deducted from your refund amount.
If a return is sent back without prior contact or without using our provided label, we cannot be held responsible for any return shipping costs or delivery issues.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.