Southern Ag Broadloom Sedge Control 16oz Controls Broad Leaf Weeds Annual Sedges
Southern Ag Broadloom Sedge Control 16oz Controls Broad Leaf Weeds Annual Sedges
Southern Ag Broadloom Sedge Control 16oz Controls Broad Leaf Weeds Annual Sedges
Product Overview
Broadloom Sedge Control 16oz by Southern Ag
Broadloom Sedge Control is a postemergence herbicide for selective control of broad leaf weeds, annual sedges, and yellow nutsedge in the following
use sites:
* Established turf grass * Ornamentals
Broadloom Sedge Control does not control grasses. Broadloom Sedge Control is effective mainly through contact action; thorough coverage of weeds is
critical for control.
Turf grass and Ornamentals Tolerance
All labeled plants are tolerant to Broadloom Sedge Control. Leaf speckling or bronzing may occur, but plants generally outgrow this condition within 10
days. New growth will be normal and plant vigor will not be reduced.
APPLICATION INSTRUCTIONS
Apply early postemergence to actively growing weeds as broadcast, band, or spot spray applications at the rates and growth stages listed in the weed
table. For best results make postemergence applications of Broadloom Sedge Control early when weeds are small. Early application provides best weed
control (exceptions: yellow nutsedge and Canada thistle), allows use of the lower rate (depending on weed species), and makes thorough spray coverage
easier. Delaying application allows weeds to exceed the maximum size stated and will prevent adequate control. Do not apply when conditions favor drift
from target area or when windspeed is greater than 10 mph.
Spray Coverage - Weeds must be thoroughly covered with spray. Dense leaf canopies shelter smaller weeds and can prevent adequate spray coverage.
Cultivation - Do not cultivate within 5 days before applying Broadloom Sedge Control or 7 days after application. Timely cultivation after 7 days may help
provide season-long control.
Sprayer Equipment - Apply Broadloom Sedge Control with handheld pump-up and knapsack sprayers, or hose-end type sprayers.
Cleaning Spray Equipment
Clean application equipment thoroughly particularly if the herbicide previously used has the potential to injure turf grass or ornamentals. Use a strong detergent or commercial sprayer cleaner according to the manufacturer’s directions and then triple rinsing the equipment before and after applying this product.
Application Mixing Instructions
Fill a thoroughly clean spray tank 1/2 to 2/3 full of clean water. Add Broadloom Sedge Control and shake or stir the spray solution to mix thoroughly. Add
the remaining volume of water and shake or stir the spray solution to mix thoroughly. Mix only enough spray solution for one use. Use a fresh spray mixture
for each application.
Apply Broadloom Sedge Control with a minimum water volume of 1 gallon per 1,000 sq. ft. and a minimum spray pressure of 40 psi (measured at the
boom, not at the pump or in the line).
Addition of Oil Concentrate
A nonphytotoxic oil concentrate may be added to the spray tank for certain weed problems. The oil concentrate must contain either a petroleum-oil or
vegetable-oil base and must meet all the following criteria: nonphytotoxic
contain only EPA-exempt ingredients
provide good mixing quality in the jar test (see below)
successful in local experience
The exact composition of suitable products will vary; however, vegetable-oil and petroleum- oil concentrates should contain emulsifiers which provide good
mixing quality. Highly refined vegetable oils are more satisfactory than unrefined vegetable oils.
Adding an oil concentrate may cause some leaf burn, but new growth is normal and crop vigor will not be reduced. There is a greater potential for leaf
burn when relative humidity and temperature are high. Some oil concentrates cause excessive leaf burn, so refer to your supplier for information concerning successful local experience before purchasing any oil concentrate.
Application Mixing Instructions with Oil Concentrate
Fill a thoroughly clean spray tank 1/2 to 2/3 full with clean water. Add Broadloom Sedge Control and shake or stir the spray solution so that Broadloom
Sedge Control and water mix thoroughly. Add the oil concentrate and the remaining volume of water. Again, shake or stir the spray solution so the Broadloom Herbicide, oil concentrate, and water mix thoroughly. Mix only enough spray solution for one use; use a fresh spray mixture for each application.
Rate of Oil Concentrate
For 1.0 to 2.0 gallons of water volume per 1,000 sq. ft., use 0.75 fl. oz. (5 teaspoons) of oil concentrate or a proportionate amount for other-sized areas.
Precautions
* Rainfall or sprinkler irrigation within 8 hours after application may nullify the effectiveness of Broadloom Sedge Control.
Restrictions
* DO NOT apply more than 1 lb. active ingredient per acre in a single application, or more than a total of 2 Ibs. active ingredient (bentazon) per acre per
season.
* DO NOT apply more than a total of 1.5 fl. ozs. of Broadloom Sedge Control per 1,000 sq. ft. per calendar year.
* Do not apply during windy conditions because spray drift may cause damage to adjacent desired ornamental plants.
* DO NOT cultivate or mow within five days before or after a Broadloom Sedge Control application.
* DO NOT apply Broadloom Sedge Control plus oil concentrate in combination with other pesticides whose labels indicate they may not be used with oil
adjuvants.
* DO NOT apply Broadloom Sedge Control during prolonged periods of drought or during unseasonably cold weather because unsatisfactory weed
control may result.
Table 1. Weeds Controlled
Broadloom Sedge Control Apply
ESTABLISHED TURFGRASS
Product Information
Use Broadloom Sedge Control on established bluegrass, fescue, bentgrass, Bermudagrass, bahiagrass, centipedegrass, zoysiagrass, ryegrass, and St.
Augustinegrass. Broadloom Sedge Control provides selective postemergence control of broad leaf weeds, annual sedges, and yellow nutsedge. Broadloom Sedge Control does not control grasses. Broadloom Sedge Control is effective mainly through contact; therefore, all plants must be thoroughly
covered with spray.
Application Information
Apply Broadloom Sedge Control postemergence to actively growing weeds under good soil moisture conditions.
Yellow Nutsedge Control - If desired control of yellow nutsedge or Canada thistle is not obtained with the first application, make a second application 10-14
days later or when new growth appears. In the northern United States, yellow nutsedge can emerge from May through July, while in the southern United
States, nutsedge and broad leaf weeds can emerge throughout the year. Always plan initial applications when most plants have emerged. If new plants
emerge later in the season, make a second application of Broadloom Sedge Control according to the label directions. In unmowed turf, make the first
application after emergence but before yellow nutsedge, annual sedge, and Canada thistle are 8 inches tall. Annual broad leaf weeds should be no taller
than 4 inches. Thorough spray coverage of yellow nutsedge is essential for maximum control. For best control, do not mow within 3 days before or after
application. For sedges, do not mow within 5 days of application. Use a minimum water volume of 1 gallon per 1,000 square feet.
Precaution: When treating turfgrass with Broadloom Sedge Control, avoid spraying over the top of adjacent ornamental trees, shrubs, or flowers unless
otherwise specified in this label.
Restrictions
* Do not apply Broadloom Sedge Control to turf that has been under stress (drought, cold temperature or injury from other herbicides or pesticides).
* Do not apply to golf course greens or collars.
* Do not apply Broadloom Sedge Control to any newly seeded or newly sprigged turf until seedlings or sprigs are well established, as injury may result.
In perennial ryegrass, apply no more than 0.75 fluid ounces per 1,000 square feet (2 pints per acre) at one time and make subsequent applications no
less than 21 days later..
* Do not apply more than 1.5 fluid ounces of Broadloom Sedge Control per 1,000 square feet (4 pints per acre) in one season.
* Do not apply more than a total of 1 pound of active ingredient per acre per application or 2 pounds of active ingredient per acre per season. One pint
of Broadloom Sedge Control contains 0.5 pound of bentazon.
* Do not apply more than a total of 0.367 ounces of active ingredient per 1,000 square feet per application or 0.73 ounce of active ingredient per 1,000
square feet per season.
One fluid ounce of Broadloom Sedge Control contains 0.5 ounce of bentazon.
Rainfall or sprinkler irrigation within 8 hours after application may reduce the effectiveness of Bentazon sedge control.
Ornamentals
Apply Broadloom Sedge Control as a directed spray around all ornamental plants except sycamore and rhododendron.
Rate and Timing of Application
Directions for Use
Apply Broadloom Sedge Control at the rates listed in Table 1 when weeds are actively growing and before they reach the maximum size listed. For best
results apply early (exception: yellow nutsedge and Canada thistle.) Delaying application permits weeds to exceed the maximum size stated and will result
in inadequate control.
One fluid ounce of Broadloom Sedge Control contains 0.5 ounce of bentazon.
Precautions: Rainfall or overhead irrigation within 8 hours after application may reduce the effectiveness of Broadloom Sedge Control
Restrictions
* Do not apply Broadloom Sedge Control to plants that have been subject to stress conditions (such as hail damage, flooding, drought, extreme heat, or
widely fluctuating temperatures) as injury may result.
* Do not apply oil concentrate in tank mix with Broadloom Sedge Control over the top of ornamentals.
* Do not cultivate or mow within 5 days before or after applying Broadloom Sedge Control.
* Do not apply Broadloom Sedge Control to plants showing injury produced by any other herbicide applications, because this injury may be enhanced or
prolonged.
* Do not apply more than 1.5 fluid ounces of Broadloom Sedge Control per 1,000 sq. feet in any 12 month period.
* Do not apply more than a total of 1 pound of active ingredient per acre per application or 2 pounds of active ingredient per acre per season. One pint
of Broadloom Sedge Control contains 0.5 pound of bentazon.
* Do not apply more than a total of 0.367 ounces of active ingredient per 1,000 square feet per application or 0.73 fl. oz. of active ingredient per 1,000
square feet per season.
* DO NOT apply oil concentrate in tank mix with Broadloom Sedge Control over the top of ornamentals.
Because of the variability within species, in application technique, and manner of use, neither the manufacturer nor the Seller has determined whether
Broadloom Sedge Control can be safely used on all ornamental plants under all conditions. It is recommended therefore, that the user determine if Broadloom Sedge Control can be used safely prior to broad use. Test Broadloom Sedge Control on a small number of plants of that species and observe for 2
weeks.
HomeandGardenSupplyOur staff has over 100 years of experience with pest control, lawn & garden, turf, and pet products. We realize the importance of customer relationships and strive for your 100% satisfaction through unmatched service and quality in our products.
We work directly with our manufacturers to bring the lowest possible prices on the highest quality products in the industry.
Our products are sold throughout the world and it is impossible to know every licensing restriction, licensing requirement, product registration, etc. for every Country, State, County, Municipality, Province, etc.. It is the sole responsibility of the purchaser and the end user to provide a license, permit, registration etc. if requested by that purchasers local or state authorities. Please check and abide by all of the labels instructions when using the products.
We welcome all inquiries regarding bulk purchases.
- All orders shipped the same or next business day.
- Standard shipping for domestic orders will be FedEx or USPS. We will only ship to the address provided during payment.
Thank you for your business!
| Brand: | Southern Ag |
|---|---|
| Isin: | ICWPA1E1XMTQ |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
Product Overview
Broadloom Sedge Control 16oz by Southern Ag
Broadloom Sedge Control is a postemergence herbicide for selective control of broad leaf weeds, annual sedges, and yellow nutsedge in the following
use sites:
* Established turf grass * Ornamentals
Broadloom Sedge Control does not control grasses. Broadloom Sedge Control is effective mainly through contact action; thorough coverage of weeds is
critical for control.
Turf grass and Ornamentals Tolerance
All labeled plants are tolerant to Broadloom Sedge Control. Leaf speckling or bronzing may occur, but plants generally outgrow this condition within 10
days. New growth will be normal and plant vigor will not be reduced.
APPLICATION INSTRUCTIONS
Apply early postemergence to actively growing weeds as broadcast, band, or spot spray applications at the rates and growth stages listed in the weed
table. For best results make postemergence applications of Broadloom Sedge Control early when weeds are small. Early application provides best weed
control (exceptions: yellow nutsedge and Canada thistle), allows use of the lower rate (depending on weed species), and makes thorough spray coverage
easier. Delaying application allows weeds to exceed the maximum size stated and will prevent adequate control. Do not apply when conditions favor drift
from target area or when windspeed is greater than 10 mph.
Spray Coverage - Weeds must be thoroughly covered with spray. Dense leaf canopies shelter smaller weeds and can prevent adequate spray coverage.
Cultivation - Do not cultivate within 5 days before applying Broadloom Sedge Control or 7 days after application. Timely cultivation after 7 days may help
provide season-long control.
Sprayer Equipment - Apply Broadloom Sedge Control with handheld pump-up and knapsack sprayers, or hose-end type sprayers.
Cleaning Spray Equipment
Clean application equipment thoroughly particularly if the herbicide previously used has the potential to injure turf grass or ornamentals. Use a strong detergent or commercial sprayer cleaner according to the manufacturer’s directions and then triple rinsing the equipment before and after applying this product.
Application Mixing Instructions
Fill a thoroughly clean spray tank 1/2 to 2/3 full of clean water. Add Broadloom Sedge Control and shake or stir the spray solution to mix thoroughly. Add
the remaining volume of water and shake or stir the spray solution to mix thoroughly. Mix only enough spray solution for one use. Use a fresh spray mixture
for each application.
Apply Broadloom Sedge Control with a minimum water volume of 1 gallon per 1,000 sq. ft. and a minimum spray pressure of 40 psi (measured at the
boom, not at the pump or in the line).
Addition of Oil Concentrate
A nonphytotoxic oil concentrate may be added to the spray tank for certain weed problems. The oil concentrate must contain either a petroleum-oil or
vegetable-oil base and must meet all the following criteria: nonphytotoxic
contain only EPA-exempt ingredients
provide good mixing quality in the jar test (see below)
successful in local experience
The exact composition of suitable products will vary; however, vegetable-oil and petroleum- oil concentrates should contain emulsifiers which provide good
mixing quality. Highly refined vegetable oils are more satisfactory than unrefined vegetable oils.
Adding an oil concentrate may cause some leaf burn, but new growth is normal and crop vigor will not be reduced. There is a greater potential for leaf
burn when relative humidity and temperature are high. Some oil concentrates cause excessive leaf burn, so refer to your supplier for information concerning successful local experience before purchasing any oil concentrate.
Application Mixing Instructions with Oil Concentrate
Fill a thoroughly clean spray tank 1/2 to 2/3 full with clean water. Add Broadloom Sedge Control and shake or stir the spray solution so that Broadloom
Sedge Control and water mix thoroughly. Add the oil concentrate and the remaining volume of water. Again, shake or stir the spray solution so the Broadloom Herbicide, oil concentrate, and water mix thoroughly. Mix only enough spray solution for one use; use a fresh spray mixture for each application.
Rate of Oil Concentrate
For 1.0 to 2.0 gallons of water volume per 1,000 sq. ft., use 0.75 fl. oz. (5 teaspoons) of oil concentrate or a proportionate amount for other-sized areas.
Precautions
* Rainfall or sprinkler irrigation within 8 hours after application may nullify the effectiveness of Broadloom Sedge Control.
Restrictions
* DO NOT apply more than 1 lb. active ingredient per acre in a single application, or more than a total of 2 Ibs. active ingredient (bentazon) per acre per
season.
* DO NOT apply more than a total of 1.5 fl. ozs. of Broadloom Sedge Control per 1,000 sq. ft. per calendar year.
* Do not apply during windy conditions because spray drift may cause damage to adjacent desired ornamental plants.
* DO NOT cultivate or mow within five days before or after a Broadloom Sedge Control application.
* DO NOT apply Broadloom Sedge Control plus oil concentrate in combination with other pesticides whose labels indicate they may not be used with oil
adjuvants.
* DO NOT apply Broadloom Sedge Control during prolonged periods of drought or during unseasonably cold weather because unsatisfactory weed
control may result.
Table 1. Weeds Controlled
Broadloom Sedge Control Apply
ESTABLISHED TURFGRASS
Product Information
Use Broadloom Sedge Control on established bluegrass, fescue, bentgrass, Bermudagrass, bahiagrass, centipedegrass, zoysiagrass, ryegrass, and St.
Augustinegrass. Broadloom Sedge Control provides selective postemergence control of broad leaf weeds, annual sedges, and yellow nutsedge. Broadloom Sedge Control does not control grasses. Broadloom Sedge Control is effective mainly through contact; therefore, all plants must be thoroughly
covered with spray.
Application Information
Apply Broadloom Sedge Control postemergence to actively growing weeds under good soil moisture conditions.
Yellow Nutsedge Control - If desired control of yellow nutsedge or Canada thistle is not obtained with the first application, make a second application 10-14
days later or when new growth appears. In the northern United States, yellow nutsedge can emerge from May through July, while in the southern United
States, nutsedge and broad leaf weeds can emerge throughout the year. Always plan initial applications when most plants have emerged. If new plants
emerge later in the season, make a second application of Broadloom Sedge Control according to the label directions. In unmowed turf, make the first
application after emergence but before yellow nutsedge, annual sedge, and Canada thistle are 8 inches tall. Annual broad leaf weeds should be no taller
than 4 inches. Thorough spray coverage of yellow nutsedge is essential for maximum control. For best control, do not mow within 3 days before or after
application. For sedges, do not mow within 5 days of application. Use a minimum water volume of 1 gallon per 1,000 square feet.
Precaution: When treating turfgrass with Broadloom Sedge Control, avoid spraying over the top of adjacent ornamental trees, shrubs, or flowers unless
otherwise specified in this label.
Restrictions
* Do not apply Broadloom Sedge Control to turf that has been under stress (drought, cold temperature or injury from other herbicides or pesticides).
* Do not apply to golf course greens or collars.
* Do not apply Broadloom Sedge Control to any newly seeded or newly sprigged turf until seedlings or sprigs are well established, as injury may result.
In perennial ryegrass, apply no more than 0.75 fluid ounces per 1,000 square feet (2 pints per acre) at one time and make subsequent applications no
less than 21 days later..
* Do not apply more than 1.5 fluid ounces of Broadloom Sedge Control per 1,000 square feet (4 pints per acre) in one season.
* Do not apply more than a total of 1 pound of active ingredient per acre per application or 2 pounds of active ingredient per acre per season. One pint
of Broadloom Sedge Control contains 0.5 pound of bentazon.
* Do not apply more than a total of 0.367 ounces of active ingredient per 1,000 square feet per application or 0.73 ounce of active ingredient per 1,000
square feet per season.
One fluid ounce of Broadloom Sedge Control contains 0.5 ounce of bentazon.
Rainfall or sprinkler irrigation within 8 hours after application may reduce the effectiveness of Bentazon sedge control.
Ornamentals
Apply Broadloom Sedge Control as a directed spray around all ornamental plants except sycamore and rhododendron.
Rate and Timing of Application
Directions for Use
Apply Broadloom Sedge Control at the rates listed in Table 1 when weeds are actively growing and before they reach the maximum size listed. For best
results apply early (exception: yellow nutsedge and Canada thistle.) Delaying application permits weeds to exceed the maximum size stated and will result
in inadequate control.
One fluid ounce of Broadloom Sedge Control contains 0.5 ounce of bentazon.
Precautions: Rainfall or overhead irrigation within 8 hours after application may reduce the effectiveness of Broadloom Sedge Control
Restrictions
* Do not apply Broadloom Sedge Control to plants that have been subject to stress conditions (such as hail damage, flooding, drought, extreme heat, or
widely fluctuating temperatures) as injury may result.
* Do not apply oil concentrate in tank mix with Broadloom Sedge Control over the top of ornamentals.
* Do not cultivate or mow within 5 days before or after applying Broadloom Sedge Control.
* Do not apply Broadloom Sedge Control to plants showing injury produced by any other herbicide applications, because this injury may be enhanced or
prolonged.
* Do not apply more than 1.5 fluid ounces of Broadloom Sedge Control per 1,000 sq. feet in any 12 month period.
* Do not apply more than a total of 1 pound of active ingredient per acre per application or 2 pounds of active ingredient per acre per season. One pint
of Broadloom Sedge Control contains 0.5 pound of bentazon.
* Do not apply more than a total of 0.367 ounces of active ingredient per 1,000 square feet per application or 0.73 fl. oz. of active ingredient per 1,000
square feet per season.
* DO NOT apply oil concentrate in tank mix with Broadloom Sedge Control over the top of ornamentals.
Because of the variability within species, in application technique, and manner of use, neither the manufacturer nor the Seller has determined whether
Broadloom Sedge Control can be safely used on all ornamental plants under all conditions. It is recommended therefore, that the user determine if Broadloom Sedge Control can be used safely prior to broad use. Test Broadloom Sedge Control on a small number of plants of that species and observe for 2
weeks.
HomeandGardenSupplyOur staff has over 100 years of experience with pest control, lawn & garden, turf, and pet products. We realize the importance of customer relationships and strive for your 100% satisfaction through unmatched service and quality in our products.
We work directly with our manufacturers to bring the lowest possible prices on the highest quality products in the industry.
Our products are sold throughout the world and it is impossible to know every licensing restriction, licensing requirement, product registration, etc. for every Country, State, County, Municipality, Province, etc.. It is the sole responsibility of the purchaser and the end user to provide a license, permit, registration etc. if requested by that purchasers local or state authorities. Please check and abide by all of the labels instructions when using the products.
We welcome all inquiries regarding bulk purchases.
- All orders shipped the same or next business day.
- Standard shipping for domestic orders will be FedEx or USPS. We will only ship to the address provided during payment.
Thank you for your business!
| Brand: | Southern Ag |
|---|---|
| Isin: | ICWPA1E1XMTQ |
Broadloom Sedge Control 16oz by Southern Ag
Broadloom Sedge Control is a postemergence herbicide for selective control of broad leaf weeds, annual sedges, and yellow nutsedge in the following
use sites:
* Established turf grass * Ornamentals
Broadloom Sedge Control does not control grasses. Broadloom Sedge Control is effective mainly through contact action; thorough coverage of weeds is
critical for control.
Turf grass and Ornamentals Tolerance
All labeled plants are tolerant to Broadloom Sedge Control. Leaf speckling or bronzing may occur, but plants generally outgrow this condition within 10
days. New growth will be normal and plant vigor will not be reduced.
APPLICATION INSTRUCTIONS
Apply early postemergence to actively growing weeds as broadcast, band, or spot spray applications at the rates and growth stages listed in the weed
table. For best results make postemergence applications of Broadloom Sedge Control early when weeds are small. Early application provides best weed
control (exceptions: yellow nutsedge and Canada thistle), allows use of the lower rate (depending on weed species), and makes thorough spray coverage
easier. Delaying application allows weeds to exceed the maximum size stated and will prevent adequate control. Do not apply when conditions favor drift
from target area or when windspeed is greater than 10 mph.
Spray Coverage - Weeds must be thoroughly covered with spray. Dense leaf canopies shelter smaller weeds and can prevent adequate spray coverage.
Cultivation - Do not cultivate within 5 days before applying Broadloom Sedge Control or 7 days after application. Timely cultivation after 7 days may help
provide season-long control.
Sprayer Equipment - Apply Broadloom Sedge Control with handheld pump-up and knapsack sprayers, or hose-end type sprayers.
Cleaning Spray Equipment
Clean application equipment thoroughly particularly if the herbicide previously used has the potential to injure turf grass or ornamentals. Use a strong detergent or commercial sprayer cleaner according to the manufacturer’s directions and then triple rinsing the equipment before and after applying this product.
Application Mixing Instructions
Fill a thoroughly clean spray tank 1/2 to 2/3 full of clean water. Add Broadloom Sedge Control and shake or stir the spray solution to mix thoroughly. Add
the remaining volume of water and shake or stir the spray solution to mix thoroughly. Mix only enough spray solution for one use. Use a fresh spray mixture
for each application.
Apply Broadloom Sedge Control with a minimum water volume of 1 gallon per 1,000 sq. ft. and a minimum spray pressure of 40 psi (measured at the
boom, not at the pump or in the line).
Addition of Oil Concentrate
A nonphytotoxic oil concentrate may be added to the spray tank for certain weed problems. The oil concentrate must contain either a petroleum-oil or
vegetable-oil base and must meet all the following criteria: nonphytotoxic
contain only EPA-exempt ingredients
provide good mixing quality in the jar test (see below)
successful in local experience
The exact composition of suitable products will vary; however, vegetable-oil and petroleum- oil concentrates should contain emulsifiers which provide good
mixing quality. Highly refined vegetable oils are more satisfactory than unrefined vegetable oils.
Adding an oil concentrate may cause some leaf burn, but new growth is normal and crop vigor will not be reduced. There is a greater potential for leaf
burn when relative humidity and temperature are high. Some oil concentrates cause excessive leaf burn, so refer to your supplier for information concerning successful local experience before purchasing any oil concentrate.
Application Mixing Instructions with Oil Concentrate
Fill a thoroughly clean spray tank 1/2 to 2/3 full with clean water. Add Broadloom Sedge Control and shake or stir the spray solution so that Broadloom
Sedge Control and water mix thoroughly. Add the oil concentrate and the remaining volume of water. Again, shake or stir the spray solution so the Broadloom Herbicide, oil concentrate, and water mix thoroughly. Mix only enough spray solution for one use; use a fresh spray mixture for each application.
Rate of Oil Concentrate
For 1.0 to 2.0 gallons of water volume per 1,000 sq. ft., use 0.75 fl. oz. (5 teaspoons) of oil concentrate or a proportionate amount for other-sized areas.
Precautions
* Rainfall or sprinkler irrigation within 8 hours after application may nullify the effectiveness of Broadloom Sedge Control.
Restrictions
* DO NOT apply more than 1 lb. active ingredient per acre in a single application, or more than a total of 2 Ibs. active ingredient (bentazon) per acre per
season.
* DO NOT apply more than a total of 1.5 fl. ozs. of Broadloom Sedge Control per 1,000 sq. ft. per calendar year.
* Do not apply during windy conditions because spray drift may cause damage to adjacent desired ornamental plants.
* DO NOT cultivate or mow within five days before or after a Broadloom Sedge Control application.
* DO NOT apply Broadloom Sedge Control plus oil concentrate in combination with other pesticides whose labels indicate they may not be used with oil
adjuvants.
* DO NOT apply Broadloom Sedge Control during prolonged periods of drought or during unseasonably cold weather because unsatisfactory weed
control may result.
Table 1. Weeds Controlled
Broadloom Sedge Control Apply
ESTABLISHED TURFGRASS
Product Information
Use Broadloom Sedge Control on established bluegrass, fescue, bentgrass, Bermudagrass, bahiagrass, centipedegrass, zoysiagrass, ryegrass, and St.
Augustinegrass. Broadloom Sedge Control provides selective postemergence control of broad leaf weeds, annual sedges, and yellow nutsedge. Broadloom Sedge Control does not control grasses. Broadloom Sedge Control is effective mainly through contact; therefore, all plants must be thoroughly
covered with spray.
Application Information
Apply Broadloom Sedge Control postemergence to actively growing weeds under good soil moisture conditions.
Yellow Nutsedge Control - If desired control of yellow nutsedge or Canada thistle is not obtained with the first application, make a second application 10-14
days later or when new growth appears. In the northern United States, yellow nutsedge can emerge from May through July, while in the southern United
States, nutsedge and broad leaf weeds can emerge throughout the year. Always plan initial applications when most plants have emerged. If new plants
emerge later in the season, make a second application of Broadloom Sedge Control according to the label directions. In unmowed turf, make the first
application after emergence but before yellow nutsedge, annual sedge, and Canada thistle are 8 inches tall. Annual broad leaf weeds should be no taller
than 4 inches. Thorough spray coverage of yellow nutsedge is essential for maximum control. For best control, do not mow within 3 days before or after
application. For sedges, do not mow within 5 days of application. Use a minimum water volume of 1 gallon per 1,000 square feet.
Precaution: When treating turfgrass with Broadloom Sedge Control, avoid spraying over the top of adjacent ornamental trees, shrubs, or flowers unless
otherwise specified in this label.
Restrictions
* Do not apply Broadloom Sedge Control to turf that has been under stress (drought, cold temperature or injury from other herbicides or pesticides).
* Do not apply to golf course greens or collars.
* Do not apply Broadloom Sedge Control to any newly seeded or newly sprigged turf until seedlings or sprigs are well established, as injury may result.
In perennial ryegrass, apply no more than 0.75 fluid ounces per 1,000 square feet (2 pints per acre) at one time and make subsequent applications no
less than 21 days later..
* Do not apply more than 1.5 fluid ounces of Broadloom Sedge Control per 1,000 square feet (4 pints per acre) in one season.
* Do not apply more than a total of 1 pound of active ingredient per acre per application or 2 pounds of active ingredient per acre per season. One pint
of Broadloom Sedge Control contains 0.5 pound of bentazon.
* Do not apply more than a total of 0.367 ounces of active ingredient per 1,000 square feet per application or 0.73 ounce of active ingredient per 1,000
square feet per season.
One fluid ounce of Broadloom Sedge Control contains 0.5 ounce of bentazon.
Rainfall or sprinkler irrigation within 8 hours after application may reduce the effectiveness of Bentazon sedge control.
Ornamentals
Apply Broadloom Sedge Control as a directed spray around all ornamental plants except sycamore and rhododendron.
Rate and Timing of Application
Directions for Use
Apply Broadloom Sedge Control at the rates listed in Table 1 when weeds are actively growing and before they reach the maximum size listed. For best
results apply early (exception: yellow nutsedge and Canada thistle.) Delaying application permits weeds to exceed the maximum size stated and will result
in inadequate control.
One fluid ounce of Broadloom Sedge Control contains 0.5 ounce of bentazon.
Precautions: Rainfall or overhead irrigation within 8 hours after application may reduce the effectiveness of Broadloom Sedge Control
Restrictions
* Do not apply Broadloom Sedge Control to plants that have been subject to stress conditions (such as hail damage, flooding, drought, extreme heat, or
widely fluctuating temperatures) as injury may result.
* Do not apply oil concentrate in tank mix with Broadloom Sedge Control over the top of ornamentals.
* Do not cultivate or mow within 5 days before or after applying Broadloom Sedge Control.
* Do not apply Broadloom Sedge Control to plants showing injury produced by any other herbicide applications, because this injury may be enhanced or
prolonged.
* Do not apply more than 1.5 fluid ounces of Broadloom Sedge Control per 1,000 sq. feet in any 12 month period.
* Do not apply more than a total of 1 pound of active ingredient per acre per application or 2 pounds of active ingredient per acre per season. One pint
of Broadloom Sedge Control contains 0.5 pound of bentazon.
* Do not apply more than a total of 0.367 ounces of active ingredient per 1,000 square feet per application or 0.73 fl. oz. of active ingredient per 1,000
square feet per season.
* DO NOT apply oil concentrate in tank mix with Broadloom Sedge Control over the top of ornamentals.
Because of the variability within species, in application technique, and manner of use, neither the manufacturer nor the Seller has determined whether
Broadloom Sedge Control can be safely used on all ornamental plants under all conditions. It is recommended therefore, that the user determine if Broadloom Sedge Control can be used safely prior to broad use. Test Broadloom Sedge Control on a small number of plants of that species and observe for 2
weeks.
Our staff has over 100 years of experience with pest control, lawn & garden, turf, and pet products. We realize the importance of customer relationships and strive for your 100% satisfaction through unmatched service and quality in our products.
We work directly with our manufacturers to bring the lowest possible prices on the highest quality products in the industry.
Our products are sold throughout the world and it is impossible to know every licensing restriction, licensing requirement, product registration, etc. for every Country, State, County, Municipality, Province, etc.. It is the sole responsibility of the purchaser and the end user to provide a license, permit, registration etc. if requested by that purchasers local or state authorities. Please check and abide by all of the labels instructions when using the products.
We welcome all inquiries regarding bulk purchases.
- All orders shipped the same or next business day.
- Standard shipping for domestic orders will be FedEx or USPS. We will only ship to the address provided during payment.
Thank you for your business!
- Number in Pack: 1
- MPN: 722
- Form: Liquid
- Weed Type: Nutgrass, Nutsedge
- Prevention: Up to 6 Months
- Item Weight: 16 oz
- Certification Required: No
- EPA Registration Number: 70506-306-829
- Brand: Southern Ag
- Area of Use: Lawn
- Indoor/Outdoor: Outdoor
- Type: Concentrated
- Pest Type: Broadleaf Weeds, Nutsedge
- UPC: 051538198028
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.