South Bend Lathe Heavy 10 (Model 10L) - Rebuild Parts Kit Over 10,000 Sold!
$183.49
- Free US shipping
-
Arrives
Rebuild Kit for South Bend Lathe Model 10L or 10R (Heavy 10)
Made in USA by ILION Industrial Services, LLC
- Heavy 10-
Over the last 12 years we have sold over 10,000 of our high quality lathe rebuild kits to owners of vintage South Bend Lathes. Check out our customers' comments and feedback. For owners of the heavy 10 South Bends who need to disassemble and refurbish their machine, this aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original condition when you go to reassemble it. These parts were designed to provide and retain adequate lubrication in critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the headstock are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will not find a better quality replacement wick anywhere. The remaining apron wicks, gearbox wicks, wipers, and oil control plugs are all hard white felt, precision die cut for a consistent close fit on most all versions of the Southbend 10L lathe that were produced in large quantities from the late 1930's through the 1980’s. Parts are included that will fit the older single tumber quick change gearbox and the newer double tumbler gearbox. Now you don’t have to buy a whole yard of felt to get what you need and then waste time trying to cut and custom fit the individual parts to your lathe. We’ve done all of the work for you. These kits are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a complete kit for your lathe while they last. This kit is for the 10L or 10R only so if you have a 10k or "light 10" workshop lathe, please see our other auctions for those kits. Email us if you have other questions, Thanks!
Included In The "Heavy 10" Kit
- 2 Precision Spring Loaded Capillary oil wicks 2.125" long, .40" diameter.
- 2 Die cut bed wipers for the tailstock
- Die cut hard felt "donut" oil wick for the tailstock quill screw
- Die cut rubber bumper washer for the tailstock quill screw
- Die Cut Apron Clutch Gasket
- Apron Oil Trough Wicks
- 4 Die Cut Way Wipers for the Saddle.
- Round felt wick for the Reversing Gears
- Various rectangual felts for shaft lubrication.
- Complete set of Felts for the Quick Change Gear Box (Shafts, Bosses, and Oil Passages)
Transaction Information
- Free Shipping by USPS First Class Mail to any US address.
- If you have any questions, please don’t hesitate to contact me. I will be happy to answer any questions.
- Thanks for your consideration.
Disclaimer: ILION Industrial Services, LLC is neither affiliated with South Bend Lathe, Inc nor successor companies and makes no claims as such. Any information or product offered through this manual is done so in good faith in order to assist vintage machinery owners and is not sanctioned by South Bend Lathe, Inc. as OEM information, parts or products. ILION Industrial Services, LLC makes no warranty and accepts no liability for injury, property damage or any other costs incurred and/or damages suffered (including direct, indirect or consequential damage or damages, as well as loss of income or profits) as a result of the use of any information or product contained or referenced herein. By the purchase and/or use of the information or products referenced in this document, the user expressly accepts these terms and conditions.
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
Rebuild Kit for South Bend Lathe Model 10L or 10R (Heavy 10)
Made in USA by ILION Industrial Services, LLC
- Heavy 10-
Over the last 12 years we have sold over 10,000 of our high quality lathe rebuild kits to owners of vintage South Bend Lathes. Check out our customers' comments and feedback. For owners of the heavy 10 South Bends who need to disassemble and refurbish their machine, this aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original condition when you go to reassemble it. These parts were designed to provide and retain adequate lubrication in critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the headstock are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will not find a better quality replacement wick anywhere. The remaining apron wicks, gearbox wicks, wipers, and oil control plugs are all hard white felt, precision die cut for a consistent close fit on most all versions of the Southbend 10L lathe that were produced in large quantities from the late 1930's through the 1980’s. Parts are included that will fit the older single tumber quick change gearbox and the newer double tumbler gearbox. Now you don’t have to buy a whole yard of felt to get what you need and then waste time trying to cut and custom fit the individual parts to your lathe. We’ve done all of the work for you. These kits are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a complete kit for your lathe while they last. This kit is for the 10L or 10R only so if you have a 10k or "light 10" workshop lathe, please see our other auctions for those kits. Email us if you have other questions, Thanks!
Included In The "Heavy 10" Kit
- 2 Precision Spring Loaded Capillary oil wicks 2.125" long, .40" diameter.
- 2 Die cut bed wipers for the tailstock
- Die cut hard felt "donut" oil wick for the tailstock quill screw
- Die cut rubber bumper washer for the tailstock quill screw
- Die Cut Apron Clutch Gasket
- Apron Oil Trough Wicks
- 4 Die Cut Way Wipers for the Saddle.
- Round felt wick for the Reversing Gears
- Various rectangual felts for shaft lubrication.
- Complete set of Felts for the Quick Change Gear Box (Shafts, Bosses, and Oil Passages)
Transaction Information
- Free Shipping by USPS First Class Mail to any US address.
- If you have any questions, please don’t hesitate to contact me. I will be happy to answer any questions.
- Thanks for your consideration.
Disclaimer: ILION Industrial Services, LLC is neither affiliated with South Bend Lathe, Inc nor successor companies and makes no claims as such. Any information or product offered through this manual is done so in good faith in order to assist vintage machinery owners and is not sanctioned by South Bend Lathe, Inc. as OEM information, parts or products. ILION Industrial Services, LLC makes no warranty and accepts no liability for injury, property damage or any other costs incurred and/or damages suffered (including direct, indirect or consequential damage or damages, as well as loss of income or profits) as a result of the use of any information or product contained or referenced herein. By the purchase and/or use of the information or products referenced in this document, the user expressly accepts these terms and conditions.
Rebuild Kit for South Bend Lathe Model 10L or 10R (Heavy 10)
Made in USA by ILION Industrial Services, LLC
- Heavy 10-
Over the last 12 years we have sold over 10,000 of our high quality lathe rebuild kits to owners of vintage South Bend Lathes. Check out our customers' comments and feedback. For owners of the heavy 10 South Bends who need to disassemble and refurbish their machine, this aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original condition when you go to reassemble it. These parts were designed to provide and retain adequate lubrication in critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the headstock are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will not find a better quality replacement wick anywhere. The remaining apron wicks, gearbox wicks, wipers, and oil control plugs are all hard white felt, precision die cut for a consistent close fit on most all versions of the Southbend 10L lathe that were produced in large quantities from the late 1930's through the 1980’s. Parts are included that will fit the older single tumber quick change gearbox and the newer double tumbler gearbox. Now you don’t have to buy a whole yard of felt to get what you need and then waste time trying to cut and custom fit the individual parts to your lathe. We’ve done all of the work for you. These kits are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a complete kit for your lathe while they last. This kit is for the 10L or 10R only so if you have a 10k or "light 10" workshop lathe, please see our other auctions for those kits. Email us if you have other questions, Thanks!
Included In The "Heavy 10" Kit
- 2 Precision Spring Loaded Capillary oil wicks 2.125" long, .40" diameter.
- 2 Die cut bed wipers for the tailstock
- Die cut hard felt "donut" oil wick for the tailstock quill screw
- Die cut rubber bumper washer for the tailstock quill screw
- Die Cut Apron Clutch Gasket
- Apron Oil Trough Wicks
- 4 Die Cut Way Wipers for the Saddle.
- Round felt wick for the Reversing Gears
- Various rectangual felts for shaft lubrication.
- Complete set of Felts for the Quick Change Gear Box (Shafts, Bosses, and Oil Passages)
Transaction Information
- Free Shipping by USPS First Class Mail to any US address.
- If you have any questions, please don’t hesitate to contact me. I will be happy to answer any questions.
- Thanks for your consideration.
Disclaimer: ILION Industrial Services, LLC is neither affiliated with South Bend Lathe, Inc nor successor companies and makes no claims as such. Any information or product offered through this manual is done so in good faith in order to assist vintage machinery owners and is not sanctioned by South Bend Lathe, Inc. as OEM information, parts or products. ILION Industrial Services, LLC makes no warranty and accepts no liability for injury, property damage or any other costs incurred and/or damages suffered (including direct, indirect or consequential damage or damages, as well as loss of income or profits) as a result of the use of any information or product contained or referenced herein. By the purchase and/or use of the information or products referenced in this document, the user expressly accepts these terms and conditions.
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.99 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We may provide a return shipping label for your return. If the return is due to our error, such as receiving the wrong item, a damaged item, or a defective product, we will cover the return shipping cost.
If the return is due to the customer’s reason, such as ordering the wrong item, changing your mind, or no longer needing the item, the original shipping fee and the return label fee will be deducted from your refund amount.
If a return is sent back without prior contact or without using our provided label, we cannot be held responsible for any return shipping costs or delivery issues.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.