Skip to main content
SHARPERTEK CB750 CB900 GL1000 SHARPERTEK ULTRASONIC SONIC CLEANER SHELLAC BUSTER
next product image
previous product image

SHARPERTEK CB750 CB900 GL1000 SHARPERTEK ULTRASONIC SONIC CLEANER SHELLAC BUSTER 1 GAL

$216.28

  • Free US shipping

  • Arrives

Shellac Buster Never Dies!

When you need to remove hard buildups of varnish, shellac, rust, oil, paint, grease, dirt and grime in half the time of other formulas, SharperTek’s Shellac Buster ultrasonic cleaning solution fits the bill!

Shellac-Buster is a concentrated semi-aqueous, micro-emulsion solution that can be used as a pre-wash and is an excellent choice for removing heavy oil and water-based paints, ink, and adhesives. And as an added benefit, Shellac Buster never dies:

Just add more Shellac Buster or water to your tank to prolong it’s life
Clean dirty Shellac Buster by straining it through cheese cloth
Shellac Buster Keeps on going!

If you’re one of the many Small engine shops, vintage car repair facilities or motor cycle mechanics who are constantly running into tough to clean carburetor parts, then SharperTek’s Shellac Buster formula in your system will get you spending your time doing what really matters to your customers: fixing, rather than cleaning.

Brian Sims, chief mechanic and owner of Manx Motors in Auburn hills Michigan, let us know how SharperTek’s Shellac Buster really helps him with tough to clean carburetors. According to Brian, since the addition of ethanol to the nations fuel supply, fuel system problems in engines have been on the rise. “Nearly eighty percent of the machines we are servicing today are being serviced because of fuel system issues.” Says Brain. “Ethanol can really make a mess out of a carburetion system.” Brian added.

Ethanol, often made from corn sugars, is a colorless alcohol fuel that makes up 10 percent of the product dispensed at gasoline pumps. Ethanol tends to attract moisture over time, and this messes with small engine fuel systems like snow blowers and lawn mowers as well as the fuel systems in the engines of motorcycles and vintage cars. If gas is left in the machine too long, the carburetors get clogged with a crusty film that must be cleaned out, and in some cases the carburetor must be replaced entirely.
”The fuel goes bad quickly. It turns into varnish and shellac in the carburetor and the Shellac-Buster does a great job in cleaning it.” Brian said. “If left over a long period, gasoline, oil and ethanol will start separating from one another in the gas tank and the whole carburetor body of a smaller motor will start corroding. With oil sinking to the bottom, the engine may not get proper lubrication.” Brian added.

The Sharpertek’s Shellac-Buster has proven itself in hundreds of applications. Shellac Buster excels at removing powder coatings, e-coatings, epoxy systems, oil & water based paints, adhesives, inks and petroleum based products. Turpentine products will not harm alloys such as steel, aluminum, copper, magnesium, brass, and most plastic substrates and rubber.

Applications:

ENGINE AND CARBURETOR SHELLAC REMOVAL
 ENGINE AND CARBURETOR VARNISH REMOVAL
 ENGINE AND CARBURETOR CARBON REMOVAL
AUTO RESTORATION
CYLINDER STRIPPING
ADHESIVE REMOVAL
TANK CLEANING
DEGREASING & RUST REMOVAL
COATINGS REMOVAL
AIRCRAFT STRIPPING
E-COAT REMOVAL
PAINT OVERSPRAY
PAINT REMOVAL
POWDER COAT REMOVAL
RESIN REMOVAL
RUST REMOVAL

Isin:
I7SA7CK1CI25

$216.28

  • Free US shipping

  • Arrives

In Stock

Sold by , Fulfilled by IBSPOT • Ships from US

IBSPOT Buyer Protection
  • Free 30-Day Returns
  • Full Refund for Damaged or Incorrect Items
  • Guaranteed Delivery or Money Back
  • Secure Checkout & Fast Support
scroll to top arrow
SHARPERTEK CB750 CB900 GL1000 SHARPERTEK ULTRASONIC SONIC CLEANER SHELLAC BUSTER 1 GAL

SHARPERTEK CB750 CB900 GL1000 SHARPERTEK ULTRASONIC SONIC CLEANER SHELLAC BUS...

$216.28

Shellac Buster Never Dies!

When you need to remove hard buildups of varnish, shellac, rust, oil, paint, grease, dirt and grime in half the time of other formulas, SharperTek’s Shellac Buster ultrasonic cleaning solution fits the bill!

Shellac-Buster is a concentrated semi-aqueous, micro-emulsion solution that can be used as a pre-wash and is an excellent choice for removing heavy oil and water-based paints, ink, and adhesives. And as an added benefit, Shellac Buster never dies:

Just add more Shellac Buster or water to your tank to prolong it’s life
Clean dirty Shellac Buster by straining it through cheese cloth
Shellac Buster Keeps on going!

If you’re one of the many Small engine shops, vintage car repair facilities or motor cycle mechanics who are constantly running into tough to clean carburetor parts, then SharperTek’s Shellac Buster formula in your system will get you spending your time doing what really matters to your customers: fixing, rather than cleaning.

Brian Sims, chief mechanic and owner of Manx Motors in Auburn hills Michigan, let us know how SharperTek’s Shellac Buster really helps him with tough to clean carburetors. According to Brian, since the addition of ethanol to the nations fuel supply, fuel system problems in engines have been on the rise. “Nearly eighty percent of the machines we are servicing today are being serviced because of fuel system issues.” Says Brain. “Ethanol can really make a mess out of a carburetion system.” Brian added.

Ethanol, often made from corn sugars, is a colorless alcohol fuel that makes up 10 percent of the product dispensed at gasoline pumps. Ethanol tends to attract moisture over time, and this messes with small engine fuel systems like snow blowers and lawn mowers as well as the fuel systems in the engines of motorcycles and vintage cars. If gas is left in the machine too long, the carburetors get clogged with a crusty film that must be cleaned out, and in some cases the carburetor must be replaced entirely.
”The fuel goes bad quickly. It turns into varnish and shellac in the carburetor and the Shellac-Buster does a great job in cleaning it.” Brian said. “If left over a long period, gasoline, oil and ethanol will start separating from one another in the gas tank and the whole carburetor body of a smaller motor will start corroding. With oil sinking to the bottom, the engine may not get proper lubrication.” Brian added.

The Sharpertek’s Shellac-Buster has proven itself in hundreds of applications. Shellac Buster excels at removing powder coatings, e-coatings, epoxy systems, oil & water based paints, adhesives, inks and petroleum based products. Turpentine products will not harm alloys such as steel, aluminum, copper, magnesium, brass, and most plastic substrates and rubber.

Applications:

ENGINE AND CARBURETOR SHELLAC REMOVAL
 ENGINE AND CARBURETOR VARNISH REMOVAL
 ENGINE AND CARBURETOR CARBON REMOVAL
AUTO RESTORATION
CYLINDER STRIPPING
ADHESIVE REMOVAL
TANK CLEANING
DEGREASING & RUST REMOVAL
COATINGS REMOVAL
AIRCRAFT STRIPPING
E-COAT REMOVAL
PAINT OVERSPRAY
PAINT REMOVAL
POWDER COAT REMOVAL
RESIN REMOVAL
RUST REMOVAL

Isin:
I7SA7CK1CI25

Shellac Buster Never Dies!

When you need to remove hard buildups of varnish, shellac, rust, oil, paint, grease, dirt and grime in half the time of other formulas, SharperTek’s Shellac Buster ultrasonic cleaning solution fits the bill!

Shellac-Buster is a concentrated semi-aqueous, micro-emulsion solution that can be used as a pre-wash and is an excellent choice for removing heavy oil and water-based paints, ink, and adhesives. And as an added benefit, Shellac Buster never dies:

Just add more Shellac Buster or water to your tank to prolong it’s life
Clean dirty Shellac Buster by straining it through cheese cloth
Shellac Buster Keeps on going!

If you’re one of the many Small engine shops, vintage car repair facilities or motor cycle mechanics who are constantly running into tough to clean carburetor parts, then SharperTek’s Shellac Buster formula in your system will get you spending your time doing what really matters to your customers: fixing, rather than cleaning.

Brian Sims, chief mechanic and owner of Manx Motors in Auburn hills Michigan, let us know how SharperTek’s Shellac Buster really helps him with tough to clean carburetors. According to Brian, since the addition of ethanol to the nations fuel supply, fuel system problems in engines have been on the rise. “Nearly eighty percent of the machines we are servicing today are being serviced because of fuel system issues.” Says Brain. “Ethanol can really make a mess out of a carburetion system.” Brian added.

Ethanol, often made from corn sugars, is a colorless alcohol fuel that makes up 10 percent of the product dispensed at gasoline pumps. Ethanol tends to attract moisture over time, and this messes with small engine fuel systems like snow blowers and lawn mowers as well as the fuel systems in the engines of motorcycles and vintage cars. If gas is left in the machine too long, the carburetors get clogged with a crusty film that must be cleaned out, and in some cases the carburetor must be replaced entirely.
”The fuel goes bad quickly. It turns into varnish and shellac in the carburetor and the Shellac-Buster does a great job in cleaning it.” Brian said. “If left over a long period, gasoline, oil and ethanol will start separating from one another in the gas tank and the whole carburetor body of a smaller motor will start corroding. With oil sinking to the bottom, the engine may not get proper lubrication.” Brian added.

The Sharpertek’s Shellac-Buster has proven itself in hundreds of applications. Shellac Buster excels at removing powder coatings, e-coatings, epoxy systems, oil & water based paints, adhesives, inks and petroleum based products. Turpentine products will not harm alloys such as steel, aluminum, copper, magnesium, brass, and most plastic substrates and rubber.

Applications:

ENGINE AND CARBURETOR SHELLAC REMOVAL
 ENGINE AND CARBURETOR VARNISH REMOVAL
 ENGINE AND CARBURETOR CARBON REMOVAL
AUTO RESTORATION
CYLINDER STRIPPING
ADHESIVE REMOVAL
TANK CLEANING
DEGREASING & RUST REMOVAL
COATINGS REMOVAL
AIRCRAFT STRIPPING
E-COAT REMOVAL
PAINT OVERSPRAY
PAINT REMOVAL
POWDER COAT REMOVAL
RESIN REMOVAL
RUST REMOVAL
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: SHELLAC BUSTER
  • Brand: SHARPERTEK
  • UPC: Does not apply

Processing Time

  • We process and ship orders Monday through Friday, excluding holidays.
  • Most orders are processed within 1–3 business days, depending on product availability.
  • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

Shipping Coverage

We currently ship to addresses within the United States only.

Products may ship from:

  • Our U.S. warehouses, or
  • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

Each product page clearly displays the “Ships From” location before checkout.

Shipping Methods & Estimated Delivery

Shipping Method Estimated Delivery Cost
Free Shipping (US) 5–10 business days Free, available on eligible items
Standard Shipping (US to US by Item) 5–10 business days $5.95 for the first item, $3.00 each additional
Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
Extended Delivery (Ships from Overseas Warehouse) 10–20 business days $14.50 for the first item, $2.00 each additional

Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

Free Shipping

We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 

Carriers

We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.

Import Duties & Taxes

All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.

Tracking & Notifications

Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

You can track your shipment anytime using the Track Your Order page on our website.

Order Changes & Cancellations

If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

Contact: support@ibspot.com

Item Not Received

If your tracking number shows “Delivered” but you haven’t received your package:

  1. Check with your local USPS or UPS office.
  2. Confirm that the shipping address provided was correct.
  3. If the issue remains unresolved, contact support@ibspot.com for assistance.

Damaged or Lost Parcels

If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.

Customer Support

For any questions about shipping, tracking, or delivery, our customer support team is here to help.

Email: support@ibspot.com

We’re always happy to help.

Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.

Order Cancellation Policy

Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

How to Request a Cancellation

You can contact us through:

Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.

Return Policy

We accept returns for most items within 30 days of delivery for a full refund.

To be eligible for a return:

  • The item must be unused, in the same condition as received, and in its original packaging.
  • A tracking number must be provided to confirm the return shipment.

Non-Returnable Items

Certain products cannot be returned, including:

  • Perishable goods (for example, food, flowers, newspapers, magazines)
  • Intimate or sanitary goods
  • Hazardous materials or flammable liquids/gases
  • Gift cards
  • Downloadable software
  • Some health and personal care items

Partial Refunds (If Applicable)

Partial refunds may be granted in specific situations, such as:

  • Books with obvious signs of use
  • Opened CDs, DVDs, software, or vinyl records
  • Items not in their original condition, damaged, or missing parts not due to our error
  • Items returned more than 30 days after delivery

How to Return an Item

To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.

Shipping Cost for Returns

Please contact us before returning any item.
We will provide a free return shipping label.

If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.

Refund Processing

Once your return is received and inspected:

  • In-store returns are refunded to the original form of payment or issued as a gift card.
  • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

Please allow:

  • 5–7 business days for the return to reach our Returns Center.
  • An additional 3–10 business days for your bank to post the refund to your account.

Damages, Issues & Claims

Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.

Product Claims

Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.

Exchanges

We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.

Return Address

IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States

Customer Support

Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

Email: support@ibspot.com
Contact Form: Contact Us page

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Subscribe To Our Newsletter

Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.