Skip to main content

Prescolite 6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 - 277 Volt 4500

$120.53

  • Free US shipping
  • Arrives

6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 - 277 Volt 0-10V Dimming Option, Commercial Grade

******Note - if you buy more than one of these, the shipping quoted charged to you will probably actually be less than the actual price to me. I don't see any way to fix this, as, the shipping calculator adds to the weight as it should, but doesn't add to the dimensions. So, if you buy more than one I'll probably be requesting the difference in the shipping cost. Or, just send me a message beforehand letting me know how many that you want and I can make a separate listing with correct shipping dimensions.*****
These are new old stock, a couple are open box. Some of the boxes show storage wear. They're surplus from an electrical job at the local university.
These are 4500 lumen, 3500 Kelvin.
Ceiling Cutout: 61/4"
Maximum Ceiling Thickness 11/4"
If you're local to west Cincinnati, you can pick these up and save the shipping cost.
APPLICATIONS:
LiteFrame Commercial LC6HL is a 6" commercial grade high lumen LED downlight with two available outputs of 4500 and 6000 lumens. This is suitable to replace many HID downlighting applications, while realizing substantial energy and maintenance savings. Rated for a minimum of 50,000 hours life (70% lumen maintenance) with ambient plenum temperatures up to 35ºC (45L) and 30ºC (60L). Free Air Flow around fixture is required for optimal life performance. This product is not recommended for use with 3rd party "FIREHAT" or insulation barriers.

HOUSING:
One-piece 22 gauge non-corrosive steel platform. Pre-wired J-box with snap-on cover for easy access. Snap-in connection from driver compartment allows easy installation of light engine/trim assembly and can be upgraded to accommodate technology improvements. Approved for 8 (4 in/4 out) No. 12 AWG conductors rated for 90°C through wiring.

REFLECTOR:
High purity aluminum, Alzak, iridescence suppressed, semi-diffuse reflector. Self-trim standard. Painted white self-trim (WT) available as option.

LED LIGHT ENGINE:
The LC6HL uses high power Cree LEDs, specifically mixed to provide a minimum of 80 CRI with 3 SDCM color consistency. The use of multiple high power LEDs allows for optimal thermal management by effectively spreading the heat over a larger area and eliminating hot spots on the LEDs. A diffuse, yet highly transmissive lens obscures the view of the LEDs and creates a smooth, even look from below. The light engine is available in multiple Kelvin temperatures and the system is designed to provide optimal life and lumen maintenance (50,000 hours at 70% lumen maintenance). The reflector/light engine assembly is mechanically retained to the housing.
LED DRIVER:
The LC6HL utilizes a 95 watt constant current Philips Advance LED driver. This driver is capable of running all lumen outputs, resulting in a reduction of housing skus and simplified specification. The driver is UL8750 and Class II compliant.

DIMMING:
The LiteFrame Commercial HL series comes standard with 0-10V dimming down to 5%. For the sizing of the control circuit, the dimming circuit may require up to 2mA of sink current.

INSTALLATION:
Light commercial bar hangers included. Universal adjustable mounting brackets also accept ½" EMT conduit or 1½" or ¾" lathing channel (by others) or Prescolite 24" bar hangers (B24 or B6).

CERTIFICATIONS:
CSA certified to US and Canadian safety standards. Suitable for wet locations. Wall wash option is damp location rated only. Approved for through branch wiring. Non-IC rated. Product is marked spacing and must be installed with the following minimum spacings:Center to Center of adjacent luminaires: 24”Minimum Overhead Clearance: 8-1/2”(To bottom of metal pan)Center of Luminaire to Side of Building Member : 12”

Isin:
ITVVJNLE4VOL

$120.53

  • Free US shipping
  • Arrives

In Stock

Sold by , Fulfilled by IBSPOT • Ships from US

IBSPOT Buyer Protection
  • Free 30-Day Returns
  • Full Refund for Damaged or Incorrect Items
  • Guaranteed Delivery or Money Back
  • Secure Checkout & Fast Support
scroll to top arrow
Prescolite 6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 - 277 Volt 4500

Prescolite 6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 -...

$120.53

6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 - 277 Volt 0-10V Dimming Option, Commercial Grade

******Note - if you buy more than one of these, the shipping quoted charged to you will probably actually be less than the actual price to me. I don't see any way to fix this, as, the shipping calculator adds to the weight as it should, but doesn't add to the dimensions. So, if you buy more than one I'll probably be requesting the difference in the shipping cost. Or, just send me a message beforehand letting me know how many that you want and I can make a separate listing with correct shipping dimensions.*****
These are new old stock, a couple are open box. Some of the boxes show storage wear. They're surplus from an electrical job at the local university.
These are 4500 lumen, 3500 Kelvin.
Ceiling Cutout: 61/4"
Maximum Ceiling Thickness 11/4"
If you're local to west Cincinnati, you can pick these up and save the shipping cost.
APPLICATIONS:
LiteFrame Commercial LC6HL is a 6" commercial grade high lumen LED downlight with two available outputs of 4500 and 6000 lumens. This is suitable to replace many HID downlighting applications, while realizing substantial energy and maintenance savings. Rated for a minimum of 50,000 hours life (70% lumen maintenance) with ambient plenum temperatures up to 35ºC (45L) and 30ºC (60L). Free Air Flow around fixture is required for optimal life performance. This product is not recommended for use with 3rd party "FIREHAT" or insulation barriers.

HOUSING:
One-piece 22 gauge non-corrosive steel platform. Pre-wired J-box with snap-on cover for easy access. Snap-in connection from driver compartment allows easy installation of light engine/trim assembly and can be upgraded to accommodate technology improvements. Approved for 8 (4 in/4 out) No. 12 AWG conductors rated for 90°C through wiring.

REFLECTOR:
High purity aluminum, Alzak, iridescence suppressed, semi-diffuse reflector. Self-trim standard. Painted white self-trim (WT) available as option.

LED LIGHT ENGINE:
The LC6HL uses high power Cree LEDs, specifically mixed to provide a minimum of 80 CRI with 3 SDCM color consistency. The use of multiple high power LEDs allows for optimal thermal management by effectively spreading the heat over a larger area and eliminating hot spots on the LEDs. A diffuse, yet highly transmissive lens obscures the view of the LEDs and creates a smooth, even look from below. The light engine is available in multiple Kelvin temperatures and the system is designed to provide optimal life and lumen maintenance (50,000 hours at 70% lumen maintenance). The reflector/light engine assembly is mechanically retained to the housing.
LED DRIVER:
The LC6HL utilizes a 95 watt constant current Philips Advance LED driver. This driver is capable of running all lumen outputs, resulting in a reduction of housing skus and simplified specification. The driver is UL8750 and Class II compliant.

DIMMING:
The LiteFrame Commercial HL series comes standard with 0-10V dimming down to 5%. For the sizing of the control circuit, the dimming circuit may require up to 2mA of sink current.

INSTALLATION:
Light commercial bar hangers included. Universal adjustable mounting brackets also accept ½" EMT conduit or 1½" or ¾" lathing channel (by others) or Prescolite 24" bar hangers (B24 or B6).

CERTIFICATIONS:
CSA certified to US and Canadian safety standards. Suitable for wet locations. Wall wash option is damp location rated only. Approved for through branch wiring. Non-IC rated. Product is marked spacing and must be installed with the following minimum spacings:Center to Center of adjacent luminaires: 24”Minimum Overhead Clearance: 8-1/2”(To bottom of metal pan)Center of Luminaire to Side of Building Member : 12”

Isin:
ITVVJNLE4VOL

6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 - 277 Volt 0-10V Dimming Option, Commercial Grade

******Note - if you buy more than one of these, the shipping quoted charged to you will probably actually be less than the actual price to me. I don't see any way to fix this, as, the shipping calculator adds to the weight as it should, but doesn't add to the dimensions. So, if you buy more than one I'll probably be requesting the difference in the shipping cost. Or, just send me a message beforehand letting me know how many that you want and I can make a separate listing with correct shipping dimensions.*****

These are new old stock, a couple are open box. Some of the boxes show storage wear. They're surplus from an electrical job at the local university.

These are 4500 lumen, 3500 Kelvin.

Ceiling Cutout: 61/4"
Maximum Ceiling Thickness 11/4"

If you're local to west Cincinnati, you can pick these up and save the shipping cost.

APPLICATIONS:
LiteFrame Commercial LC6HL is a 6" commercial grade high lumen LED downlight with two available outputs of 4500 and 6000 lumens. This is suitable to replace many HID downlighting applications, while realizing substantial energy and maintenance savings. Rated for a minimum of 50,000 hours life (70% lumen maintenance) with ambient plenum temperatures up to 35ºC (45L) and 30ºC (60L). Free Air Flow around fixture is required for optimal life performance. This product is not recommended for use with 3rd party "FIREHAT" or insulation barriers.

HOUSING:
One-piece 22 gauge non-corrosive steel platform. Pre-wired J-box with snap-on cover for easy access. Snap-in connection from driver compartment allows easy installation of light engine/trim assembly and can be upgraded to accommodate technology improvements. Approved for 8 (4 in/4 out) No. 12 AWG conductors rated for 90°C through wiring.

REFLECTOR:
High purity aluminum, Alzak, iridescence suppressed, semi-diffuse reflector. Self-trim standard. Painted white self-trim (WT) available as option.

LED LIGHT ENGINE:
The LC6HL uses high power Cree LEDs, specifically mixed to provide a minimum of 80 CRI with 3 SDCM color consistency. The use of multiple high power LEDs allows for optimal thermal management by effectively spreading the heat over a larger area and eliminating hot spots on the LEDs. A diffuse, yet highly transmissive lens obscures the view of the LEDs and creates a smooth, even look from below. The light engine is available in multiple Kelvin temperatures and the system is designed to provide optimal life and lumen maintenance (50,000 hours at 70% lumen maintenance). The reflector/light engine assembly is mechanically retained to the housing.

LED DRIVER:
The LC6HL utilizes a 95 watt constant current Philips Advance LED driver. This driver is capable of running all lumen outputs, resulting in a reduction of housing skus and simplified specification. The driver is UL8750 and Class II compliant.

DIMMING:
The LiteFrame Commercial HL series comes standard with 0-10V dimming down to 5%. For the sizing of the control circuit, the dimming circuit may require up to 2mA of sink current.

INSTALLATION:
Light commercial bar hangers included. Universal adjustable mounting brackets also accept ½" EMT conduit or 1½" or ¾" lathing channel (by others) or Prescolite 24" bar hangers (B24 or B6).

CERTIFICATIONS:
CSA certified to US and Canadian safety standards. Suitable for wet locations. Wall wash option is damp location rated only. Approved for through branch wiring. Non-IC rated. Product is marked spacing and must be installed with the following minimum spacings:Center to Center of adjacent luminaires: 24”Minimum Overhead Clearance: 8-1/2”(To bottom of metal pan)Center of Luminaire to Side of Building Member : 12”





  • Modified Item: No
  • Country/Region of Manufacture: Mexico
  • MPN: 6LCHL45L35KBBL 6LCHL Commercial Grade
  • Brand: Prescolite
  • UPC: Does not apply

Processing Time

  • We process and ship orders Monday through Friday, excluding holidays.
  • Most orders are processed within 1–3 business days, depending on product availability.
  • Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.

Shipping Coverage

We currently ship to addresses within the United States only.

Products may ship from:

  • Our U.S. warehouses, or
  • Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).

Each product page clearly displays the “Ships From” location before checkout.


Shipping Methods & Estimated Delivery

Shipping Method Estimated Delivery Cost
Free Shipping (US) 5–10 business days Free, available on eligible items
Standard Shipping (US to US by Item) 5–10 business days $5.95 for the first item, $3.00 each additional
Standard Shipping (From US Warehouse by Weight) 3–7 business days Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb.
Extended Delivery (Ships from Overseas Warehouse) 10–20 business days $14.50 for the first item, $2.00 each additional

Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.

Free Shipping

We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout. 


Carriers

We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.


Import Duties & Taxes

All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.


Tracking & Notifications

Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.

You can track your shipment anytime using the Track Your Order page on our website.


Order Changes & Cancellations

If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.

Contact: support@ibspot.com


Item Not Received

If your tracking number shows “Delivered” but you haven’t received your package:

  1. Check with your local USPS or UPS office.
  2. Confirm that the shipping address provided was correct.
  3. If the issue remains unresolved, contact support@ibspot.com for assistance.

Damaged or Lost Parcels

If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.


Customer Support

For any questions about shipping, tracking, or delivery, our customer support team is here to help.

Email: support@ibspot.com

We’re always happy to help.

Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.


Order Cancellation Policy

Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.

How to Request a Cancellation

You can contact us through:

Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.


Return Policy

We accept returns for most items within 30 days of delivery for a full refund.

To be eligible for a return:

  • The item must be unused, in the same condition as received, and in its original packaging.
  • A tracking number must be provided to confirm the return shipment.

Non-Returnable Items

Certain products cannot be returned, including:

  • Perishable goods (for example, food, flowers, newspapers, magazines)
  • Intimate or sanitary goods
  • Hazardous materials or flammable liquids/gases
  • Gift cards
  • Downloadable software
  • Some health and personal care items

Partial Refunds (If Applicable)

Partial refunds may be granted in specific situations, such as:

  • Books with obvious signs of use
  • Opened CDs, DVDs, software, or vinyl records
  • Items not in their original condition, damaged, or missing parts not due to our error
  • Items returned more than 30 days after delivery

How to Return an Item

To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.


Shipping Cost for Returns

Please contact us before returning any item.
We will provide a free return shipping label.

If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.

For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.


Refund Processing

Once your return is received and inspected:

  • In-store returns are refunded to the original form of payment or issued as a gift card.
  • Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.

Please allow:

  • 5–7 business days for the return to reach our Returns Center.
  • An additional 3–10 business days for your bank to post the refund to your account.

Damages, Issues & Claims

Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.

Product Claims

Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.


Exchanges

We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.


Return Address

IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States


Customer Support

Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.

Email: support@ibspot.com
Contact Form: Contact Us page

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Subscribe To Our Newsletter

Disclaimer: Statements made, or products sold through this website, have not been evaluated by the United States Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.