Oracal/Avery Save a biker,open your FU*king Eyes,In 20+Colors,Safe
$23.49
- Free US shipping
-
Arrives
Save a biker,open your Fucking Eyes and get off your phone. Safety,Motorcycle ,Bike,HOG,MSF,Vinyl Decal
SIZE IS Aprox 5"x6" If you need a different size please ask.
Color will be WHITE unless specified.Leave your color choice in the sellers notes please.
Decal is VinylCut so it will be one single color, but is available in
WHITE,BLACK, ROYAL BLUE, PINK, RED, HUNTERS ORANGE, NEON GREEN, DARK GREEN,GOLD, and SILVER.
Please specifycolor..
The vinyl is3MIL, resistant to Sun, Rain, Snow & Sleet. The decal will stick toany hard, smooth surface and are suitable for wet locations (Boat, Car, CarWindow, Laptop, Instrument Cases, Snowboard Decks, School Lockers, Mirrors,etc.)
An application (transfertape) overlay allows for precise and easy placement.
All decals arecomputer cut and are customizable.
HOW TO APPLY
STEP 1: CLEAN THAT AREA GOOD!
First make sure youhave a dry place and no wind to install your decal.
Make sure to prep thearea, this is the most important part of installing a decal! If you putyour decal or sticker on a dirty surface, it will just pick that dirt and grimeup like a lint roller does your shirt, those aren't so sticky after you usethem are they! So let’s make sure the area is nice and clean so that itcan adhere to where you are going to place it.
You can use soap and water, rubbing alcohol, or any other fast dryingcleaner. My favorite is rubbing alcohol since it dries by itself withinseconds and leaves no residue behind. On that note, do NOT use anythinglike Windex or other household spray cleaners that leave a residue behind oroily substance, that defeats the purpose and will cause your decal/sticker notto adhere to the best of it capabilities.
STEP 2: DECIDE AND PEEL!
After you have cleanedyour car, you now need to decide where you want to center your decal in thearea you cleaned. I use a measuring tape to measure from different spotson the car to make sure I have it exactly where I want it and that it willnot turn out crooked. When I measure I use a piece of masking tape tomark the measurements, normally four for left/right/top/bottom. Then Ihave a somewhat boxed area to force me to place the decal where it should go.
Be aware after you stick it, you might cannot undo itand use it again, since it can separate the design or text from each other.After you decide where you want it, go ahead and start to peel your decal back,if it doesn't stick to the transfer tape the first pull, replace the transfertape and push it together with your fingers or use a credit card to presstogether.
STEP 3: PLACE THAT DECAL!
So you cleaned yourarea and also decided how and where you are going to place your new decal orsticker and you made sure your decal can peel apart easily.
FOR SMALLER DECALS -
Now fully peel thedecal off the backing and hold it on the tips of the masking/transfertape. Try not to touch the back of the decal itself since it could leavedirt on your decals back side.
You should have each hand holding the furthest corners from each other and keepit tight so that the decal does not fold in on itself. Place one end ofthe decal down and then smooth it out to the other end till the decal is fullyplaced.
FOR BIGGER DECALS -
Do not fully removethe backing on your decal. You will want to remove about 1/3 of thebacking and start by applying that 1/3 of the decal to the car. Thenslowly pull more of the backing off while at the same time apply the decal tothe car until you have fully installed the decal. Either work left toright or right to left, which ever you feel best doing.
Don't forget you can always buy a $1 spray bottle at your dollar store, put ONEsmall drop of soap in it and fill with water and shake. Then LIGHTLY (IMEAN LIGHTLY) spray the area and then apply the decal. This is onlysuggest for bigger decals or decals that you need to be in a precise area.
STEP 3: THE HARDESTPART!
Waiting... yes this isthe hardest part, because most people are so impatient that they can't wait andthey mess up the decal by removing the transfer tape too early!
The best way to allow your decal to dry is out in the sun, having it in theshade or in a cool place will only make it take longer. If you used amist of soapy water when installing your decal and do not let the sun dry it,then it will take a very long time before it adheres correctly, since nothingis there to remove the water and dry the decal to the surface.
Do not try and rush this buy using a heat gun, you can melt the transfer tapeand vinyl and when you peel it, it could cause the decal to stretch with thetransfer tape. Again the best way is the sun. Finally just give the decal30 minutes before you remove the transfer tape, go inside and eat lunch. By the time you’re done you should be able to go back outside and finish yourdecal and be in a good mood from that great lunch and nice cold sweettea! If your decal is still not sticking, make sure you got it in the sunand it is warm outside, and just give it a bit longer.
After ~30 minutes todry, remove transfer paper.
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
Save a biker,open your Fucking Eyes and get off your phone. Safety,Motorcycle ,Bike,HOG,MSF,Vinyl Decal
SIZE IS Aprox 5"x6" If you need a different size please ask.
Color will be WHITE unless specified.Leave your color choice in the sellers notes please.
Decal is VinylCut so it will be one single color, but is available in
WHITE,BLACK, ROYAL BLUE, PINK, RED, HUNTERS ORANGE, NEON GREEN, DARK GREEN,GOLD, and SILVER.
Please specifycolor..
The vinyl is3MIL, resistant to Sun, Rain, Snow & Sleet. The decal will stick toany hard, smooth surface and are suitable for wet locations (Boat, Car, CarWindow, Laptop, Instrument Cases, Snowboard Decks, School Lockers, Mirrors,etc.)
An application (transfertape) overlay allows for precise and easy placement.
All decals arecomputer cut and are customizable.
HOW TO APPLY
STEP 1: CLEAN THAT AREA GOOD!
First make sure youhave a dry place and no wind to install your decal.
Make sure to prep thearea, this is the most important part of installing a decal! If you putyour decal or sticker on a dirty surface, it will just pick that dirt and grimeup like a lint roller does your shirt, those aren't so sticky after you usethem are they! So let’s make sure the area is nice and clean so that itcan adhere to where you are going to place it.
You can use soap and water, rubbing alcohol, or any other fast dryingcleaner. My favorite is rubbing alcohol since it dries by itself withinseconds and leaves no residue behind. On that note, do NOT use anythinglike Windex or other household spray cleaners that leave a residue behind oroily substance, that defeats the purpose and will cause your decal/sticker notto adhere to the best of it capabilities.
STEP 2: DECIDE AND PEEL!
After you have cleanedyour car, you now need to decide where you want to center your decal in thearea you cleaned. I use a measuring tape to measure from different spotson the car to make sure I have it exactly where I want it and that it willnot turn out crooked. When I measure I use a piece of masking tape tomark the measurements, normally four for left/right/top/bottom. Then Ihave a somewhat boxed area to force me to place the decal where it should go.
Be aware after you stick it, you might cannot undo itand use it again, since it can separate the design or text from each other.After you decide where you want it, go ahead and start to peel your decal back,if it doesn't stick to the transfer tape the first pull, replace the transfertape and push it together with your fingers or use a credit card to presstogether.
STEP 3: PLACE THAT DECAL!
So you cleaned yourarea and also decided how and where you are going to place your new decal orsticker and you made sure your decal can peel apart easily.
FOR SMALLER DECALS -
Now fully peel thedecal off the backing and hold it on the tips of the masking/transfertape. Try not to touch the back of the decal itself since it could leavedirt on your decals back side.
You should have each hand holding the furthest corners from each other and keepit tight so that the decal does not fold in on itself. Place one end ofthe decal down and then smooth it out to the other end till the decal is fullyplaced.
FOR BIGGER DECALS -
Do not fully removethe backing on your decal. You will want to remove about 1/3 of thebacking and start by applying that 1/3 of the decal to the car. Thenslowly pull more of the backing off while at the same time apply the decal tothe car until you have fully installed the decal. Either work left toright or right to left, which ever you feel best doing.
Don't forget you can always buy a $1 spray bottle at your dollar store, put ONEsmall drop of soap in it and fill with water and shake. Then LIGHTLY (IMEAN LIGHTLY) spray the area and then apply the decal. This is onlysuggest for bigger decals or decals that you need to be in a precise area.
STEP 3: THE HARDESTPART!
Waiting... yes this isthe hardest part, because most people are so impatient that they can't wait andthey mess up the decal by removing the transfer tape too early!
The best way to allow your decal to dry is out in the sun, having it in theshade or in a cool place will only make it take longer. If you used amist of soapy water when installing your decal and do not let the sun dry it,then it will take a very long time before it adheres correctly, since nothingis there to remove the water and dry the decal to the surface.
Do not try and rush this buy using a heat gun, you can melt the transfer tapeand vinyl and when you peel it, it could cause the decal to stretch with thetransfer tape. Again the best way is the sun. Finally just give the decal30 minutes before you remove the transfer tape, go inside and eat lunch. By the time you’re done you should be able to go back outside and finish yourdecal and be in a good mood from that great lunch and nice cold sweettea! If your decal is still not sticking, make sure you got it in the sunand it is warm outside, and just give it a bit longer.
After ~30 minutes todry, remove transfer paper.
Save a biker,open your Fucking Eyes and get off your phone. Safety,Motorcycle ,Bike,HOG,MSF,Vinyl Decal
SIZE IS Aprox 5"x6" If you need a different size please ask.
Color will be WHITE unless specified.Leave your color choice in the sellers notes please.
Decal is VinylCut so it will be one single color, but is available in
WHITE,BLACK, ROYAL BLUE, PINK, RED, HUNTERS ORANGE, NEON GREEN, DARK GREEN,GOLD, and SILVER.
Please specifycolor..
The vinyl is3MIL, resistant to Sun, Rain, Snow & Sleet. The decal will stick toany hard, smooth surface and are suitable for wet locations (Boat, Car, CarWindow, Laptop, Instrument Cases, Snowboard Decks, School Lockers, Mirrors,etc.)
An application (transfertape) overlay allows for precise and easy placement.
All decals arecomputer cut and are customizable.
HOW TO APPLY
STEP 1: CLEAN THAT AREA GOOD!
First make sure youhave a dry place and no wind to install your decal.
Make sure to prep thearea, this is the most important part of installing a decal! If you putyour decal or sticker on a dirty surface, it will just pick that dirt and grimeup like a lint roller does your shirt, those aren't so sticky after you usethem are they! So let’s make sure the area is nice and clean so that itcan adhere to where you are going to place it.
You can use soap and water, rubbing alcohol, or any other fast dryingcleaner. My favorite is rubbing alcohol since it dries by itself withinseconds and leaves no residue behind. On that note, do NOT use anythinglike Windex or other household spray cleaners that leave a residue behind oroily substance, that defeats the purpose and will cause your decal/sticker notto adhere to the best of it capabilities.
STEP 2: DECIDE AND PEEL!
After you have cleanedyour car, you now need to decide where you want to center your decal in thearea you cleaned. I use a measuring tape to measure from different spotson the car to make sure I have it exactly where I want it and that it willnot turn out crooked. When I measure I use a piece of masking tape tomark the measurements, normally four for left/right/top/bottom. Then Ihave a somewhat boxed area to force me to place the decal where it should go.
Be aware after you stick it, you might cannot undo itand use it again, since it can separate the design or text from each other.After you decide where you want it, go ahead and start to peel your decal back,if it doesn't stick to the transfer tape the first pull, replace the transfertape and push it together with your fingers or use a credit card to presstogether.
STEP 3: PLACE THAT DECAL!
So you cleaned yourarea and also decided how and where you are going to place your new decal orsticker and you made sure your decal can peel apart easily.
FOR SMALLER DECALS -
Now fully peel thedecal off the backing and hold it on the tips of the masking/transfertape. Try not to touch the back of the decal itself since it could leavedirt on your decals back side.
You should have each hand holding the furthest corners from each other and keepit tight so that the decal does not fold in on itself. Place one end ofthe decal down and then smooth it out to the other end till the decal is fullyplaced.
FOR BIGGER DECALS -
Do not fully removethe backing on your decal. You will want to remove about 1/3 of thebacking and start by applying that 1/3 of the decal to the car. Thenslowly pull more of the backing off while at the same time apply the decal tothe car until you have fully installed the decal. Either work left toright or right to left, which ever you feel best doing.
Don't forget you can always buy a $1 spray bottle at your dollar store, put ONEsmall drop of soap in it and fill with water and shake. Then LIGHTLY (IMEAN LIGHTLY) spray the area and then apply the decal. This is onlysuggest for bigger decals or decals that you need to be in a precise area.
STEP 3: THE HARDESTPART!
Waiting... yes this isthe hardest part, because most people are so impatient that they can't wait andthey mess up the decal by removing the transfer tape too early!
The best way to allow your decal to dry is out in the sun, having it in theshade or in a cool place will only make it take longer. If you used amist of soapy water when installing your decal and do not let the sun dry it,then it will take a very long time before it adheres correctly, since nothingis there to remove the water and dry the decal to the surface.
Do not try and rush this buy using a heat gun, you can melt the transfer tapeand vinyl and when you peel it, it could cause the decal to stretch with thetransfer tape. Again the best way is the sun. Finally just give the decal30 minutes before you remove the transfer tape, go inside and eat lunch. By the time you’re done you should be able to go back outside and finish yourdecal and be in a good mood from that great lunch and nice cold sweettea! If your decal is still not sticking, make sure you got it in the sunand it is warm outside, and just give it a bit longer.
After ~30 minutes todry, remove transfer paper.
Item Specifics
- Primary Color: White
- Brand: Oracal/Avery
- Type: Decal/Sticker
- Manufacturer Part Number: 444
- Dimensions: 5"x6"
- Theme: Motorcycle
- Material: Vinyl
- Country/Region of Manufacture: United States
- Finish: Glossy, Matte
- Suitable For: Car, Caravan, Motorcycle, Trailer, Van, Vehicle Windows
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.