OBDResource TPMS Reset Tool TPMS Relearn For Ford GM EL-50448 Auto Tire Pressure Monitor US
$56.69
- Free US shipping
-
Arrives
2IN1 TPMS Relearn Tool Super EL50448 for GM and Ford Tire Pressure Monitor Sensor TPMS Reset Tool 2024 Edition
9V Battery needed , not in package, need to prepare that yourself.
For Ford
For GM
How to change between GM and Ford Model ?
2 in 1 TPMS Tool: Super EL50448 works as both EL-50448 series and EL-50449 Ford Series TPMS19 tire sensor reset tool.
Wide Vehicle Coverage: tps relearn tool work on most General Motors /Ford/Buick/Cadillac/Chevrolet/ /Lincoln/Mercury equipped tpms tire pressure monitor system can be reset.
Easy to Use: Super EL-50448 TPMS activation tool with ease, faster operation, activates the individual TPMS sensors by pressing one button.
How to Use: Ensure that the vehicle is in the relearn mode, and following the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress press button while holding the tool against the tire sidewall.
Notice: [1] When using tpms relearn tool Ford, please make sure antenna in correct position; [ 2] And 9V battery should be in good condition, new and fully charged
Car Tyre Pressure Monitor Sensor Reset Automotive TPMS Relearn Tool 2 in 1 for and Ford Series Vehicles TPM Learning
2 in 1 TPMS Tool: Super EL50448 works as both EL-50448 series and TPMS19 tire sensor reset tool. Equipped with 315 or 433 MHz, need it when change new sensors or do tire rotation.
Warmly Notice
9V battery shold be in good condition: New & fully charged.
Make sure antenna fits in CORRECT position.
Do tire reset outside instead of in the garage.
Position of tires are also important, front tires have to be straight.
Sensors should be original / OEM sensors which are already well programmed.
Be sure all other sensors are out of range of vehicle antenna (10 ft range min).
Disable all other WIFI/Bluetooth and electronic accessory devices. Includs HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
When You Need This Tire Relearn Tool?
New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.
Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.
When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.
Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems solved, TPMS needs to be reset.
Exchanging the winter tires or Summer tires.
Applicable Models:
(Equipped with 315/433 MHz, It won't work if you've purchased aftermarket sensors with wrong frequency.)
How to switch between and Ford brand?
>>Hold power button for 5 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times. How to detect which mode the device in? >>Press power button, if Green LED flashing means tire reset tool in mode, if Yellow LED flashing, means Super EL50448 in Ford mode.
How to use Super EL50448?
Need 1x Pc 9V battery to work (Not included in this parcel) 1. Set the car in TPMS learning mode. (car horns twice) 2. Starting relearn process from left front tire, point antenna on correct position. Press & release power button. Once the speaker chirped, move to the next tire. 3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left. 4. After all sensors reseted, the car horns twice means TPMS re-learn finished.
How to set my car in TPMS re-learn mode?
***For series vehicles***1. Make the gear in P position. 2. Use cruise to choose TPMS re-learn mode in the dashboard settings. 3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
***For Ford series vehicles***1. Make the gear in P position. 2. With the ignition switch to OFF, press and release the brake pedal 3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position 4. Depress and release the brake pedal 5. Ignition to OFF position 6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position 7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
Packing List
1pc * Super EL50448 TPMS Reset Tool
1pc * English User Manual
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
2IN1 TPMS Relearn Tool Super EL50448 for GM and Ford Tire Pressure Monitor Sensor TPMS Reset Tool 2024 Edition
9V Battery needed , not in package, need to prepare that yourself.
For Ford
For GM
How to change between GM and Ford Model ?
2 in 1 TPMS Tool: Super EL50448 works as both EL-50448 series and EL-50449 Ford Series TPMS19 tire sensor reset tool.
Wide Vehicle Coverage: tps relearn tool work on most General Motors /Ford/Buick/Cadillac/Chevrolet/ /Lincoln/Mercury equipped tpms tire pressure monitor system can be reset.
Easy to Use: Super EL-50448 TPMS activation tool with ease, faster operation, activates the individual TPMS sensors by pressing one button.
How to Use: Ensure that the vehicle is in the relearn mode, and following the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress press button while holding the tool against the tire sidewall.
Notice: [1] When using tpms relearn tool Ford, please make sure antenna in correct position; [ 2] And 9V battery should be in good condition, new and fully charged
Car Tyre Pressure Monitor Sensor Reset Automotive TPMS Relearn Tool 2 in 1 for and Ford Series Vehicles TPM Learning
2 in 1 TPMS Tool: Super EL50448 works as both EL-50448 series and TPMS19 tire sensor reset tool. Equipped with 315 or 433 MHz, need it when change new sensors or do tire rotation.
Warmly Notice
9V battery shold be in good condition: New & fully charged.
Make sure antenna fits in CORRECT position.
Do tire reset outside instead of in the garage.
Position of tires are also important, front tires have to be straight.
Sensors should be original / OEM sensors which are already well programmed.
Be sure all other sensors are out of range of vehicle antenna (10 ft range min).
Disable all other WIFI/Bluetooth and electronic accessory devices. Includs HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
When You Need This Tire Relearn Tool?
New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.
Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.
When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.
Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems solved, TPMS needs to be reset.
Exchanging the winter tires or Summer tires.
Applicable Models:
(Equipped with 315/433 MHz, It won't work if you've purchased aftermarket sensors with wrong frequency.)
How to switch between and Ford brand?
>>Hold power button for 5 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times. How to detect which mode the device in? >>Press power button, if Green LED flashing means tire reset tool in mode, if Yellow LED flashing, means Super EL50448 in Ford mode.
How to use Super EL50448?
Need 1x Pc 9V battery to work (Not included in this parcel) 1. Set the car in TPMS learning mode. (car horns twice) 2. Starting relearn process from left front tire, point antenna on correct position. Press & release power button. Once the speaker chirped, move to the next tire. 3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left. 4. After all sensors reseted, the car horns twice means TPMS re-learn finished.
How to set my car in TPMS re-learn mode?
***For series vehicles***1. Make the gear in P position. 2. Use cruise to choose TPMS re-learn mode in the dashboard settings. 3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
***For Ford series vehicles***1. Make the gear in P position. 2. With the ignition switch to OFF, press and release the brake pedal 3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position 4. Depress and release the brake pedal 5. Ignition to OFF position 6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position 7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
Packing List
1pc * Super EL50448 TPMS Reset Tool
1pc * English User Manual
2IN1 TPMS Relearn Tool Super EL50448 for GM and Ford Tire Pressure Monitor Sensor TPMS Reset Tool 2024 Edition
9V Battery needed , not in package, need to prepare that yourself.
For Ford
For GM
How to change between GM and Ford Model ?
2 in 1 TPMS Tool: Super EL50448 works as both EL-50448 series and EL-50449 Ford Series TPMS19 tire sensor reset tool.
Wide Vehicle Coverage: tps relearn tool work on most General Motors /Ford/Buick/Cadillac/Chevrolet/ /Lincoln/Mercury equipped tpms tire pressure monitor system can be reset.
Easy to Use: Super EL-50448 TPMS activation tool with ease, faster operation, activates the individual TPMS sensors by pressing one button.
How to Use: Ensure that the vehicle is in the relearn mode, and following the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress press button while holding the tool against the tire sidewall.
Notice: [1] When using tpms relearn tool Ford, please make sure antenna in correct position; [ 2] And 9V battery should be in good condition, new and fully charged
Car Tyre Pressure Monitor Sensor Reset Automotive TPMS Relearn Tool 2 in 1 for and Ford Series Vehicles TPM Learning
2 in 1 TPMS Tool: Super EL50448 works as both EL-50448 series and TPMS19 tire sensor reset tool. Equipped with 315 or 433 MHz, need it when change new sensors or do tire rotation.
Warmly Notice
9V battery shold be in good condition: New & fully charged.
Make sure antenna fits in CORRECT position.
Do tire reset outside instead of in the garage.
Position of tires are also important, front tires have to be straight.
Sensors should be original / OEM sensors which are already well programmed.
Be sure all other sensors are out of range of vehicle antenna (10 ft range min).
Disable all other WIFI/Bluetooth and electronic accessory devices. Includs HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
When You Need This Tire Relearn Tool?
New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.
Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.
When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.
Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems solved, TPMS needs to be reset.
Exchanging the winter tires or Summer tires.
Applicable Models:
(Equipped with 315/433 MHz, It won't work if you've purchased aftermarket sensors with wrong frequency.)
How to switch between and Ford brand?
>>Hold power button for 5 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times. How to detect which mode the device in? >>Press power button, if Green LED flashing means tire reset tool in mode, if Yellow LED flashing, means Super EL50448 in Ford mode.
How to use Super EL50448?
Need 1x Pc 9V battery to work (Not included in this parcel) 1. Set the car in TPMS learning mode. (car horns twice) 2. Starting relearn process from left front tire, point antenna on correct position. Press & release power button. Once the speaker chirped, move to the next tire. 3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left. 4. After all sensors reseted, the car horns twice means TPMS re-learn finished.
How to set my car in TPMS re-learn mode?
***For series vehicles***1. Make the gear in P position. 2. Use cruise to choose TPMS re-learn mode in the dashboard settings. 3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
***For Ford series vehicles***1. Make the gear in P position.
2. With the ignition switch to OFF, press and release the brake pedal
3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position
4. Depress and release the brake pedal
5. Ignition to OFF position
6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position
7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
Packing List
1pc * Super EL50448 TPMS Reset Tool
1pc * English User Manual
Condition
Brand
Car List
Electronic
External Testing Certification
Hardware Version
Item
Item Height
Item Length
Item Type
Item Weight
Item Width
Manufacturer Part Number
Material Type
Mhz
Model Name
OBD Interface
Power
Product
Software Version
Supported System
Type
Vehicle Type
Voltage
Warranty
UPC
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.99 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We may provide a return shipping label for your return. If the return is due to our error, such as receiving the wrong item, a damaged item, or a defective product, we will cover the return shipping cost.
If the return is due to the customer’s reason, such as ordering the wrong item, changing your mind, or no longer needing the item, the original shipping fee and the return label fee will be deducted from your refund amount.
If a return is sent back without prior contact or without using our provided label, we cannot be held responsible for any return shipping costs or delivery issues.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.