Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug
Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug
Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug
Product Overview
Nilight Magnetic LED Trailer Towing Light Kit
Nilight Magnetic LED Trailer Towing Light Kit have 26 diodes including 6 diodes for license plate light. Output super bright red, amber and white light. It comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light, 24ft cable to light with a Standard 7 Pin Plug, easy to use, plug in and go.
Specification:
- Working Voltage: DC 12V-24V
- LED Light Color: Red, Amber, White
- Number of LEDs: Left 16 Right 10 LED
- Dimensions: 4.31" x 3.94" x 1.56" (L X W X H)
- Connector: Standard 7 Pin Plug
- Cable Length Between Two Lamps: 7.75FT
- Cable Length From Lamps To Plug: 24FT
- Material:ABS Housing & PC Lens
- IP68 waterproof rate
- Lifespan: Over 50000 Hours
Wiring Guide:
If you don't have a 7pin connector, you can also use the hardwired method,
please cut off the 7 pin connector on the lights and hardwire it to your vehicle
- Black Wire: Running Light
- White Wire: Ground Wire
- Red Wire: Brake Light
- Yellow Wire: Left Turn Light
- Green Wire: Right Turn Light
NOTE:
- Not fit for 4 wire connect to 7-way round blade trailer adapter.
- Please check your trailer wiring plug connector before order. Thanks.
About this item
- 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation.
- Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights; Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc.
- Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible
- Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off.
Key Features
SUPER BRIGHT 26 LEDs26PCS led chips with clear transmittance PC cover output stable high brightness, emits amber, red and white 3 colors of light, has stop,Tail, Indicator & Fog Light Functions. Improve the drive security and avoid accidents. | Fully Sealed Waterproof DesignThe whole light adopts a sealed design to protect the light from damage in severe weather such as rainstorm and snowstorm. Enhance the waterproof ability of the light, and extend the lifespan. | Easy InstallationComes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle. Strong magnets can keep them running on rough roads without falling off. |
Multi-functions:
| Brand: | Nilight |
|---|---|
| Isin: | ISHO9SN0FVHL |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
Product Overview
Nilight Magnetic LED Trailer Towing Light Kit
Nilight Magnetic LED Trailer Towing Light Kit have 26 diodes including 6 diodes for license plate light. Output super bright red, amber and white light. It comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light, 24ft cable to light with a Standard 7 Pin Plug, easy to use, plug in and go.
Specification:
- Working Voltage: DC 12V-24V
- LED Light Color: Red, Amber, White
- Number of LEDs: Left 16 Right 10 LED
- Dimensions: 4.31" x 3.94" x 1.56" (L X W X H)
- Connector: Standard 7 Pin Plug
- Cable Length Between Two Lamps: 7.75FT
- Cable Length From Lamps To Plug: 24FT
- Material:ABS Housing & PC Lens
- IP68 waterproof rate
- Lifespan: Over 50000 Hours
Wiring Guide:
If you don't have a 7pin connector, you can also use the hardwired method,
please cut off the 7 pin connector on the lights and hardwire it to your vehicle
- Black Wire: Running Light
- White Wire: Ground Wire
- Red Wire: Brake Light
- Yellow Wire: Left Turn Light
- Green Wire: Right Turn Light
NOTE:
- Not fit for 4 wire connect to 7-way round blade trailer adapter.
- Please check your trailer wiring plug connector before order. Thanks.
About this item
- 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation.
- Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights; Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc.
- Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible
- Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off.
Key Features
SUPER BRIGHT 26 LEDs26PCS led chips with clear transmittance PC cover output stable high brightness, emits amber, red and white 3 colors of light, has stop,Tail, Indicator & Fog Light Functions. Improve the drive security and avoid accidents. | Fully Sealed Waterproof DesignThe whole light adopts a sealed design to protect the light from damage in severe weather such as rainstorm and snowstorm. Enhance the waterproof ability of the light, and extend the lifespan. | Easy InstallationComes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle. Strong magnets can keep them running on rough roads without falling off. |
Multi-functions:
| Brand: | Nilight |
|---|---|
| Isin: | ISHO9SN0FVHL |
Nilight Magnetic LED Trailer Towing Light Kit
Nilight Magnetic LED Trailer Towing Light Kit have 26 diodes including 6 diodes for license plate light. Output super bright red, amber and white light. It comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light, 24ft cable to light with a Standard 7 Pin Plug, easy to use, plug in and go.
Specification:
- Working Voltage: DC 12V-24V
- LED Light Color: Red, Amber, White
- Number of LEDs: Left 16 Right 10 LED
- Dimensions: 4.31" x 3.94" x 1.56" (L X W X H)
- Connector: Standard 7 Pin Plug
- Cable Length Between Two Lamps: 7.75FT
- Cable Length From Lamps To Plug: 24FT
- Material:ABS Housing & PC Lens
- IP68 waterproof rate
- Lifespan: Over 50000 Hours
Wiring Guide:
If you don't have a 7pin connector, you can also use the hardwired method,
please cut off the 7 pin connector on the lights and hardwire it to your vehicle
- Black Wire: Running Light
- White Wire: Ground Wire
- Red Wire: Brake Light
- Yellow Wire: Left Turn Light
- Green Wire: Right Turn Light
NOTE:
- Not fit for 4 wire connect to 7-way round blade trailer adapter.
- Please check your trailer wiring plug connector before order. Thanks.
About this item
- 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation.
- Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights; Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc.
- Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible
- Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off.
Key Features
|
|
|
|---|---|---|
SUPER BRIGHT 26 LEDs26PCS led chips with clear transmittance PC cover output stable high brightness, emits amber, red and white 3 colors of light, has stop,Tail, Indicator & Fog Light Functions. Improve the drive security and avoid accidents. | Fully Sealed Waterproof DesignThe whole light adopts a sealed design to protect the light from damage in severe weather such as rainstorm and snowstorm. Enhance the waterproof ability of the light, and extend the lifespan. | Easy InstallationComes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle. Strong magnets can keep them running on rough roads without falling off. |
Multi-functions:
- Connector: Standard 7 Pin Plug
- Automotive Fit Type : Universal Fit
- Placement on Vehicle: Rear
- Cable Length Between Two Lamps: 7.75FT
- Manufacturer Warranty: 2 Years
- Voltage: 12 Volts
- Features: Waterproof, Submersible
- Special Feature: Waterproof
- Lighting Technology: LED
- Package Dimensions: 9.8 x 6.97 x 3.62 inches
- Position: Rear
- Working Voltage: DC 12V-24V
- Manufacturer Part Number: TR-143
- Material: ABS Housing & PC Lens
- Brand: Nilight
- Type: Tail light
- Lens Material: Polycarbonate
- OE/OEM Part Number: TR-143
- Assembly Required: No
- the box: 2PCS Magnetic LED Trailer Towing Light Kit
- Housing Color: Black
- Cable Length From Lamps To Plug: 24FT
- Light Source Type: LED
- Lens Color: Red, Amber
- Country/Region of Manufacture: China
- Universal Fitment: Yes
- Lifespan: Over 50000 Hours
- Item Weight: 3.98 pounds
- UPC: 840323902298
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.