Nilight 2 Gang Rocker Switch Panel Green Backlit with USB Charger Voltmeter
Nilight 2 Gang Rocker Switch Panel Green Backlit with USB Charger Voltmeter
Nilight 2 Gang Rocker Switch Panel Green Backlit with USB Charger Voltmeter
Multi-Functional 2 Gang Switch Panel with USB Voltmeter
Dual USB Fast Charger+Voltmeter+2 Switches
Nilight 2 gang switch panels can be used to control LED light bars, LED work lights, rear lights, fog lamps, driving lights, headlights, taillights, off-road lights, auxiliary lights, boat light, etc.
Integrated with 4.8A dual USB charger and Voltmeter. Suitable for Cars, Trucks, Marine Boat, Yacht, Trailer, RV, Caravan, Camper, Bus, UTV /ATV, and Other 12-24 V Applications.
Equipped with a night glow sticker, you can define the name and assign switches according to your needs.
- Package Include:
- 1 x Multi functional 2 Gang switch panel
- 4 x Fixing screws
- 1 x DIY Sticker, 1x Nilight Glow Sticker
- Instructions
Specification
- Backlit: green
- Input voltage: 12V/24V DC
- Amp rating for each switch: 12V DC/20AMP; 24V DC/10AMP
- Switch Terminal: 5 PIN
- Dual USB: 4.8A; 2.4A each
- Voltmeter: 12V/24V DC
Nilight 2 Gang Rocker Switch Panel with USB Charger and Voltmeter
Input voltage: 12V/24V DC
Switch Terminal: 5 PIN
Installation: Panel Mount, Pre-wired
Nilight 2 gang switch panels can be used to control Underglow lights, whip lights, rock lights, LED light bars, LED work lights, rear lights, fog lamps, driving lights, headlights, taillights, off-road lights, auxiliary lights, boat lights, etc.
Equipped with a sticker, you can define the name and assign switches according to your needs. The product fits most cars, SUVs, ATVs, UTVs, 4X4, motorcycles, trucks, Wranglers, boats, yachts, and other off-road vehicles.
Note:
Amp rating for the Whole Switch Panel wired in series: 12V DC/20AMP; 24V DC/10AMP.
Please wire a relay if you are going to hook an accessory that is over 20AMP at a 12VDC power source. Or the switch will be burnt out due to its high current.
- multi-function designed: this switch panel is integrated with 2 rocker switches and 4.8a dual USB charger with voltmeter. suitable for most 12v-24v dc cars, UTVS/ATVS, trucks, trailers, RVS, caravans, buses, marine boats, yachts etc.
- efficient charge: dual usb charger enable you charge two devices simultaneously at full speed with 2.4a in each usb port. with a total power of 4.8a, it works for all usb-powered devices. makes the charger 40% faster than conventional chargers.
- led voltage display: the voltmeter is builted in the center of the usb charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles.
- quality assurance: the panel is made of strengthened aluminum and well-conductive pins,ensure long lasting durability highly optimized for general use and will give you a pleasant experience.
- package include:1x 2 gang switch panel,4 x fixing screws, 2 sets of DIY stickers.
- Fit type: Universal Fit
Product details
Durable ComponentsMade of ABS and PC of premium quality, the switch is impact and heat resistant and it's flexible for turning on or off. prolonging the device life. | Dual USB with VoltmeterA dual USB charger enables you to charge two devices simultaneously at full speed with 2.4A in each USB port. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.
| Premium Jumper WiresThe jumper wires are made of high quality 14 gauge wires. The Tin-plated copper terminals on the wire are of good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better. |
Features
Night Glow DIY StickerThe package comes with 132PCS night glow stickers with various patterns and words which meet your DIY needs and help you find the switch in the dark easily. | Pre-wired wiring harnessRocker switch panel with pre-wired wiring harness for you to easily install in both 12V and 24V vehicle, yacht, ship, caravan, truck, etc. | Easy DisconnectionThe wiring harness on the switch can be easily disconnected by pressing down the clips. |
Use on Marine BoatMarine-grade Construction and IP65 Waterproof: It adopts high-quality Aluminum panel, Scratch-proof, and Corrosion Resistant, with rubber sealed cap for all sockets dust-tight and debris-proof. | Wide ApplicationThe product is suitable for controlling all electronic equipment on board. Available for upgrading headlights switch, fog light switch, wide light switch, car refrigerator switch, car vacuum cleaner switch replacement. etc. | Car Electronic DeviceThe product is suitable for UTVs and ATVs. Installation is simple and can be mounted horizontally or vertically. You can even use it at -25°(Min) or 80°(max). Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc. |
| Brand: | Nilight |
|---|---|
| Isin: | IAJTHINWBIPU |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Multi-Functional 2 Gang Switch Panel with USB Voltmeter
Dual USB Fast Charger+Voltmeter+2 Switches
Nilight 2 gang switch panels can be used to control LED light bars, LED work lights, rear lights, fog lamps, driving lights, headlights, taillights, off-road lights, auxiliary lights, boat light, etc.
Integrated with 4.8A dual USB charger and Voltmeter. Suitable for Cars, Trucks, Marine Boat, Yacht, Trailer, RV, Caravan, Camper, Bus, UTV /ATV, and Other 12-24 V Applications.
Equipped with a night glow sticker, you can define the name and assign switches according to your needs.
- Package Include:
- 1 x Multi functional 2 Gang switch panel
- 4 x Fixing screws
- 1 x DIY Sticker, 1x Nilight Glow Sticker
- Instructions
Specification
- Backlit: green
- Input voltage: 12V/24V DC
- Amp rating for each switch: 12V DC/20AMP; 24V DC/10AMP
- Switch Terminal: 5 PIN
- Dual USB: 4.8A; 2.4A each
- Voltmeter: 12V/24V DC
Nilight 2 Gang Rocker Switch Panel with USB Charger and Voltmeter
Input voltage: 12V/24V DC
Switch Terminal: 5 PIN
Installation: Panel Mount, Pre-wired
Nilight 2 gang switch panels can be used to control Underglow lights, whip lights, rock lights, LED light bars, LED work lights, rear lights, fog lamps, driving lights, headlights, taillights, off-road lights, auxiliary lights, boat lights, etc.
Equipped with a sticker, you can define the name and assign switches according to your needs. The product fits most cars, SUVs, ATVs, UTVs, 4X4, motorcycles, trucks, Wranglers, boats, yachts, and other off-road vehicles.
Note:
Amp rating for the Whole Switch Panel wired in series: 12V DC/20AMP; 24V DC/10AMP.
Please wire a relay if you are going to hook an accessory that is over 20AMP at a 12VDC power source. Or the switch will be burnt out due to its high current.
- multi-function designed: this switch panel is integrated with 2 rocker switches and 4.8a dual USB charger with voltmeter. suitable for most 12v-24v dc cars, UTVS/ATVS, trucks, trailers, RVS, caravans, buses, marine boats, yachts etc.
- efficient charge: dual usb charger enable you charge two devices simultaneously at full speed with 2.4a in each usb port. with a total power of 4.8a, it works for all usb-powered devices. makes the charger 40% faster than conventional chargers.
- led voltage display: the voltmeter is builted in the center of the usb charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles.
- quality assurance: the panel is made of strengthened aluminum and well-conductive pins,ensure long lasting durability highly optimized for general use and will give you a pleasant experience.
- package include:1x 2 gang switch panel,4 x fixing screws, 2 sets of DIY stickers.
- Fit type: Universal Fit
Product details
|
|
|
|---|---|---|
Durable ComponentsMade of ABS and PC of premium quality, the switch is impact and heat resistant and it's flexible for turning on or off. prolonging the device life. | Dual USB with VoltmeterA dual USB charger enables you to charge two devices simultaneously at full speed with 2.4A in each USB port. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.
| Premium Jumper WiresThe jumper wires are made of high quality 14 gauge wires. The Tin-plated copper terminals on the wire are of good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better. |
Features
|
|
|
|---|---|---|
Night Glow DIY StickerThe package comes with 132PCS night glow stickers with various patterns and words which meet your DIY needs and help you find the switch in the dark easily. | Pre-wired wiring harnessRocker switch panel with pre-wired wiring harness for you to easily install in both 12V and 24V vehicle, yacht, ship, caravan, truck, etc. | Easy DisconnectionThe wiring harness on the switch can be easily disconnected by pressing down the clips. |
|
|
|
|---|---|---|
Use on Marine BoatMarine-grade Construction and IP65 Waterproof: It adopts high-quality Aluminum panel, Scratch-proof, and Corrosion Resistant, with rubber sealed cap for all sockets dust-tight and debris-proof. | Wide ApplicationThe product is suitable for controlling all electronic equipment on board. Available for upgrading headlights switch, fog light switch, wide light switch, car refrigerator switch, car vacuum cleaner switch replacement. etc. | Car Electronic DeviceThe product is suitable for UTVs and ATVs. Installation is simple and can be mounted horizontally or vertically. You can even use it at -25°(Min) or 80°(max). Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc. |
- Brand: Nilight
- Type: DIP Switch
- Manufacturer Warranty: 2 Years
- Operating Voltage: 12 Volts
- Connector Type: Plug In
- Current Rating: 20 Amps
- Manufacturer Part Number: 90305G-C
- Contact Type: Normally Closed
- Country/Region of Manufacture: China
- Terminal: Through Hole
- Operation Mode: OFF-NONE-ON
- UPC: 812227038298
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.