iPoster WiFi Wireless Car Truck RV Trailer Rear View Backup Camera 720P For iOS Android
$113.83
- Free US shipping
-
Arrives
Features:
Improved Technology for Wireless Signal---- No Interference/ No Signal Shut On& Off/Updated Digital Signal Tech
High Definition Camera---- Sharp Image/ New Chip of Camera/ Update Glass Lense
Waterproof Level---- Waterproof Under Water/ Waterproof IR Light Design/ Waterproof Cover of the Camera
Wide View Angle Design---- 150 Degree view angle/ Full view & no dead spot/ Bring more convenience view experience
Bring You Safety Driving---- Assistance to your life/ Assistance when backing/ Assistance when driving on the road
Night Version Automatically---- Special design of the 18 LED lights/ Clean image showing even in night/ Auto start work when in darkness or night
Specifications:
1/4 CMOS
Total Pixels:720*504 pixels
Power Supply: DC 9-35V
Lens Angle:120 degree
Mini Lumination: 0 Lux （IR*18）
Waterproof : IP67
Download the application.
1.Scanning and downloading qr codes; Open the scan window and scan the qr code of the product manual.
IOS Download Android Download
2.Search for download
Apple devices enter the APP Srore search; F - Car download
Android devices go into Google play search; F - Car download
Use skills:
●Android device use
After connecting to the WIFI of F-Car SSID, the APP video will pop up automatically. When 4G network is needed, click exit, and the connection between F-Car and the software background will be automatically disconnected.
●IOS old system usage
1.After software installation, set static IP; Connect to F-Car name WIFI,
2.enter the WIFI setting interface, remember the two lines of Numbers under "DHCP" (IP address. Subnet mask), click "static" here, and fill the two lines of Numbers under the static button (IP address. Subnet mask).
3.Click back to set successful. Static IP can be set to realize simultaneous communication between WIFI and 4G without affecting the phone's Internet access.
●New IOS system system usage
1 Find F-Car name WiFi.
2 Remember in the IPV4 address bar; IP Address, Subnet Mask, Router, these three lines of Numbers.
3 Click "Configure IP", select "Manual", fill in the following three rows of Numbers in the bottom, click save.
Product installation (very important, please read carefully)
1.Turn off the on-board power supply, and it is strictly prohibited to power the camera without a good connection.
2.Determine the installation position of vehicle camera. (there are two installation methods)
●In the first installation method, select the position of the camera and place the power cord flat in the car. Adjust your viewing Angle.
●The second installation method, cut open cigarette lighter switch position of the wire, red and black two wire. Red power cord is connected to ACC power supply 12V+ positive position of vehicle fuse box. Black power cord is connected to negative GND wire harness of vehicle, which can be used when starting the vehicle.
3.Connect the power cord to the correct position, adjust the best Angle of view, and fix the support with 3M adhesive.
Troubleshooting:
1. No image
Make sure the camera is connected correctly, open the WIFI list on your phone, and see if you can find the F-Car hotspot generated by the camera.
2. Background operation
You need to turn on the phone Settings and set it to run in the background.
Package Included:
1 x WiFi backup camera
1 x Power cable
1 x antenna
1 x User's manual
2 x screws
1 x tool
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
Features:
Improved Technology for Wireless Signal---- No Interference/ No Signal Shut On& Off/Updated Digital Signal Tech
High Definition Camera---- Sharp Image/ New Chip of Camera/ Update Glass Lense
Waterproof Level---- Waterproof Under Water/ Waterproof IR Light Design/ Waterproof Cover of the Camera
Wide View Angle Design---- 150 Degree view angle/ Full view & no dead spot/ Bring more convenience view experience
Bring You Safety Driving---- Assistance to your life/ Assistance when backing/ Assistance when driving on the road
Night Version Automatically---- Special design of the 18 LED lights/ Clean image showing even in night/ Auto start work when in darkness or night
Specifications:
1/4 CMOS
Total Pixels:720*504 pixels
Power Supply: DC 9-35V
Lens Angle:120 degree
Mini Lumination: 0 Lux （IR*18）
Waterproof : IP67
Download the application.
1.Scanning and downloading qr codes; Open the scan window and scan the qr code of the product manual.
IOS Download Android Download
2.Search for download
Apple devices enter the APP Srore search; F - Car download
Android devices go into Google play search; F - Car download
Use skills:
●Android device use
After connecting to the WIFI of F-Car SSID, the APP video will pop up automatically. When 4G network is needed, click exit, and the connection between F-Car and the software background will be automatically disconnected.
●IOS old system usage
1.After software installation, set static IP; Connect to F-Car name WIFI,
2.enter the WIFI setting interface, remember the two lines of Numbers under "DHCP" (IP address. Subnet mask), click "static" here, and fill the two lines of Numbers under the static button (IP address. Subnet mask).
3.Click back to set successful. Static IP can be set to realize simultaneous communication between WIFI and 4G without affecting the phone's Internet access.
●New IOS system system usage
1 Find F-Car name WiFi.
2 Remember in the IPV4 address bar; IP Address, Subnet Mask, Router, these three lines of Numbers.
3 Click "Configure IP", select "Manual", fill in the following three rows of Numbers in the bottom, click save.
Product installation (very important, please read carefully)
1.Turn off the on-board power supply, and it is strictly prohibited to power the camera without a good connection.
2.Determine the installation position of vehicle camera. (there are two installation methods)
●In the first installation method, select the position of the camera and place the power cord flat in the car. Adjust your viewing Angle.
●The second installation method, cut open cigarette lighter switch position of the wire, red and black two wire. Red power cord is connected to ACC power supply 12V+ positive position of vehicle fuse box. Black power cord is connected to negative GND wire harness of vehicle, which can be used when starting the vehicle.
3.Connect the power cord to the correct position, adjust the best Angle of view, and fix the support with 3M adhesive.
Troubleshooting:
1. No image
Make sure the camera is connected correctly, open the WIFI list on your phone, and see if you can find the F-Car hotspot generated by the camera.
2. Background operation
You need to turn on the phone Settings and set it to run in the background.
Package Included:
1 x WiFi backup camera
1 x Power cable
1 x antenna
1 x User's manual
2 x screws
1 x tool
Features:
Improved Technology for Wireless Signal---- No Interference/ No Signal Shut On& Off/Updated Digital Signal Tech
High Definition Camera---- Sharp Image/ New Chip of Camera/ Update Glass Lense
Waterproof Level---- Waterproof Under Water/ Waterproof IR Light Design/ Waterproof Cover of the Camera
Wide View Angle Design---- 150 Degree view angle/ Full view & no dead spot/ Bring more convenience view experience
Bring You Safety Driving---- Assistance to your life/ Assistance when backing/ Assistance when driving on the road
Night Version Automatically---- Special design of the 18 LED lights/ Clean image showing even in night/ Auto start work when in darkness or night
Specifications:
1/4 CMOS
Total Pixels:720*504 pixels
Power Supply: DC 9-35V
Lens Angle:120 degree
Mini Lumination: 0 Lux （IR*18）
Waterproof : IP67
Download the application.
1.Scanning and downloading qr codes; Open the scan window and scan the qr code of the product manual.
IOS Download Android Download
2.Search for download
Apple devices enter the APP Srore search; F - Car download
Android devices go into Google play search; F - Car download
Use skills:
●Android device use
After connecting to the WIFI of F-Car SSID, the APP video will pop up automatically. When 4G network is needed, click exit, and the connection between F-Car and the software background will be automatically disconnected.
●IOS old system usage
1.After software installation, set static IP; Connect to F-Car name WIFI,
2.enter the WIFI setting interface, remember the two lines of Numbers under "DHCP" (IP address. Subnet mask), click "static" here, and fill the two lines of Numbers under the static button (IP address. Subnet mask).
3.Click back to set successful. Static IP can be set to realize simultaneous communication between WIFI and 4G without affecting the phone's Internet access.
●New IOS system system usage
1 Find F-Car name WiFi.
2 Remember in the IPV4 address bar; IP Address, Subnet Mask, Router, these three lines of Numbers.
3 Click "Configure IP", select "Manual", fill in the following three rows of Numbers in the bottom, click save.
Product installation (very important, please read carefully)
1.Turn off the on-board power supply, and it is strictly prohibited to power the camera without a good connection.
2.Determine the installation position of vehicle camera. (there are two installation methods)
●In the first installation method, select the position of the camera and place the power cord flat in the car. Adjust your viewing Angle.
●The second installation method, cut open cigarette lighter switch position of the wire, red and black two wire. Red power cord is connected to ACC power supply 12V+ positive position of vehicle fuse box. Black power cord is connected to negative GND wire harness of vehicle, which can be used when starting the vehicle.
3.Connect the power cord to the correct position, adjust the best Angle of view, and fix the support with 3M adhesive.
Troubleshooting:
1. No image
Make sure the camera is connected correctly, open the WIFI list on your phone, and see if you can find the F-Car hotspot generated by the camera.
2. Background operation
You need to turn on the phone Settings and set it to run in the background.
Package Included:
1 x WiFi backup camera
1 x Power cable
1 x antenna
1 x User's manual
2 x screws
1 x tool
Item Specifics
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.