Foundation Armor Armor WL550 Matte Wet Look Concrete, Brick, and Paver Sealer - 1 GAL
$165.16
- Free US shipping
-
Arrives
The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will darken the surface to slightly enhance any dull and faded coloring.
The Armor WL550 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.
Benefits:
- Will slightly darken the surface to bring out dull and faded coloring
- Works entirely below the surface and won’t leave a surface film
- Will reduce water absorption by up to 95%, reducing the damage and deterioration caused by water absorption such as cracking, spalling, pitting, mold, mildew, and algae
- Made from non-recycled US manufactured resins
- Breathable, UV resistant
Uses
The Armor WL550 is a great choice for a variety of interior and exterior concrete applications, including:
- Pool decks and patios
- Driveways, walkways, and stairs
- Garage and basement floors
- Retail and shop floors
- Warehouse floors
- Sea walls
- Retaining walls
- Roadways
- Sidewalks
- Bridges
- Much more!
The WL550 can be applied to a variety of interior and exterior concrete surfaces, including:
- Poured and broom finished concrete
- Exposed aggregate concrete
- Concrete pavers
- Brick pavers
- Red clay brick
- Flagstone
- Natural stone
The Armor WL550 is designed specifically to be used on unsealed concrete, brick, and masonry. It can’t be applied to surfaces recently applied with a water repellent sealer, or surfaces previously sealed with a film-forming sealer or coating.
Appearance
The Armor WL550 is designed to work entirely below the surface. It will not leave a visible surface film. It is designed to slightly darken the surface in order to provide a matte wet look. For a more dramatic color enhancement, or to achieve a low gloss or high gloss finish, consider instead the Armor AR350 for a low gloss wet look, or the Armor AR500 for a high gloss wet look.
Color enhancement will vary depending on several factors including surface porosity. We suggest applying a sample of the Armor WL550 first to verify you are able to achieve the desired look.
Product Life
When properly applied, the ArmorWL550 can provide up to 3-5 years of life on an exterior surface before the need to recoat.
Water Bead: Surface water beading will not occur on all surfaces. While some surfaces may experience an instantaneous bead, others won’t experience a surface water bead at all. Surface water beading is not a sealer benefit. Surface water bead is caused from resin build-up on the surface. Once the resin build-up goes away, so will the bead. The Armor WL550 is designed to work entirely below the surface so its benefits are made visible through performance. You will find sealed surfaces dry faster, are easier to clean, and experience less damage caused by freeze-thaw cycles and de-icing salts.
Shipping & Returns
This product ships FedEx HAZMAT. A DIRECT signature is required for delivery.This product ships FedEx HAZMAT. A DIRECT signature is required for delivery. There are no returns or exchanges for this product. Samples are available if you'd like to try before purchasing for your convenience.
How To Apply:
The Armor WL550 should be applied with a solvent/acetone resistant HVLP pump sprayer. For best results, avoid applying with a roller. For consistent coverage, one even coat should be applied. Do not let puddle, product is not designed to leave a surface film.
Time of Day
To allow for proper absorption and reaction, the Armor WL550 should only be applied in the early evening (around 5 PM or later) when air and surface temperatures are declining, and when the sun is no longer positioned over the surface.
Surface Preparation
The Armor WL550 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor WL550 to a test area to verify absorption, coverage, compatibility, and project suitability.
The Armor WL550 is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a water repellent sealer, or previously sealed with a film-forming sealer or coating.
For complete application instructions and safety data, please refer to the Technical Data Sheet or SDS Sheet.
Coverage:
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary.
VOC Regulations: Due to VOC regulations this product can't be shipped to CA. If you live in CA, please consider the Armor AR350 50 VOC or Armor SX5000 WB instead.
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will darken the surface to slightly enhance any dull and faded coloring.
The Armor WL550 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.
Benefits:
- Will slightly darken the surface to bring out dull and faded coloring
- Works entirely below the surface and won’t leave a surface film
- Will reduce water absorption by up to 95%, reducing the damage and deterioration caused by water absorption such as cracking, spalling, pitting, mold, mildew, and algae
- Made from non-recycled US manufactured resins
- Breathable, UV resistant
Uses
The Armor WL550 is a great choice for a variety of interior and exterior concrete applications, including:
- Pool decks and patios
- Driveways, walkways, and stairs
- Garage and basement floors
- Retail and shop floors
- Warehouse floors
- Sea walls
- Retaining walls
- Roadways
- Sidewalks
- Bridges
- Much more!
The WL550 can be applied to a variety of interior and exterior concrete surfaces, including:
- Poured and broom finished concrete
- Exposed aggregate concrete
- Concrete pavers
- Brick pavers
- Red clay brick
- Flagstone
- Natural stone
The Armor WL550 is designed specifically to be used on unsealed concrete, brick, and masonry. It can’t be applied to surfaces recently applied with a water repellent sealer, or surfaces previously sealed with a film-forming sealer or coating.
Appearance
The Armor WL550 is designed to work entirely below the surface. It will not leave a visible surface film. It is designed to slightly darken the surface in order to provide a matte wet look. For a more dramatic color enhancement, or to achieve a low gloss or high gloss finish, consider instead the Armor AR350 for a low gloss wet look, or the Armor AR500 for a high gloss wet look.
Color enhancement will vary depending on several factors including surface porosity. We suggest applying a sample of the Armor WL550 first to verify you are able to achieve the desired look.
Product Life
When properly applied, the ArmorWL550 can provide up to 3-5 years of life on an exterior surface before the need to recoat.
Water Bead: Surface water beading will not occur on all surfaces. While some surfaces may experience an instantaneous bead, others won’t experience a surface water bead at all. Surface water beading is not a sealer benefit. Surface water bead is caused from resin build-up on the surface. Once the resin build-up goes away, so will the bead. The Armor WL550 is designed to work entirely below the surface so its benefits are made visible through performance. You will find sealed surfaces dry faster, are easier to clean, and experience less damage caused by freeze-thaw cycles and de-icing salts.
Shipping & Returns
This product ships FedEx HAZMAT. A DIRECT signature is required for delivery.This product ships FedEx HAZMAT. A DIRECT signature is required for delivery. There are no returns or exchanges for this product. Samples are available if you'd like to try before purchasing for your convenience.
How To Apply:
The Armor WL550 should be applied with a solvent/acetone resistant HVLP pump sprayer. For best results, avoid applying with a roller. For consistent coverage, one even coat should be applied. Do not let puddle, product is not designed to leave a surface film.
Time of Day
To allow for proper absorption and reaction, the Armor WL550 should only be applied in the early evening (around 5 PM or later) when air and surface temperatures are declining, and when the sun is no longer positioned over the surface.
Surface Preparation
The Armor WL550 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor WL550 to a test area to verify absorption, coverage, compatibility, and project suitability.
The Armor WL550 is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a water repellent sealer, or previously sealed with a film-forming sealer or coating.
For complete application instructions and safety data, please refer to the Technical Data Sheet or SDS Sheet.
Coverage:
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary.
VOC Regulations: Due to VOC regulations this product can't be shipped to CA. If you live in CA, please consider the Armor AR350 50 VOC or Armor SX5000 WB instead.
The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will darken the surface to slightly enhance any dull and faded coloring.
The Armor WL550 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.
Benefits:
- Will slightly darken the surface to bring out dull and faded coloring
- Works entirely below the surface and won’t leave a surface film
- Will reduce water absorption by up to 95%, reducing the damage and deterioration caused by water absorption such as cracking, spalling, pitting, mold, mildew, and algae
- Made from non-recycled US manufactured resins
- Breathable, UV resistant
Uses
The Armor WL550 is a great choice for a variety of interior and exterior concrete applications, including:
- Pool decks and patios
- Driveways, walkways, and stairs
- Garage and basement floors
- Retail and shop floors
- Warehouse floors
- Sea walls
- Retaining walls
- Roadways
- Sidewalks
- Bridges
- Much more!
The WL550 can be applied to a variety of interior and exterior concrete surfaces, including:
- Poured and broom finished concrete
- Exposed aggregate concrete
- Concrete pavers
- Brick pavers
- Red clay brick
- Flagstone
- Natural stone
The Armor WL550 is designed specifically to be used on unsealed concrete, brick, and masonry. It can’t be applied to surfaces recently applied with a water repellent sealer, or surfaces previously sealed with a film-forming sealer or coating.
Appearance
The Armor WL550 is designed to work entirely below the surface. It will not leave a visible surface film. It is designed to slightly darken the surface in order to provide a matte wet look. For a more dramatic color enhancement, or to achieve a low gloss or high gloss finish, consider instead the Armor AR350 for a low gloss wet look, or the Armor AR500 for a high gloss wet look.
Color enhancement will vary depending on several factors including surface porosity. We suggest applying a sample of the Armor WL550 first to verify you are able to achieve the desired look.
Product Life
When properly applied, the ArmorWL550 can provide up to 3-5 years of life on an exterior surface before the need to recoat.
Water Bead: Surface water beading will not occur on all surfaces. While some surfaces may experience an instantaneous bead, others won’t experience a surface water bead at all. Surface water beading is not a sealer benefit. Surface water bead is caused from resin build-up on the surface. Once the resin build-up goes away, so will the bead. The Armor WL550 is designed to work entirely below the surface so its benefits are made visible through performance. You will find sealed surfaces dry faster, are easier to clean, and experience less damage caused by freeze-thaw cycles and de-icing salts.
Shipping & Returns
This product ships FedEx HAZMAT. A DIRECT signature is required for delivery.This product ships FedEx HAZMAT. A DIRECT signature is required for delivery. There are no returns or exchanges for this product. Samples are available if you'd like to try before purchasing for your convenience.
How To Apply:
The Armor WL550 should be applied with a solvent/acetone resistant HVLP pump sprayer. For best results, avoid applying with a roller. For consistent coverage, one even coat should be applied. Do not let puddle, product is not designed to leave a surface film.
Time of Day
To allow for proper absorption and reaction, the Armor WL550 should only be applied in the early evening (around 5 PM or later) when air and surface temperatures are declining, and when the sun is no longer positioned over the surface.
Surface Preparation
The Armor WL550 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor WL550 to a test area to verify absorption, coverage, compatibility, and project suitability.
The Armor WL550 is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a water repellent sealer, or previously sealed with a film-forming sealer or coating.
For complete application instructions and safety data, please refer to the Technical Data Sheet or SDS Sheet.
Coverage:
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary.
VOC Regulations: Due to VOC regulations this product can't be shipped to CA. If you live in CA, please consider the Armor AR350 50 VOC or Armor SX5000 WB instead.
- Container Size: 1 gal
- Application Method: Roller
- Form: Liquid
- Color: Clear
- Coverage: Up to 175 FT2 Per Gallon In One Coat
- MPN: WL5501GAL
- Suitable For: Masonry
- Brand: Foundation Armor
- Type: Concrete Sealer
- Number of Recommended Coats: 1
- Number in Pack: 1
- Sheen: Matte
- Country/Region of Manufacture: United States
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.