Facon Wall Touch Dimmer Switch w/Indicator for RV 12V 24V LED Bulb Strip Light
Facon Wall Touch Dimmer Switch w/Indicator for RV 12V 24V LED Bulb Strip Light
Facon Wall Touch Dimmer Switch w/Indicator for RV 12V 24V LED Bulb Strip Light
Product Overview
Features:
Compatible to use with LED Lights, Incandescent , Halogen bulbs and LED Strip Lights under DC 12V or 24V power supply
Full range of brightness control: Hold - Dim to Bright; Touch - On & Off.
With Blue Light Indicator, you can find it easily in the dark.
Rate up to 36 Watts(12V) or 72 Watts(24V), 3A to Use with Single or Multi-lights
Replace your existing on&off switch with this NEW wall recessed mounting touch dimmer switch to create low-light ambiance
Please note - Many RV light switches only interrupt the 12V positive wire. This dimmer requires you to connect the negative wires also (positive in, positive out, negative in, negative out, as labeled on the wires). If you can’t locate the negative wire going to your lights, this dimmer won’t work
Touch Dimmer Switch with Blue Indicator Light
- Voltage: 12V / 24V DC
- Dia: 1 1/5'' x H 5/8''
- Finish: Chrome
- Install: Available for Flushed Mounting and Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
- Comes with Blue Indicator Light
Recesssed Mount Touch Dimmer Switch
- Voltage: 12V / 24V DC
- Dia: 7/8'' x H 5/8''
- Finish: Chrome
- Install: Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
ELECTRICAL CONNECTIONS
First connect the dimmer to power supply
- Connect black dashed line wire(s) with “INPUT -” mark from the dimmer to the neutral wire of the supply circuit.
- Connect White wire(s) with “INPUT +” mark from the dimmer to the live wire of the supply circuit
Then connect the dimmer to your lights
- Connect black dashed line wire(s) with “OUTPUT -” mark from the dimmer to the white wire(s) of LED lamps.
- Connect white wire(s) with “OUTPUT +” mark from the dimmer to the black wire(s) of LED lamps
Easy Installation
- Stick the touch dimmer inside or beneath the wood board(or other insulation material like marble) with the 3M adhesive sticker (Included)
- Fixed the touching area with a Touch Signed sticker (Included) on the surface of the wood board against to the dimmer switch area.
- Control the light by touch on the surface of wood board
TOUCH INSTRUCTION
- A.When the dimmer is connected, it will be at OFF status.
- B. For turning on the light, land a short click on the touch area. For turning off, do it again.
- C. To Dimming after turning on, keep the finger on touch pad, dim the brightness from low to high
- Or vice versa, and after reaches the highest or lowest brightness, it will start dim again
- To turning off after dimming, leave the finger from touch pad for more than 1 second and touch again
- D. At the OFF status, keep the finger on touch pad, the lights will be dimming from low to high
- The dimmer has a memory function
- When the light turns on, the brightness will be at the status of the last time when it was turns off
How to replace a old dimmer with 2 wires only
Normally, a dimmer switch have 4 wires: 2 wires connect to power and 2 wires connect to lights.
But some dimmer switch only have 2 wires, because the positive wire from the power and the lights was connected together.
Please refer to this wiring instructions, if your old dimmer comes with 2 wires only.
If your RV only have 1 wire, and it is positive wire.
Please connect the white wire(negative(-) wire) to the metal frame on your RV / Camper / Trailer.
| Brand: | Facon |
|---|---|
| Isin: | IXSMQQZLME9A |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
Product Overview
Features:
Compatible to use with LED Lights, Incandescent , Halogen bulbs and LED Strip Lights under DC 12V or 24V power supply
Full range of brightness control: Hold - Dim to Bright; Touch - On & Off.
With Blue Light Indicator, you can find it easily in the dark.
Rate up to 36 Watts(12V) or 72 Watts(24V), 3A to Use with Single or Multi-lights
Replace your existing on&off switch with this NEW wall recessed mounting touch dimmer switch to create low-light ambiance
Please note - Many RV light switches only interrupt the 12V positive wire. This dimmer requires you to connect the negative wires also (positive in, positive out, negative in, negative out, as labeled on the wires). If you can’t locate the negative wire going to your lights, this dimmer won’t work
Touch Dimmer Switch with Blue Indicator Light
- Voltage: 12V / 24V DC
- Dia: 1 1/5'' x H 5/8''
- Finish: Chrome
- Install: Available for Flushed Mounting and Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
- Comes with Blue Indicator Light
Recesssed Mount Touch Dimmer Switch
- Voltage: 12V / 24V DC
- Dia: 7/8'' x H 5/8''
- Finish: Chrome
- Install: Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
ELECTRICAL CONNECTIONS
First connect the dimmer to power supply
- Connect black dashed line wire(s) with “INPUT -” mark from the dimmer to the neutral wire of the supply circuit.
- Connect White wire(s) with “INPUT +” mark from the dimmer to the live wire of the supply circuit
Then connect the dimmer to your lights
- Connect black dashed line wire(s) with “OUTPUT -” mark from the dimmer to the white wire(s) of LED lamps.
- Connect white wire(s) with “OUTPUT +” mark from the dimmer to the black wire(s) of LED lamps
Easy Installation
- Stick the touch dimmer inside or beneath the wood board(or other insulation material like marble) with the 3M adhesive sticker (Included)
- Fixed the touching area with a Touch Signed sticker (Included) on the surface of the wood board against to the dimmer switch area.
- Control the light by touch on the surface of wood board
TOUCH INSTRUCTION
- A.When the dimmer is connected, it will be at OFF status.
- B. For turning on the light, land a short click on the touch area. For turning off, do it again.
- C. To Dimming after turning on, keep the finger on touch pad, dim the brightness from low to high
- Or vice versa, and after reaches the highest or lowest brightness, it will start dim again
- To turning off after dimming, leave the finger from touch pad for more than 1 second and touch again
- D. At the OFF status, keep the finger on touch pad, the lights will be dimming from low to high
- The dimmer has a memory function
- When the light turns on, the brightness will be at the status of the last time when it was turns off
How to replace a old dimmer with 2 wires only
Normally, a dimmer switch have 4 wires: 2 wires connect to power and 2 wires connect to lights.
But some dimmer switch only have 2 wires, because the positive wire from the power and the lights was connected together.
Please refer to this wiring instructions, if your old dimmer comes with 2 wires only.
If your RV only have 1 wire, and it is positive wire.
Please connect the white wire(negative(-) wire) to the metal frame on your RV / Camper / Trailer.
| Brand: | Facon |
|---|---|
| Isin: | IXSMQQZLME9A |
Features:
Compatible to use with LED Lights, Incandescent , Halogen bulbs and LED Strip Lights under DC 12V or 24V power supply
Full range of brightness control: Hold - Dim to Bright; Touch - On & Off.
With Blue Light Indicator, you can find it easily in the dark.
Rate up to 36 Watts(12V) or 72 Watts(24V), 3A to Use with Single or Multi-lights
Replace your existing on&off switch with this NEW wall recessed mounting touch dimmer switch to create low-light ambiance
Please note - Many RV light switches only interrupt the 12V positive wire. This dimmer requires you to connect the negative wires also (positive in, positive out, negative in, negative out, as labeled on the wires). If you can’t locate the negative wire going to your lights, this dimmer won’t work
Touch Dimmer Switch with Blue Indicator Light
- Voltage: 12V / 24V DC
- Dia: 1 1/5'' x H 5/8''
- Finish: Chrome
- Install: Available for Flushed Mounting and Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
- Comes with Blue Indicator Light
Recesssed Mount Touch Dimmer Switch
- Voltage: 12V / 24V DC
- Dia: 7/8'' x H 5/8''
- Finish: Chrome
- Install: Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
ELECTRICAL CONNECTIONS
First connect the dimmer to power supply
- Connect black dashed line wire(s) with “INPUT -” mark from the dimmer to the neutral wire of the supply circuit.
- Connect White wire(s) with “INPUT +” mark from the dimmer to the live wire of the supply circuit
Then connect the dimmer to your lights
- Connect black dashed line wire(s) with “OUTPUT -” mark from the dimmer to the white wire(s) of LED lamps.
- Connect white wire(s) with “OUTPUT +” mark from the dimmer to the black wire(s) of LED lamps
Easy Installation
- Stick the touch dimmer inside or beneath the wood board(or other insulation material like marble) with the 3M adhesive sticker (Included)
- Fixed the touching area with a Touch Signed sticker (Included) on the surface of the wood board against to the dimmer switch area.
- Control the light by touch on the surface of wood board
TOUCH INSTRUCTION
- A.When the dimmer is connected, it will be at OFF status.
- B. For turning on the light, land a short click on the touch area. For turning off, do it again.
- C. To Dimming after turning on, keep the finger on touch pad, dim the brightness from low to high
- Or vice versa, and after reaches the highest or lowest brightness, it will start dim again
- To turning off after dimming, leave the finger from touch pad for more than 1 second and touch again
- D. At the OFF status, keep the finger on touch pad, the lights will be dimming from low to high
- The dimmer has a memory function
- When the light turns on, the brightness will be at the status of the last time when it was turns off
How to replace a old dimmer with 2 wires only
Normally, a dimmer switch have 4 wires: 2 wires connect to power and 2 wires connect to lights.
But some dimmer switch only have 2 wires, because the positive wire from the power and the lights was connected together.
Please refer to this wiring instructions, if your old dimmer comes with 2 wires only.
If your RV only have 1 wire, and it is positive wire.
Please connect the white wire(negative(-) wire) to the metal frame on your RV / Camper / Trailer.
- Interior Part Type: Interior Light Switch/Dimmer
- Certification: cETL
- Voltage: 12 volts
- Manufacturer Part Number: DIMMER-CH-2
- Brand: Facon
- Warranty: 2 Year
- UPC: 6938546769928
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.