Eshooter Kestrel V2 SE Electronic Trigger (Japanese Genuine Product / Rear Wiring / Technical Standards Compliant) for Electric Guns Kestrel V2
$164.29
- $14.99 shipping from Japan View details
-
Arrives
- Eshooter
- Introducing the "Kestrel V2 SE" from the popular Eshooter Kestrel series, a high-performance electronic trigger for airsoft guns Switched the conventional optical trigger sensor to a mechanical switch, achieving a more linear and crisp trigger feeling Although the trigger adjustment function has been discontinued, the trigger stroke tune allows for precise hair trigger settings without any misalignment The gear sensor has been improved from sector gear detection to a cutoff cam optical detection method, offering flexible compatibility with DSG (Dual Sector Gear), SSG (Single Sector Gear), machined gears, and torque-up gears It achieves stable operation with less influence from grease
- Compatible with brushless motors: Optimized for new generation brushless motors such as H.T.G. Basic infinity brushless motors, and greatly improved compatibility Automatic active braking function provides both sharp semi-auto shooting and precise pre-cocking Bluetooth Communication Function (Technical Compliance Certified): You can intuitively set up from your smartphone or tablet using the Eshooter dedicated app (Android and iOS compatible) You can easily change various settings while checking the operating status in real-time The app is distributed for free and supports updates at any time
- 【App-installed features】 Dashboard: You can check the number of shots fired, firing cycle, trigger response, tip temperature, current, voltage, and operating time Quick Setup: Can save up to 3 pattern settings, and by holding the 3-second trigger in the SAFE position, you can instantly switch to your preferred setting Shooting mode selection: freely choose the mode from SAFE, SEMI, BINARY, BURST, AUTO, SNIPER Gear optimization: Compatible with single sector, DSG, and machined gears, ensuring optimal operation with gear sensors Pre-cocking Adjustment: High-precision adjustment from 0~200m/s in 200 stages, allowing fine-tuning of trigger response in all modes Launch Cycle Control (ROF CONTROL): Adjusts firing cycle in 10% increments (40%-100%) while maintaining full auto-response Battery protection function: Displays remaining capacity, low battery warning, prevents over-discharge, and allows setting sleep mode ON/OFF Sleep mode automatically transitions after 1 hour of inactivity, and reconnects by simply reinserting the battery
- Adaptive Active Brake/Smart Fuse: Prevents unstable gear operation with Adaptive Active Brake, stops the piston in the front to extend its lifespan Protects MOSFET from overheating, overload, and short circuits with Smart Fuse and Auto Fuse Lock Rotor Protection: Activates during abnormal operation of the gears and motor, stopping operation and preventing damage to the gearbox Sniper Delay Mode: Choose from 0.5s, 1s, 2s, or 3s firing intervals for precise shooting Sensor Setting Mode: Allows you to see and set the state of each sensor at a glance to maintain optimal calibration Firmware Update: Notified on the app, supports firmware updates The initial password is "888888": The all-reset can be executed by pulling the trigger continuously for 8 seconds in the SAFE position
- Compatible models: Developed around the Standard Electric Gun Ver2 Mecha Box (rear wiring), it is compatible with Ver2 Mecha Boxes released by Tokyo Marui and other domestic and overseas companies (modifications may be required) Simply installing the Kestrel V2 SE can significantly improve the performance of your electric gun, ensuring a definite increase in your advantage in shooting competitions and survival games 【Main Specifications】 Voltage range: 3.75-17V Compatible with LiPo, LiHv, LiFe batteries. NiCd batteries and nickel-metal hydride batteries cannot be used Standby Power: 17mA Dimensions (length x width x height): 47.4 x 28.7 x 13.5mm (1.86 x 1.13 x 0.53 inches) Weight: 27.6g (0.97 oz) Product Contents: Eshooter kestrel V2SE main unit, SIM washer, lock washer, screws, heat shrink tubing, T-plug connector (female), spare stickers, instruction manual (English)
- Note: Please download the Japanese instruction manual from the official website ※Assembly requires disassembly of the electric gun ※Damages caused by assembly errors, water damage, reverse polarity, short circuits, or modifications by the customer are not covered by the warranty ※Please note that due to the design of the electronic circuit board, the use of Li-Po batteries is assumed. Nickel-hydrogen batteries are not compatible Please remove the battery when not in use If left connected, power will continue to flow to the electronic circuit board, leading to malfunction
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
- Eshooter
- Introducing the "Kestrel V2 SE" from the popular Eshooter Kestrel series, a high-performance electronic trigger for airsoft guns Switched the conventional optical trigger sensor to a mechanical switch, achieving a more linear and crisp trigger feeling Although the trigger adjustment function has been discontinued, the trigger stroke tune allows for precise hair trigger settings without any misalignment The gear sensor has been improved from sector gear detection to a cutoff cam optical detection method, offering flexible compatibility with DSG (Dual Sector Gear), SSG (Single Sector Gear), machined gears, and torque-up gears It achieves stable operation with less influence from grease
- Compatible with brushless motors: Optimized for new generation brushless motors such as H.T.G. Basic infinity brushless motors, and greatly improved compatibility Automatic active braking function provides both sharp semi-auto shooting and precise pre-cocking Bluetooth Communication Function (Technical Compliance Certified): You can intuitively set up from your smartphone or tablet using the Eshooter dedicated app (Android and iOS compatible) You can easily change various settings while checking the operating status in real-time The app is distributed for free and supports updates at any time
- 【App-installed features】 Dashboard: You can check the number of shots fired, firing cycle, trigger response, tip temperature, current, voltage, and operating time Quick Setup: Can save up to 3 pattern settings, and by holding the 3-second trigger in the SAFE position, you can instantly switch to your preferred setting Shooting mode selection: freely choose the mode from SAFE, SEMI, BINARY, BURST, AUTO, SNIPER Gear optimization: Compatible with single sector, DSG, and machined gears, ensuring optimal operation with gear sensors Pre-cocking Adjustment: High-precision adjustment from 0~200m/s in 200 stages, allowing fine-tuning of trigger response in all modes Launch Cycle Control (ROF CONTROL): Adjusts firing cycle in 10% increments (40%-100%) while maintaining full auto-response Battery protection function: Displays remaining capacity, low battery warning, prevents over-discharge, and allows setting sleep mode ON/OFF Sleep mode automatically transitions after 1 hour of inactivity, and reconnects by simply reinserting the battery
- Adaptive Active Brake/Smart Fuse: Prevents unstable gear operation with Adaptive Active Brake, stops the piston in the front to extend its lifespan Protects MOSFET from overheating, overload, and short circuits with Smart Fuse and Auto Fuse Lock Rotor Protection: Activates during abnormal operation of the gears and motor, stopping operation and preventing damage to the gearbox Sniper Delay Mode: Choose from 0.5s, 1s, 2s, or 3s firing intervals for precise shooting Sensor Setting Mode: Allows you to see and set the state of each sensor at a glance to maintain optimal calibration Firmware Update: Notified on the app, supports firmware updates The initial password is "888888": The all-reset can be executed by pulling the trigger continuously for 8 seconds in the SAFE position
- Compatible models: Developed around the Standard Electric Gun Ver2 Mecha Box (rear wiring), it is compatible with Ver2 Mecha Boxes released by Tokyo Marui and other domestic and overseas companies (modifications may be required) Simply installing the Kestrel V2 SE can significantly improve the performance of your electric gun, ensuring a definite increase in your advantage in shooting competitions and survival games 【Main Specifications】 Voltage range: 3.75-17V Compatible with LiPo, LiHv, LiFe batteries. NiCd batteries and nickel-metal hydride batteries cannot be used Standby Power: 17mA Dimensions (length x width x height): 47.4 x 28.7 x 13.5mm (1.86 x 1.13 x 0.53 inches) Weight: 27.6g (0.97 oz) Product Contents: Eshooter kestrel V2SE main unit, SIM washer, lock washer, screws, heat shrink tubing, T-plug connector (female), spare stickers, instruction manual (English)
- Note: Please download the Japanese instruction manual from the official website ※Assembly requires disassembly of the electric gun ※Damages caused by assembly errors, water damage, reverse polarity, short circuits, or modifications by the customer are not covered by the warranty ※Please note that due to the design of the electronic circuit board, the use of Li-Po batteries is assumed. Nickel-hydrogen batteries are not compatible Please remove the battery when not in use If left connected, power will continue to flow to the electronic circuit board, leading to malfunction
Please download the Japanese instruction manual from the official website
※Note: Attaching this requires disassembling the electric gun
※Damages caused by installation errors, water damage, reverse polarity, short circuits, or modifications by the customer are not covered by the warranty
Please note that due to the design of the electronic circuit board, Li-Po batteries are a prerequisite. Therefore, nickel-hydrogen batteries are not compatible
※Remove the battery if not in use If you leave it connected, power will continue to flow to the electronic circuit board and lead to malfunction
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.99 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We may provide a return shipping label for your return. If the return is due to our error, such as receiving the wrong item, a damaged item, or a defective product, we will cover the return shipping cost.
If the return is due to the customer’s reason, such as ordering the wrong item, changing your mind, or no longer needing the item, the original shipping fee and the return label fee will be deducted from your refund amount.
If a return is sent back without prior contact or without using our provided label, we cannot be held responsible for any return shipping costs or delivery issues.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.