DW-Auto 6706 Injector Rail Assembly Remover & GM245 Fuel Injector Seals Tool Fits For GM
$209.99
- Free US shipping
-
Arrives
Fits for 2010 - 2017 GM 2.0L & 3.6L engines with Hitachi Fuel Injectors; Fit for 2012 - 2017 GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch,Continental and Delphi Fuel injectors; Fit for 2016 Holden Colorado 7 ; Fit for 2014-2019 Subaru 2.0L/2.4L turbo engines.
6706 Injector Rail Assembly Remover Tool
Universal Fit for most of vehicles. Fit for 27 - 214 General Motors direct injection vehicles. Also fit for select Cadillac, Saturn, Pontiac and Chevrolet direct injection engines, 27 - 214. 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.Note: If you are working on a 5.3L or 6.2L you will need 2 sets. (See following for specify model)
Function
GM245 Fuel Injector Seals Tool is used to replace the fuel injector Teflon O Ring Seals without damage or leakge. 6706 Injector Rail Assembly Remover Tool is used to evenly loosen the seat rings of all injectors and remove the direct injection fuel rail without damaging other parts.
Superior Material
Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant.
Replacement
GM245 Fuel Injector Seals Tool interchanges with part number EN-49245, EN-51105, 18683AA000 both in function and performance. 6706 Injector Rail Assembly Remover Tool replaces for part number EN-49248.
Premium Material
Made from quality steel, precision cutting to make each part is manufactured to specifications using.
High precision and hardness ensure reliable long-term service.
Package Includes
1 × Seal Sizer
1 × Installer Pusher
2 × Long Seal Installer Guide
2 × Short Seal Installer Guide
GM245 Fuel Injector Seals Tools
Fits for General Motors 2.0L & 3.6L engines with Hitachi fuel injectors [2010-2017];
Fits for GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch, Continental Delphi fuel injectors [2012-2017];
Fits for Subaru 2.0L/2.4L turbo engines [2014-2019].
Fits for Holden Colorado 7 2016
Features
- Used for replacing the fuel injector Teflon O Ring Seals.
- Installs the dual seals onto the end of the injector to ensure proper injector installation.
- Comparable to #EN-4924, EN-51105, 18683AA000, 18683A.
- Used for the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances.
- Once the engine has been run, injector and rail removal is very difficult, and the assembly must be removed as straight as possible to prevent the chance of damaging an injector bore in the cylinder head, or to the mount assembly.
- Each mount assembly contains an isolator, and cannot have any force applied to the mount for removal.
Easily remove and replace the old seals for reusing an injector
Step 1. Cut off the old Teflon seal near the tip of the injector; | Step 2. Place the pilot cone on the tip of the injector; | Step 3. Push the new seal on the cone; |
Step 4. Use the installer pusher to push the seal into the groove of the injector; | Step 5. Use the seal sizer tool to compress the Teflon seal to the correct size; | Step 6. Finish! (EN-49245 must be used to install the seals correctly and to ensure they are sized correctly for leak-free operation.) |
6706 Injector Rail Assembly Remover Tool
Universal Fit for most of vehicles.
Fits for 2007 - 2014 General Motors direct injection vehicles.
Fits for Cadillac Saturn Pontiac Chevrolet direct injection engines,
Fits for 2007 - 2014 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.
Note: If you are working on a 5.3L or 6.2L you will need 2 sets.
- Similar to EN-49248 and compatible with OTC 6706.
- This Tool installs in place of the mounting bolts, and reaches under the injector rail near each mount location.
- The hand wheels on this tool at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head and rail mount assemblies.
- Helps properly remove the direct injection fuel rail without damage.
Usage Guide
Step 1. Remove the fuel injection fuel rail noise shield. Disconnect the electrical harness from the fuel rail harness connection. Disconnect all 4-fuel injector electrical connections. Remove the fuel rail assembly retaining bolts. Note: Use care to avoid contact with the fuel rail harness during special tool installation and fuel rail removal. | Step 2. Install EN-49248studs (1) into the 2 center fuel rail assembly retaining bolt locations. Tighten the studs to 22-Y(16-lb-ft). Install EN-49248 remover-(2) onto each stud, and engage the hooks to the fuel rail. Install the nuts-(3) retaining there mover onto the studs and tighten until snug. | Step 3. Note: EN-49248 will assist in the proper removal of the fuel rail assembly. Ensure that the following conditions are met: Turn the handles simultaneously in order to pull the fuel rail straight out along the fuel injector axis. DO NOT twist when pulling out on the fuel rail and injector assembly. Using EN-49248 remover, remove the fuel rail assembly-(1). |
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
Fits for 2010 - 2017 GM 2.0L & 3.6L engines with Hitachi Fuel Injectors; Fit for 2012 - 2017 GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch,Continental and Delphi Fuel injectors; Fit for 2016 Holden Colorado 7 ; Fit for 2014-2019 Subaru 2.0L/2.4L turbo engines.
6706 Injector Rail Assembly Remover Tool
Universal Fit for most of vehicles. Fit for 27 - 214 General Motors direct injection vehicles. Also fit for select Cadillac, Saturn, Pontiac and Chevrolet direct injection engines, 27 - 214. 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.Note: If you are working on a 5.3L or 6.2L you will need 2 sets. (See following for specify model)
Function
GM245 Fuel Injector Seals Tool is used to replace the fuel injector Teflon O Ring Seals without damage or leakge. 6706 Injector Rail Assembly Remover Tool is used to evenly loosen the seat rings of all injectors and remove the direct injection fuel rail without damaging other parts.
Superior Material
Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant.
Replacement
GM245 Fuel Injector Seals Tool interchanges with part number EN-49245, EN-51105, 18683AA000 both in function and performance. 6706 Injector Rail Assembly Remover Tool replaces for part number EN-49248.
Premium Material
Made from quality steel, precision cutting to make each part is manufactured to specifications using.
High precision and hardness ensure reliable long-term service.
Package Includes
1 × Seal Sizer
1 × Installer Pusher
2 × Long Seal Installer Guide
2 × Short Seal Installer Guide
GM245 Fuel Injector Seals Tools
Fits for General Motors 2.0L & 3.6L engines with Hitachi fuel injectors [2010-2017];
Fits for GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch, Continental Delphi fuel injectors [2012-2017];
Fits for Subaru 2.0L/2.4L turbo engines [2014-2019].
Fits for Holden Colorado 7 2016
Features
- Used for replacing the fuel injector Teflon O Ring Seals.
- Installs the dual seals onto the end of the injector to ensure proper injector installation.
- Comparable to #EN-4924, EN-51105, 18683AA000, 18683A.
- Used for the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances.
- Once the engine has been run, injector and rail removal is very difficult, and the assembly must be removed as straight as possible to prevent the chance of damaging an injector bore in the cylinder head, or to the mount assembly.
- Each mount assembly contains an isolator, and cannot have any force applied to the mount for removal.
Easily remove and replace the old seals for reusing an injector
Step 1. Cut off the old Teflon seal near the tip of the injector; | Step 2. Place the pilot cone on the tip of the injector; | Step 3. Push the new seal on the cone; |
Step 4. Use the installer pusher to push the seal into the groove of the injector; | Step 5. Use the seal sizer tool to compress the Teflon seal to the correct size; | Step 6. Finish! (EN-49245 must be used to install the seals correctly and to ensure they are sized correctly for leak-free operation.) |
6706 Injector Rail Assembly Remover Tool
Universal Fit for most of vehicles.
Fits for 2007 - 2014 General Motors direct injection vehicles.
Fits for Cadillac Saturn Pontiac Chevrolet direct injection engines,
Fits for 2007 - 2014 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.
Note: If you are working on a 5.3L or 6.2L you will need 2 sets.
- Similar to EN-49248 and compatible with OTC 6706.
- This Tool installs in place of the mounting bolts, and reaches under the injector rail near each mount location.
- The hand wheels on this tool at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head and rail mount assemblies.
- Helps properly remove the direct injection fuel rail without damage.
Usage Guide
Step 1. Remove the fuel injection fuel rail noise shield. Disconnect the electrical harness from the fuel rail harness connection. Disconnect all 4-fuel injector electrical connections. Remove the fuel rail assembly retaining bolts. Note: Use care to avoid contact with the fuel rail harness during special tool installation and fuel rail removal. | Step 2. Install EN-49248studs (1) into the 2 center fuel rail assembly retaining bolt locations. Tighten the studs to 22-Y(16-lb-ft). Install EN-49248 remover-(2) onto each stud, and engage the hooks to the fuel rail. Install the nuts-(3) retaining there mover onto the studs and tighten until snug. | Step 3. Note: EN-49248 will assist in the proper removal of the fuel rail assembly. Ensure that the following conditions are met: Turn the handles simultaneously in order to pull the fuel rail straight out along the fuel injector axis. DO NOT twist when pulling out on the fuel rail and injector assembly. Using EN-49248 remover, remove the fuel rail assembly-(1). |
Fits for 2010 - 2017 GM 2.0L & 3.6L engines with Hitachi Fuel Injectors; Fit for 2012 - 2017 GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch,Continental and Delphi Fuel injectors; Fit for 2016 Holden Colorado 7 ; Fit for 2014-2019 Subaru 2.0L/2.4L turbo engines.
6706 Injector Rail Assembly Remover Tool
Universal Fit for most of vehicles. Fit for 27 - 214 General Motors direct injection vehicles. Also fit for select Cadillac, Saturn, Pontiac and Chevrolet direct injection engines, 27 - 214. 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.Note: If you are working on a 5.3L or 6.2L you will need 2 sets. (See following for specify model)
Function
GM245 Fuel Injector Seals Tool is used to replace the fuel injector Teflon O Ring Seals without damage or leakge. 6706 Injector Rail Assembly Remover Tool is used to evenly loosen the seat rings of all injectors and remove the direct injection fuel rail without damaging other parts.
Superior Material
Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant.
Replacement
GM245 Fuel Injector Seals Tool interchanges with part number EN-49245, EN-51105, 18683AA000 both in function and performance. 6706 Injector Rail Assembly Remover Tool replaces for part number EN-49248.
Premium Material
Made from quality steel, precision cutting to make each part is manufactured to specifications using.
High precision and hardness ensure reliable long-term service.
Package Includes
1 × Seal Sizer
1 × Installer Pusher
2 × Long Seal Installer Guide
2 × Short Seal Installer Guide
GM245 Fuel Injector Seals Tools
Fits for General Motors 2.0L & 3.6L engines with Hitachi fuel injectors [2010-2017];
Fits for GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch, Continental Delphi fuel injectors [2012-2017];
Fits for Subaru 2.0L/2.4L turbo engines [2014-2019].
Fits for Holden Colorado 7 2016
Features
- Used for replacing the fuel injector Teflon O Ring Seals.
- Installs the dual seals onto the end of the injector to ensure proper injector installation.
- Comparable to #EN-4924, EN-51105, 18683AA000, 18683A.
- Used for the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances.
- Once the engine has been run, injector and rail removal is very difficult, and the assembly must be removed as straight as possible to prevent the chance of damaging an injector bore in the cylinder head, or to the mount assembly.
- Each mount assembly contains an isolator, and cannot have any force applied to the mount for removal.
Easily remove and replace the old seals for reusing an injector
|
|
|
|---|---|---|
Step 1. Cut off the old Teflon seal near the tip of the injector; | Step 2. Place the pilot cone on the tip of the injector; | Step 3. Push the new seal on the cone; |
|
|
|
|---|---|---|
Step 4. Use the installer pusher to push the seal into the groove of the injector; | Step 5. Use the seal sizer tool to compress the Teflon seal to the correct size; | Step 6. Finish! (EN-49245 must be used to install the seals correctly and to ensure they are sized correctly for leak-free operation.) |
6706 Injector Rail Assembly Remover Tool
Universal Fit for most of vehicles.
Fits for 2007 - 2014 General Motors direct injection vehicles.
Fits for Cadillac Saturn Pontiac Chevrolet direct injection engines,
Fits for 2007 - 2014 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.
Note: If you are working on a 5.3L or 6.2L you will need 2 sets.
- Similar to EN-49248 and compatible with OTC 6706.
- This Tool installs in place of the mounting bolts, and reaches under the injector rail near each mount location.
- The hand wheels on this tool at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head and rail mount assemblies.
- Helps properly remove the direct injection fuel rail without damage.
Usage Guide
|
|
|
|---|---|---|
Step 1. Remove the fuel injection fuel rail noise shield. Disconnect the electrical harness from the fuel rail harness connection. Disconnect all 4-fuel injector electrical connections. Remove the fuel rail assembly retaining bolts. Note: Use care to avoid contact with the fuel rail harness during special tool installation and fuel rail removal. | Step 2. Install EN-49248studs (1) into the 2 center fuel rail assembly retaining bolt locations. Tighten the studs to 22-Y(16-lb-ft). Install EN-49248 remover-(2) onto each stud, and engage the hooks to the fuel rail. Install the nuts-(3) retaining there mover onto the studs and tighten until snug. | Step 3. Note: EN-49248 will assist in the proper removal of the fuel rail assembly. Ensure that the following conditions are met: Turn the handles simultaneously in order to pull the fuel rail straight out along the fuel injector axis. DO NOT twist when pulling out on the fuel rail and injector assembly. Using EN-49248 remover, remove the fuel rail assembly-(1). |
- Interchange Part Number: 6707, Alternative to EN-49248
- Type: Direct
- Manufacturer Part Number: Does not apply
- Number of Pieces: Set
- Fitment Type: Direct Replacement
- Brand: DW-Auto
- Manufacturer Warranty: 1 Year
- Country/Region of Manufacture: Unknown
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.