Cerma Gasoline/Diese
Cerma Gasoline/Diese
Cerma Gasoline/Diese
You are buying 1ea. 2oz. bottle of Cerma with STM-3 (one time) Diesel or Gasoline Engine Treatment
Treats one gasoline engine or small diesel engine. for large diesel engines look for dosage amounts required on Cerma website
Finally!! Anti-Friction products that actually live up to or exceed the manufacturer's claims.
Cerma products come with a Money back warranty and your equipment is protected by a Mil $ insurance cert.
All Cerma with STM-3 products are environmentally safe and do not contain any solvents or PTFE's
Cerma with stm-3® Cermax® are trademarks of Motor works LLC all rights reserved 2001-2010Cerma with STM-3 Benefits
Restores Like new performance
- Increases horsepower
- Increases compression
- Increases torque
- Increases fuel economy
- Reduces emission gases
- Reduces Black smoke
- Reduces carbon deposits
- Decreases engine vibration and noise (harmonics)
- Steadies mirror vibration
- Reduces the wear of engine and transmission
- Reduces Turbo lag
- Increases Turbo Life
- Reduces/stops- Injector sticking
Taken from Driver Testimonial : " I would estimate a 5-7 percent increase in fuel economy.This truck has stopped smoking,now runs very smooth and quiet and has a lot more power. I haul cattle, and the last time I was coming through Detroit, I wanted to pull over to check if my trailer was open and the critters were getting out. It was like the trailer wasn't there at all. Very noticable pulling improvement."
__________________________________________________________________________________________________
Third party testing has shown the use of Cerma with STM-3 within your engine can reduce emissions by as much as 92%,friction by as much as 80%, harmonics by as much as 98% and reduce negative opacity up to 100% all within 150 miles after adding Cerma with STM-3 to your engine.
Cerma with STM-3 for Diesel Engines
utilizes ceramic technology to form a micro-ceramic seal "SiC" on all
metal parts within your engine. This will not allow the formation of
performance degrading sludge and abrasive carbon. Cerma with STM-3
will restore lost power to your diesel engine, while giving you
unmatched protection!
What is Cerma with STM-3? If you have ever used a carbide tipped saw blade or drill bit you can appreciate having all the engine surfaces treated in a similar way. Silicon Carbide, "SiC" aka "STM-3 ®Silicon Carbide (SiC) was originally produced by a high temperature electro-chemical reaction of sand and carbon.
Silicon
carbide is an excellent surface protector. This Non Newtonian creation with STM-3® has been
developed into a high quality technical grade SiC with highly
beneficial mechanical properties. It is used in various high-performance
applications. Structural and wear applications are constantly
developing and seemingly endless. Key properties of SiC / STM-3 include:
low density, high strength, low thermal expansion, high thermal
conductivity, high hardness, high elastic modulus, excellent thermal
shock resistance, and superior chemical inertness. Typical uses of SiC
are stationary or dynamic turbine components, seals, bearings, process
equipment, engine components, custom coating for professional racing
engines. Silicon carbide is composed of a tetrahedral structure of
carbon and silicon atoms with strong bonds in a crystalline lattice.
This produces a hardened, durable material. Silicon carbide does not
react with any acids, alkalies or molten salts up to 800°C. In air, SiC
forms a protective silicon oxide coating and can be used up to 1600°C.
The high thermal conductivity coupled with low thermal expansion and
superior strength create an exceptional material with thermal shock
resistant qualities. Silicon carbide SiCs with little or no grain
boundary impurities maintain their strength in very high temperatures
approaching 1600°C.
Chemical purity, resistance to chemical attack at high temperatures, and strength retention
at high temperatures has made this material very popular as a metal
treatment. Although the process of producing and coating materials with
SiC is normally very expensive and involves many steps to achieve the
final product. Motor Works, Inc. has developed a new process for
achieving the properties of SiC coatings in a simple one-time
application. In 2001, Motor Works, Inc. along with its chief chemist
John Murray set out to develop a simple chemical reaction to achieve SiC
coatings. By utilizing the acids and carbon within the engine oil, Mr.
Murray was able to create a SiC coating that is created within the
engine without the expense of removing engine components and sending
them to a coating shop to be coated with SiC baked coating. After more
than 5 years of research and development, Motor Works, Inc. accomplished what was said to be impossible; SiC coatings that are created within the operating environment ofthe equipment being treated. Thus the equipment operator receives all the benefits of SiC coatings without the high cost.
More great products, well worth the cost, from Moreco Energy LLC
| Brand: | Cerma |
|---|---|
| Isin: | ID9ZFZBO6JS5 |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
You are buying 1ea. 2oz. bottle of Cerma with STM-3 (one time) Diesel or Gasoline Engine Treatment
Treats one gasoline engine or small diesel engine. for large diesel engines look for dosage amounts required on Cerma website
Finally!! Anti-Friction products that actually live up to or exceed the manufacturer's claims.
Cerma products come with a Money back warranty and your equipment is protected by a Mil $ insurance cert.
All Cerma with STM-3 products are environmentally safe and do not contain any solvents or PTFE's
Cerma with stm-3® Cermax® are trademarks of Motor works LLC all rights reserved 2001-2010Cerma with STM-3 Benefits
Restores Like new performance
- Increases horsepower
- Increases compression
- Increases torque
- Increases fuel economy
- Reduces emission gases
- Reduces Black smoke
- Reduces carbon deposits
- Decreases engine vibration and noise (harmonics)
- Steadies mirror vibration
- Reduces the wear of engine and transmission
- Reduces Turbo lag
- Increases Turbo Life
- Reduces/stops- Injector sticking
Taken from Driver Testimonial : " I would estimate a 5-7 percent increase in fuel economy.This truck has stopped smoking,now runs very smooth and quiet and has a lot more power. I haul cattle, and the last time I was coming through Detroit, I wanted to pull over to check if my trailer was open and the critters were getting out. It was like the trailer wasn't there at all. Very noticable pulling improvement."
__________________________________________________________________________________________________
Third party testing has shown the use of Cerma with STM-3 within your engine can reduce emissions by as much as 92%,friction by as much as 80%, harmonics by as much as 98% and reduce negative opacity up to 100% all within 150 miles after adding Cerma with STM-3 to your engine.
Cerma with STM-3 for Diesel Engines
utilizes ceramic technology to form a micro-ceramic seal "SiC" on all
metal parts within your engine. This will not allow the formation of
performance degrading sludge and abrasive carbon. Cerma with STM-3
will restore lost power to your diesel engine, while giving you
unmatched protection!
What is Cerma with STM-3? If you have ever used a carbide tipped saw blade or drill bit you can appreciate having all the engine surfaces treated in a similar way. Silicon Carbide, "SiC" aka "STM-3 ®Silicon Carbide (SiC) was originally produced by a high temperature electro-chemical reaction of sand and carbon.
Silicon
carbide is an excellent surface protector. This Non Newtonian creation with STM-3® has been
developed into a high quality technical grade SiC with highly
beneficial mechanical properties. It is used in various high-performance
applications. Structural and wear applications are constantly
developing and seemingly endless. Key properties of SiC / STM-3 include:
low density, high strength, low thermal expansion, high thermal
conductivity, high hardness, high elastic modulus, excellent thermal
shock resistance, and superior chemical inertness. Typical uses of SiC
are stationary or dynamic turbine components, seals, bearings, process
equipment, engine components, custom coating for professional racing
engines. Silicon carbide is composed of a tetrahedral structure of
carbon and silicon atoms with strong bonds in a crystalline lattice.
This produces a hardened, durable material. Silicon carbide does not
react with any acids, alkalies or molten salts up to 800°C. In air, SiC
forms a protective silicon oxide coating and can be used up to 1600°C.
The high thermal conductivity coupled with low thermal expansion and
superior strength create an exceptional material with thermal shock
resistant qualities. Silicon carbide SiCs with little or no grain
boundary impurities maintain their strength in very high temperatures
approaching 1600°C.
Chemical purity, resistance to chemical attack at high temperatures, and strength retention
at high temperatures has made this material very popular as a metal
treatment. Although the process of producing and coating materials with
SiC is normally very expensive and involves many steps to achieve the
final product. Motor Works, Inc. has developed a new process for
achieving the properties of SiC coatings in a simple one-time
application. In 2001, Motor Works, Inc. along with its chief chemist
John Murray set out to develop a simple chemical reaction to achieve SiC
coatings. By utilizing the acids and carbon within the engine oil, Mr.
Murray was able to create a SiC coating that is created within the
engine without the expense of removing engine components and sending
them to a coating shop to be coated with SiC baked coating. After more
than 5 years of research and development, Motor Works, Inc. accomplished what was said to be impossible; SiC coatings that are created within the operating environment ofthe equipment being treated. Thus the equipment operator receives all the benefits of SiC coatings without the high cost.
More great products, well worth the cost, from Moreco Energy LLC
- Country/Region of Manufacture: United States
- Country of Manufacture: United States
- Manufacturer Part Number: Does Not Apply
- Brand: Cerma
- Warranty: Yes
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.