AT100M Pro Antenna Tuner 1.8Mhz-30Mhz Automatic Manual Tuning Device 125W Power & Standing Waves Meter Multifunctional Power Meter for HF Radio Support Morse Code Exerciser Function
AT100M Pro Antenna Tuner 1.8Mhz-30Mhz Automatic Manual Tuning Device 125W Power & Standing Waves Meter Multifunctional Power Meter for HF Radio Support Morse Code Exerciser Function
Product Overview
1、【Small and Portable】: This product is small in size, compact in appearance, strong and solid metal housing, but the weight is only 400g, with high portability. 2、【Antenna Tuner \u0026 Standing Wavemeter 2in1 Design】: This product is not only an antenna tuner, but also a power meter, and standing wavemeter, support to display standingwave value, forward power, and reverse power. The power meter mode supports a maximum display of 150W SSB/CW in an untuned state. Please calibrate the standingwave power value of the equipment when using or replacing the radio for the first time. 3、【Powerful Tuning Ability】: Built-in large capacitors and inductance value combinations, greatly improve tuning success rate and reduce the trouble of repeated antenna feed adjustment. The maximum combined value of capacitor is up to 3869pF, and the maximum combined value of inductor is up to 17.21uH. 4、【Morse Code Exerciser】: This product has a 3.5mm headphone jack on the back panel and supports external single-paddle buttons, so you can easily practice Morse code in your spare time. No need to buy a separate Morse trainer, one device does it all. 5、【Manual Tuning and Automatic Tuning】: Two modes of operation are supported: manual tuning and automatic tuning. In automatic mode, if the standingwave exceeds the set value (default 1.80) while monitoring the radio signal, the lowest standingwave is automatically triggered. In manual mode, the capacitance or inductance values can be adjusted to very low standingwave ratios by manually increasing or decreasing the values after automatic tuning or directly. 6、【High Power Resistance】: The product uses wide signal wire, magnetic powderring, fine quality copper wire, rated power resistance of 125W (SSB), and instantaneous peaking power resistance of 120W (SSB mode). It can withstand different power at different frequencies or in different modes, please refer to the manual for details. 7、【6 Kinds of State Interfaces】: Supports 6 status interfaces, including user storage interface, bar power standingwave meter interface, large font interface, standingwave curve interface, power curve interface, relay, and battery voltage status interface. 8、【Built-in Professional Settings】: Supports 13 parameter configurations, suitable for senior players\u0027 depth customization, such as automatic storage number, tuning speed, starting power, starting standingwave, power calibration, standingwave calibration, signal testing, relay testing, and other functions, customize your tuning system. 9、【Built-in Lithium Battery】: The use of a large capacity 3300mAh polymer lithium battery with an untuned standby time of up to 150-200 hours and a tuned average standby time of about 15 hours is very suitable for portable operation while supporting charging via the Type-C interface. The system interface displays the battery voltage and remaining power in real-time, so you can use it outdoors without worrying about running out of power. The number of relays operated at different tuning levels will affect the battery lifespan. 10、【Built-in Buzzer】: Built-in high-power active buzzer, when the standingwave exceeds the set value of the automatic sound \"drop -\" ringing, timely reminds the user to pay attention to the current standingwave, and the product is hung on the tree antenna feed, the sound is still clear. 11、【Wide Applications】: Support various radio stations and antennas, no need for professional data cable, suitable for most radio stations and antennas in the market.
- Free 30-Day Returns
- Full Refund for Damaged or Incorrect Items
- Guaranteed Delivery or Money Back
- Secure Checkout & Fast Support
Product Overview
1、【Small and Portable】: This product is small in size, compact in appearance, strong and solid metal housing, but the weight is only 400g, with high portability. 2、【Antenna Tuner \u0026 Standing Wavemeter 2in1 Design】: This product is not only an antenna tuner, but also a power meter, and standing wavemeter, support to display standingwave value, forward power, and reverse power. The power meter mode supports a maximum display of 150W SSB/CW in an untuned state. Please calibrate the standingwave power value of the equipment when using or replacing the radio for the first time. 3、【Powerful Tuning Ability】: Built-in large capacitors and inductance value combinations, greatly improve tuning success rate and reduce the trouble of repeated antenna feed adjustment. The maximum combined value of capacitor is up to 3869pF, and the maximum combined value of inductor is up to 17.21uH. 4、【Morse Code Exerciser】: This product has a 3.5mm headphone jack on the back panel and supports external single-paddle buttons, so you can easily practice Morse code in your spare time. No need to buy a separate Morse trainer, one device does it all. 5、【Manual Tuning and Automatic Tuning】: Two modes of operation are supported: manual tuning and automatic tuning. In automatic mode, if the standingwave exceeds the set value (default 1.80) while monitoring the radio signal, the lowest standingwave is automatically triggered. In manual mode, the capacitance or inductance values can be adjusted to very low standingwave ratios by manually increasing or decreasing the values after automatic tuning or directly. 6、【High Power Resistance】: The product uses wide signal wire, magnetic powderring, fine quality copper wire, rated power resistance of 125W (SSB), and instantaneous peaking power resistance of 120W (SSB mode). It can withstand different power at different frequencies or in different modes, please refer to the manual for details. 7、【6 Kinds of State Interfaces】: Supports 6 status interfaces, including user storage interface, bar power standingwave meter interface, large font interface, standingwave curve interface, power curve interface, relay, and battery voltage status interface. 8、【Built-in Professional Settings】: Supports 13 parameter configurations, suitable for senior players\u0027 depth customization, such as automatic storage number, tuning speed, starting power, starting standingwave, power calibration, standingwave calibration, signal testing, relay testing, and other functions, customize your tuning system. 9、【Built-in Lithium Battery】: The use of a large capacity 3300mAh polymer lithium battery with an untuned standby time of up to 150-200 hours and a tuned average standby time of about 15 hours is very suitable for portable operation while supporting charging via the Type-C interface. The system interface displays the battery voltage and remaining power in real-time, so you can use it outdoors without worrying about running out of power. The number of relays operated at different tuning levels will affect the battery lifespan. 10、【Built-in Buzzer】: Built-in high-power active buzzer, when the standingwave exceeds the set value of the automatic sound \"drop -\" ringing, timely reminds the user to pay attention to the current standingwave, and the product is hung on the tree antenna feed, the sound is still clear. 11、【Wide Applications】: Support various radio stations and antennas, no need for professional data cable, suitable for most radio stations and antennas in the market.
1、【Small and Portable】: This product is small in size, compact in appearance, strong and solid metal housing, but the weight is only 400g, with high portability. 2、【Antenna Tuner \u0026 Standing Wavemeter 2in1 Design】: This product is not only an antenna tuner, but also a power meter, and standing wavemeter, support to display standingwave value, forward power, and reverse power. The power meter mode supports a maximum display of 150W SSB/CW in an untuned state. Please calibrate the standingwave power value of the equipment when using or replacing the radio for the first time. 3、【Powerful Tuning Ability】: Built-in large capacitors and inductance value combinations, greatly improve tuning success rate and reduce the trouble of repeated antenna feed adjustment. The maximum combined value of capacitor is up to 3869pF, and the maximum combined value of inductor is up to 17.21uH. 4、【Morse Code Exerciser】: This product has a 3.5mm headphone jack on the back panel and supports external single-paddle buttons, so you can easily practice Morse code in your spare time. No need to buy a separate Morse trainer, one device does it all. 5、【Manual Tuning and Automatic Tuning】: Two modes of operation are supported: manual tuning and automatic tuning. In automatic mode, if the standingwave exceeds the set value (default 1.80) while monitoring the radio signal, the lowest standingwave is automatically triggered. In manual mode, the capacitance or inductance values can be adjusted to very low standingwave ratios by manually increasing or decreasing the values after automatic tuning or directly. 6、【High Power Resistance】: The product uses wide signal wire, magnetic powderring, fine quality copper wire, rated power resistance of 125W (SSB), and instantaneous peaking power resistance of 120W (SSB mode). It can withstand different power at different frequencies or in different modes, please refer to the manual for details. 7、【6 Kinds of State Interfaces】: Supports 6 status interfaces, including user storage interface, bar power standingwave meter interface, large font interface, standingwave curve interface, power curve interface, relay, and battery voltage status interface. 8、【Built-in Professional Settings】: Supports 13 parameter configurations, suitable for senior players\u0027 depth customization, such as automatic storage number, tuning speed, starting power, starting standingwave, power calibration, standingwave calibration, signal testing, relay testing, and other functions, customize your tuning system. 9、【Built-in Lithium Battery】: The use of a large capacity 3300mAh polymer lithium battery with an untuned standby time of up to 150-200 hours and a tuned average standby time of about 15 hours is very suitable for portable operation while supporting charging via the Type-C interface. The system interface displays the battery voltage and remaining power in real-time, so you can use it outdoors without worrying about running out of power. The number of relays operated at different tuning levels will affect the battery lifespan. 10、【Built-in Buzzer】: Built-in high-power active buzzer, when the standingwave exceeds the set value of the automatic sound \"drop -\" ringing, timely reminds the user to pay attention to the current standingwave, and the product is hung on the tree antenna feed, the sound is still clear. 11、【Wide Applications】: Support various radio stations and antennas, no need for professional data cable, suitable for most radio stations and antennas in the market.
More Information
Features:
【Small and Portable】: This product is small in size, compact in appearance, strong and solid metal housing, but the weight is only 400g, with high portability.
【Antenna Tuner & Standing Wavemeter 2in1 Design】: This product is not only an antenna tuner, but also a power meter, and standing wavemeter, support to display standingwave value, forward power, and reverse power. The power meter mode supports a maximum display of 150W SSB/CW in an untuned state. Please calibrate the standingwave power value of the equipment when using or replacing the radio for the first time.
【Powerful Tuning Ability】: Built-in large capacitors and inductance value combinations, greatly improve tuning success rate and reduce the trouble of repeated antenna feed adjustment. The maximum combined value of capacitor is up to 3869pF, and the maximum combined value of inductor is up to 17.21uH.
【Morse Code Exerciser】: This product has a 3.5mm headphone jack on the back panel and supports external single-paddle buttons, so you can easily practice Morse code in your spare time. No need to buy a separate Morse trainer, one device does it all.
【Manual Tuning and Automatic Tuning】: Two modes of operation are supported: manual tuning and automatic tuning. In automatic mode, if the standingwave exceeds the set value (default 1.80) while monitoring the radio signal, the lowest standingwave is automatically triggered. In manual mode, the capacitance or inductance values can be adjusted to very low standingwave ratios by manually increasing or decreasing the values after automatic tuning or directly.
【High Power Resistance】: The product uses wide signal wire, magnetic powderring, fine quality copper wire, rated power resistance of 125W (SSB), and instantaneous peaking power resistance of 120W (SSB mode). It can withstand different power at different frequencies or in different modes, please refer to the manual for details.
【6 Kinds of State Interfaces】: Supports 6 status interfaces, including user storage interface, bar power standingwave meter interface, large font interface, standingwave curve interface, power curve interface, relay, and battery voltage status interface.
【Built-in Professional Settings】: Supports 13 parameter configurations, suitable for senior players' depth customization, such as automatic storage number, tuning speed, starting power, starting standingwave, power calibration, standingwave calibration, signal testing, relay testing, and other functions, customize your tuning system.
【Built-in Lithium Battery】: The use of a large capacity 3300mAh polymer lithium battery with an untuned standby time of up to 150-200 hours and a tuned average standby time of about 15 hours is very suitable for portable operation while supporting charging via the Type-C interface. The system interface displays the battery voltage and remaining power in real-time, so you can use it outdoors without worrying about running out of power. The number of relays operated at different tuning levels will affect the battery lifespan.
【Built-in Buzzer】: Built-in high-power active buzzer, when the standingwave exceeds the set value of the automatic sound "drop -" ringing, timely reminds the user to pay attention to the current standingwave, and the product is hung on the tree antenna feed, the sound is still clear.
【Wide Applications】: Support various radio stations and antennas, no need for professional data cable, suitable for most radio stations and antennas in the market.
Attention:
1. Please fully read the product manual and precautions before using the equipment;
2. Before using its own tuning, be sure to adjust the radio power to the lowest power, prevents the damage to the radio or tuning;
3. When using or replacing the radio for the first time, it is necessary to recalibrate the standingwave power value of the equipment. When the standingwave power value displayed by the radio and the equipment is inconsistent, the radio shall prevail;
4. Please use the USB Type-C charging cable included with this product for charging;
5. Keys are not included in the shipping list.
Specifications:
Name: Antenna Tuner
Material: plastics+metal
Battery: 1 * built-in 3300mAh battery (included)
Radio support capabilities: Supports most radio stations and antennas on the market
Frequency/Power: 1.8Mhz-18Mhz SSB/CW 0.1W-125W 1.8Mhz18Mhz Frequency Modulation/AM/FT8 0.1W-50W 18Mhz-30Mhz SSB/CW 0.1W-50W 18Mhız-30Mhz Frequency Modulation/AM/FT80.1W-50W
Automatic memory channel: 60 groups
Maximum combined inductance value: 17.21uH
Maximum combined capacitance value: 3869pF
Standing wavemeter: support
Power meter: Support (0.1W-150W)
Interactive mode: Bar mode, harge font mode, relay mode, power curve graph mode, standingwave curve graph mode, CW exerciser mode, configuration menu mode
Autotune mode: support
Manual tuning mode: support
CW exercises: Supports external 3.5mm headphone jack, single paddle CW practice, supports front panel button trigger
CW propeller interface: 3.5MM headphone jack
Buzzer: Support (automatic prompt when the standingwave exceeds the set value)
Charging interface: USB-TYPE C
Charging time: about 4 hours
Product power: Maximum 5W
Standby time: About 150-200 hours (no tuning action)
Tuning duration: About 10-25 hours (activate 1-3 relays)
Item size: 154 * 74 * 29mm / 6.06 * 2.91 * 1.14in
Item weight: 400g / 0.88lb
Package size: 250 * 125 * 40mm / 9.84 * 4.92 * 1.57in
Package weight: 490g / 1.08lb
Packing List:
1 * Host
1 * TYPE-C Cable
2 * L-Wrench
4 * Pad
1 * English Instruction Manual
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $5.95 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $5.95, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.