Another Amazing Product USA Carbide Hole Saw 6" for Recessed LED Lights Drywall Plaster Ceiling Cement Block
Another Amazing Product USA Carbide Hole Saw 6" for Recessed LED Lights Drywall Plaster Ceiling Cement Block
Another Amazing Product USA Carbide Hole Saw 6" for Recessed LED Lights Drywall Plaster Ceiling Cement Block
6 inch Tungsten Carbide
Grit Edge Hole Saw 152mm with
SDS Plus Arbor
The True Professional's Tool.
The Same Tool We Sell To Tile & Hardware Stores Around The Globe.
1. Must use with TCT Pilot Drill
Check it is Tight.
2. Must Use with Hammer Drill
Unparalleled Quality
Designed For Cutting
Durability That Lasts
Many Of The Applications That These Saw Blades Are Used For Would Bind, Load Up, Or Wear Out The Teeth On Traditional Toothed Blades. With Permanently Bonded Tungsten Carbide Grit, You Can Now Cut Concrete, Brick, Masonry, Slate, Marble, Ceramic Wall Tiles And Much More! These Tools Are Designed To Outlive Other Equivalent Holesaws. They Can Also Be Reversed To Increase Their Lifespan.
Watch Our Demonstration Video!
An Honest And Candid Look At Tungsten Carbide Grit Edge Holesaws.
Material Cutting Chart.
Be Sure To View Our Material Cutting Chart So That You Can Make Sure This Is The Right Tool For You.
Some Materials Require Diamond Hole Saws Which We Also Have Available In Our Store.
If Drilling Concrete with Granite Stones
We advise using our Diamond Range
As Carbide Cannot Cut Granite.
The Power Of Tungsten Carbide Grit. The Gulleted Edge Is Coated With A Permanently Bonded Tungsten Carbide Grit. The Gulleted Edge Increases Cutting Pressure And Allows The Cut Material To Be Removed. They Are Designed To Take Serious Abuse And Will Outlast Any Conventional Hole Saw, They Can Be Used In Corded Or Cordless Drills Even Sds Drills And Are Built And Designed To Cut Both With Or Without Full Hammer Action. They Can Even Cut In Both Directions, They Have A High Heat And Abrasion Resistance. They Are Much Tougher Than Bi Metal Hole Saws And They Have No Teeth To Chip Or Dull Like Regular And Even Carbide Tipped Hole Saws.
From Tough To Brittle And Verything In Between.
These Holesaws Leave A Fine Finish And Can Cut Through Tough Abrasive Materials Like Concrete, Brick, Masonry, Slate, Marble, Ceramic Wall Tiles, Siding, Hardie Board,
Construction Materials Such As Autoclaved Cement Board, Fibre Glass, Composite Boards Such As Chipboard And Mdf, Laminates, Rubber Tires Tyres, Grp, Cfrp, Hardwood Flooring, Laminate Flooring, Plasterboard / Drywall, Soft Resinous Woods And Hard Brittle Materials.
Great For Boat Building.
Extended Life.
Blades Can Be Reversed And Wire Brushed Clean To Increase Life Span. Applying Water To The Cutting Edge Whilst Running With Squirty Bottle Will Minimize Dust And Keep The Cutting Tool Cool. Whilst Not Required This Can Substantially Increase The Life Span Of The Cutting Edge. Note: Keep Water And Fluids Away From The Electrical Tools And Devices!
Mandrel / Arbor And Pilot Drill Compatibility.
These Hole Saws Take Standard Mandrels / Arbors But Ourarbors Come Complete With Tct Pilot Bits Which Are Replaceable,
After All What's The Point Having A Hole Saw That Can Cut Through Concrete If The Pilot Drill Cannot!
The Following Mandrels Are Compatible With This Holesaw:
They Fit Hole Saws 1 1/4" (32mm) Up To 6" (152mm) Or More. It Has A Thread Size Of 5/8" Which Is Also A Standard Size.
SDS Plus Mandrels Are Available For Those With Sds Drills.
Other Sizes Available
5/8" Carbide Holesaw 16mm
3/4" Carbide Holesaw 19mm
7/8" Carbide Holesaw 22mm
1" Carbide Holesaw 25mm
1 1/8" Carbide Holesaw 29mm
1 1/4" Carbide Holesaw 32mm
1 3/8" Carbide Holesaw 35mm
1 1/2" Carbide Holesaw 38mm
1 5/8" Carbide Holesaw 41mm
1 3/4" Carbide Holesaw 44mm
1 7/8" Carbide Holesaw 48mm
2" Carbide Holesaw 51mm
2 1/8" Carbide Holesaw 54mm
2 1/4" Carbide Holesaw 57mm
2 3/8" Carbide Holesaw 60mm
2 1/2" Carbide Holesaw 64mm
2 5/8" Carbide Holesaw 67mm
2 3/4" Carbide Holesaw 70mm
2 7/8" Carbide Holesaw 73mm
3" Carbide Holesaw 76mm
3 1/4" Carbide Holesaw 83mm
3 3/8" Carbide Holesaw 86mm
3 1/2" Carbide Holesaw 89mm
3 3/4" Carbide Holesaw 95mm
4" Carbide Holesaw 102mm
4 1/4" Carbide Hole Saw 108mm
4 3/8" Recessed Light Hole Saw 111mm
4 1/2" Carbide Holesaw 114mm
5" 127mm Recessed Light Hole Saw
6" Carbide Holesaw 152mm
6 3/8" Recessed Light Hole Saw 162mm
6 5/8" Recessed Light Hole Saw 168mm
12" Arbor Extension 3/8" Hex Male to Female
12" Arbor Extension 7/16" Hex Male to Female
12" SDS Plus Male to 7/16 Hex Female Extendsion
TCT Pilot Drills 1/4" Shaft
7/16 Hex Arbors
SDS Plus Arbors
| Brand: | Another Amazing Product USA |
|---|---|
| Isin: | ITBXWXWL5ERW |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
6 inch Tungsten Carbide
Grit Edge Hole Saw 152mm with
SDS Plus Arbor
The True Professional's Tool.
The Same Tool We Sell To Tile & Hardware Stores Around The Globe.
1. Must use with TCT Pilot Drill
Check it is Tight.
2. Must Use with Hammer Drill
Unparalleled Quality
Designed For Cutting
Durability That Lasts
Many Of The Applications That These Saw Blades Are Used For Would Bind, Load Up, Or Wear Out The Teeth On Traditional Toothed Blades. With Permanently Bonded Tungsten Carbide Grit, You Can Now Cut Concrete, Brick, Masonry, Slate, Marble, Ceramic Wall Tiles And Much More! These Tools Are Designed To Outlive Other Equivalent Holesaws. They Can Also Be Reversed To Increase Their Lifespan.
Watch Our Demonstration Video!
An Honest And Candid Look At Tungsten Carbide Grit Edge Holesaws.
Material Cutting Chart.
Be Sure To View Our Material Cutting Chart So That You Can Make Sure This Is The Right Tool For You.
Some Materials Require Diamond Hole Saws Which We Also Have Available In Our Store.
If Drilling Concrete with Granite Stones
We advise using our Diamond Range
As Carbide Cannot Cut Granite.
The Power Of Tungsten Carbide Grit. The Gulleted Edge Is Coated With A Permanently Bonded Tungsten Carbide Grit. The Gulleted Edge Increases Cutting Pressure And Allows The Cut Material To Be Removed. They Are Designed To Take Serious Abuse And Will Outlast Any Conventional Hole Saw, They Can Be Used In Corded Or Cordless Drills Even Sds Drills And Are Built And Designed To Cut Both With Or Without Full Hammer Action. They Can Even Cut In Both Directions, They Have A High Heat And Abrasion Resistance. They Are Much Tougher Than Bi Metal Hole Saws And They Have No Teeth To Chip Or Dull Like Regular And Even Carbide Tipped Hole Saws.
From Tough To Brittle And Verything In Between.
These Holesaws Leave A Fine Finish And Can Cut Through Tough Abrasive Materials Like Concrete, Brick, Masonry, Slate, Marble, Ceramic Wall Tiles, Siding, Hardie Board,
Construction Materials Such As Autoclaved Cement Board, Fibre Glass, Composite Boards Such As Chipboard And Mdf, Laminates, Rubber Tires Tyres, Grp, Cfrp, Hardwood Flooring, Laminate Flooring, Plasterboard / Drywall, Soft Resinous Woods And Hard Brittle Materials.
Great For Boat Building.
Extended Life.
Blades Can Be Reversed And Wire Brushed Clean To Increase Life Span. Applying Water To The Cutting Edge Whilst Running With Squirty Bottle Will Minimize Dust And Keep The Cutting Tool Cool. Whilst Not Required This Can Substantially Increase The Life Span Of The Cutting Edge. Note: Keep Water And Fluids Away From The Electrical Tools And Devices!
Mandrel / Arbor And Pilot Drill Compatibility.
These Hole Saws Take Standard Mandrels / Arbors But Ourarbors Come Complete With Tct Pilot Bits Which Are Replaceable,
After All What's The Point Having A Hole Saw That Can Cut Through Concrete If The Pilot Drill Cannot!
The Following Mandrels Are Compatible With This Holesaw:
They Fit Hole Saws 1 1/4" (32mm) Up To 6" (152mm) Or More. It Has A Thread Size Of 5/8" Which Is Also A Standard Size.
SDS Plus Mandrels Are Available For Those With Sds Drills.
Other Sizes Available
5/8" Carbide Holesaw 16mm
3/4" Carbide Holesaw 19mm
7/8" Carbide Holesaw 22mm
1" Carbide Holesaw 25mm
1 1/8" Carbide Holesaw 29mm
1 1/4" Carbide Holesaw 32mm
1 3/8" Carbide Holesaw 35mm
1 1/2" Carbide Holesaw 38mm
1 5/8" Carbide Holesaw 41mm
1 3/4" Carbide Holesaw 44mm
1 7/8" Carbide Holesaw 48mm
2" Carbide Holesaw 51mm
2 1/8" Carbide Holesaw 54mm
2 1/4" Carbide Holesaw 57mm
2 3/8" Carbide Holesaw 60mm
2 1/2" Carbide Holesaw 64mm
2 5/8" Carbide Holesaw 67mm
2 3/4" Carbide Holesaw 70mm
2 7/8" Carbide Holesaw 73mm
3" Carbide Holesaw 76mm
3 1/4" Carbide Holesaw 83mm
3 3/8" Carbide Holesaw 86mm
3 1/2" Carbide Holesaw 89mm
3 3/4" Carbide Holesaw 95mm
4" Carbide Holesaw 102mm
4 1/4" Carbide Hole Saw 108mm
4 3/8" Recessed Light Hole Saw 111mm
4 1/2" Carbide Holesaw 114mm
5" 127mm Recessed Light Hole Saw
6" Carbide Holesaw 152mm
6 3/8" Recessed Light Hole Saw 162mm
6 5/8" Recessed Light Hole Saw 168mm
12" Arbor Extension 3/8" Hex Male to Female
12" Arbor Extension 7/16" Hex Male to Female
12" SDS Plus Male to 7/16 Hex Female Extendsion
TCT Pilot Drills 1/4" Shaft
7/16 Hex Arbors
SDS Plus Arbors
- Number of Items in Set: 1
- Custom Bundle: No
- Color: Silver
- Item Diameter: 6 in
- MPN: HOLETCG152, HOLETCG152SDS
- Material: Carbide
- Item Length: 1 9/16 in
- Suitable For: Backer Board, Cement, Cement Block, Cement Board, Commercial, Composites, Concrete, Drill, Drywall, FiberGlass, Hardie Board, Marble, Plaster, RECESSED LIGHTING, RECESSED LIGHTS, Travertine, Wall Tile
- Brand: Another Amazing Product USA
- Type: Carbide Hole Cutter, Carbide Hole Saw, Concrete Hole Saw, Drill Bit, Drywall Hole Cutter, Grit Hole saw, Hole Saw, Tungsten Hole Saw
- Model: HOLETCG152SDS
- Package Quantity: 1
- Application: Cutting, Drilling Holes in Brick, Drilling Holes in Cement, Drilling Holes in Concrete, Drilling Holes in Drywall, Drilling Holes in Fiberglass, Drilling Holes in Masonry, Drilling Holes in Pavers, Drilling Holes in Plaster
- Item Width: 6 in
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.