24pcs Professional Magnetic Therapy Vacuum Suction Cupping Set Body Treatment Cupping Device

Condition: 100% Brand New
Item Type: Cupping Therapy Set
Material: ABS
Product Size:
No. 1 Cup (4pcs): Outer Diameter: Approx. 6.8cm / 2.7in, Inner Diameter: Approx. 5.6cm / 2.2in
No. 2 Cup (4pcs): Outer Diameter: Approx. 6cm / 2.4in, Inner Diameter: Approx. 4.8cm / 1.9in
No. 3 Cup (4pcs): Outer Diameter: Approx. 5.1cm / 2in, Inner Diameter: Approx. 4.1cm / 1.6in
No. 4 Cup (4pcs): Outer Diameter: Approx. 4.2cm / 1.7in, Inner Diameter: Approx. 3.2cm / 1.3in
No. 5 Cup (4pcs): Outer Diameter: Approx. 3.4cm / 1.3in, Inner Diameter: Approx. 2.4cm / 0.9in
No. 6 Cup (4pcs): Outer Diameter: Approx. 3cm / 1.2in, Inner Diameter: Approx. 2cm / 0.8in

The Role and Use of Cupping Device:
Cupping marks pigment reflects as follows:
1. The cupping marks is purple, black and dark: Generally, it indicates insufficient blood supply and blood stasis due to poor menstruation.
2. The cupping marks is purple and accompanied by plaques: it generally indicates cold coagulation and blood stasis.
3. The cupping marks are scattered with purple dots, and the depth is different, which means stagnation of Qi and blood stasis.
4. Cupping marks is bright red and bright: generally it means yin deficiency, qi and blood deficiency or fire excess from yin deficiency.
5. Cupping marks is red and dark: it means high blood fat and heat evil.
6. The marks of cupping is gray and white, not warm to the touch, mostly due to cold or dampness.
7. There are dermatoglyphs or slight itching on the surface of the cupping marks: it means wind evil or dampness.
8. There is moisture on the inner wall of the tank: it means that there is moisture in the part.
9. Blisters appear in the cupping marks, indicating heavy moisture in the body. If there is blood in the blisters, it is reactions of damp heat toxin.

Usage:
1. Choose acupuncture points according to the condition of the disease (refer to the selection of acupoints for the disease) The selection of acupoints is explained as follows:
Ashi point is the most obvious pain point (not marked in treatment reference point selection diagram). Treatment refers to the acupuncture points indicated in the acupoint selection diagram, which are located on the front and back midline of the human body. The acupoints on the Ren and Du channels are single acupoints. The other acupoints are arranged symmetrically. Only one side is indicated in the chart, and both acupoints should be used during treatment. When selecting acupuncture points, it can be divided into two groups according to the acupoints listed in treatment reference point selection, and one group is used in rotation every day.
2. Choose appropriate tanks and a comfortable position (can be divided into sitting, supine, side and prone positions)
3. Lift up the top piston of the selected tank to assure ventilation.
4. After gently covering the negative pressure muzzle with the piston on the top of the tank, pull the rod vertically and quickly several times until the skin in the cupping bulges, which can be tolerated by the patient.
5. Connectors can be used in parts that cannot be cupped directly (such as spine, waist)
Connector installation method: first connect the big end of the connecting rod at one end of the connector to the large hole of the spare front mouth, and then connect the small end of the connecting rod at the other end to the negative pressure muzzle to make it into one body, and then the front mouth and the cupping piston Put the heads together and place the cupping on the area that needs treatment. The same operation as 4 will cupping and attach to the body surface.
6. After the canister is adsorbed on the body surface, gently rotate the negative pressure muzzle left and right to back down, and press the canister piston to prevent air leakage.
7. Cupping can be divided into the following types:
a. Retention method: Put the cupping on the skin for about 10 minutes, about 3 minutes for children, about 5 minutes for girls, and about 7 minutes for women. Those with delicate skin can be limited according to the tolerance of the body. Take up the cup when the skin at the cupping site is congested and congested. If the cupping is large and the suction and pulling force is strong, the time of keeping the cup can be shortened appropriately. The cupping time for severely ill, deep and painful patients can be slightly longer, and for mild, shallow and paralytic diseases, the cupping time should be short; the time for thicker muscles can be longer, and the time for thin muscles should be shorter; in winter, cupping time can be slightly longer. Long, short summer, this is the most commonly used method, can be used for general diseases.
b. Can-moving method: also known as pushing can and moving can. That is, before cupping, spray the traditional Chinese medicine Tongluoning on the skin of the pulled part or the cupping mouth, pull the cupping, and then push and pull the cupping device back and forth along the meridians or the line that needs cupping, until the skin of the pulled part is ruddy, congested or even When congestion occurs, remove the cupping. This method can play a dual role of cupping or scraping. It is suitable for areas with large areas, slick skin and rich muscles, such as the spine, waist and kidneys, and thighs.
c. Flash pot method: After the pot is pulled out, immediately get up and down, so repeatedly pull up and down, up and down, and hold until the skin flushes. This method is generally used for areas that are not very flat and easy to cupping off, as well as areas that are not easy to leave bruises, such as the face.
8. Just lift the piston at the end of treatment.
9. Course of treatment: five days for children and seven days for adults. Three days apart, continue to the next course of treatment.
10. Routinely wipe the cupping device with disinfectant and ethanol cotton after use. Do not soak, boil or heat treatment, etc.
11. When the cupping therapy cannot be pulled out, please check whether the rubber plug in the cupping is tightly sealed, whether the connection between the negative pressure gun and the cupping is too tight, whether the negative pressure gun and the cupping are vertical, and whether the negative pressure gun and cupping exert too much pressure on the skin.

Note:
1. When cupping, you should choose a proper body position and a place with full muscles, slick skin, and no hair. According to the required cupping position, choose different specifications of pots. If you really need to cup on uneven and hairy parts, you can use a ring pad to pad under the cupping mouth, to prevent air leakage or select special-shaped cupping. If the skin is dry, moisten the skin before cupping.
2. In the first treatment, the patient should use small cupping first, and use cupping for light stimulation.
3. Do not move your body position after putting the cup. When using multi-cupping therapy, keep a certain distance between cupping and cupping, and should not arrange them too close.
4. Acute high fever, coma, convulsions, etc., critically ill patients should be clearly diagnosed first to avoid delaying the timing of treatment.